This kit allows you to get rid of the diaphragm and pressure plate and replace it with a single piece with six fine-tuned springs for better control and stronger engagement of the clutch. A must have when you install performance parts on your Roadstar, this kit will make sure that your clutch will not slip. The installation is straightforward and doesn't require special tools. You will need to replace the clutch cover gasket. We can provide the orginal Yamaha gasket and save you a trip to the dealership. See part #5PX-15451-00-00

*Gasket fits Roadstar only

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Teflon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: 1600/1700 Road Star/Siverado/Limited Edition 1999+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Teflon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: 1600/1700 Road Star/Silverado/Limited Edition 1999-2004

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Teflon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: 1700 Road Star/Silverado 2005+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Teflon clearcoat is guaranteed to not discolor from sunlight exposure. The Platinum Series is a bright silver plated braid. Barnett has provided Motorcycle cables since 1948. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: 1600/1700 Road Star/Siverado/Limited Edition 1999+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Teflon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: 1600/1700 Road Star/Siverado/Limited Edition 1999-2004

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: 1700 Road Star/Siverado 2005+

When installing a HSR carburetor on you Roadstar you need a set of cables that fits. We took care of figuring out the fittings and all the other details about this and we offer a set of beautifully braided throttle cables covered in clearcoat forprotection of your paint and chrome. Available in any length, we have some pre-made "cuts" for most applications. Call us for custom lengths.

Note: these cables are available only as part of an order with the HSR carburetor or as a replacement for our customers.

These Stainless steel cables are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

High performance Carbon-Fiber plates for your RoadStar. This kit includes a replacement set of friction plates to give you better clutch control and more "grabbing" power.High performance Carbon-Fiber plates for your RoadStar. This kit includes a replacement set of friction plates to give you better clutch control and more "grabbing" power.

You will need also to replace the clutch cover gasket - see part #5PX-15451-00-00

When installing a HSR carburetor on you Roadstar you need a set of cables that fits. We took care of figuring out the fittings and all the other details about this and we offer a set of beautifully braided throttle cables covered in clearcoat forprotection of your paint and chrome. Available in any length, we have some pre-made "cuts" for most applications. Call us for custom lengths.

Note: these cables are available only as part of an order with the HSR carburetor or as a replacement for our customers.

These Stainless steel cables are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.