• 0-8000 RPM
• Installed in a chrome billet aluminum case
• Available with a black or white face
• Available for 1", 1 1/4" and 1 1/2" handlebars
• Adapter available to make tachometer compatible with twin coils

• Available in both Black and White Face and White Face w/Lumiglow.
• Bridge mount for 1" bars.
• 0-8000 RPM.
• Installed in a chrome billet aluminum case.
• Adapter available to make tachometer compatible with twin coils

Replaces the ugly black plastic stock guard with a beautiful chrome guard complete with window for checking the belt tension.

• Here's a nice shiny piece of chrome to spice up your bike and make it set apart from the other bikes
• Must drill fender to install
  

• Fits under the dash.
• Machined from aluminum and formed to follow the curve of your gas tank

Cover the "raw" fron axle with these fork tips. Easy to install, they will add a touch of chrome in a often overlooked area.

Beautiful trim that hides the space between the gas tank and the frame.

Beutifully shaped from steel and chrome to a shiny luster, this cover will hide all the ugly hoses and parts of the rear master cylinder of your RoadStar. Installs in minutes.

Adjustable forward and backward by 3 inches. Folds forward for passenger access. Solidly bolted to the bike. Compatible with Custom World hard bags and Leatherlyke. Fits with stock seat (will also fit with the Saddlemen Solo seat)Adjustable forward and backward by 3 inches. Folds forward for passenger access. Solidly bolted to the bike. Compatible with Custom World hard bags and Leatherlyke. Fits with stock seat (will also fit with the Saddlemen Solo seat)

• Made to hide and protect the front of the motor.
• Show chrome.
  
• Attaches directly to the frame.

• Sold in pairs.
• Chromed billet aluminum.
• Fit on OEM floorboards.
• Pivots back and forth 5� or 12.7 cm.
• Anti-vibration rubbers.

Want to improve the look of your Roadie and at the same time improve the riding experience of your passenger ? These floorboards are made of billet aluminum and topped with show chrome finish.

• Billet aluminum.
• Designed specifically for each model.
• Show chrome finish.

• The style of the rubber pad goes well with CWI and most OEM floorboards.
• Designed to provide maximum comfort for each model.
• Exceptional chrome finish.
• Billet aluminum.

This new Heelrest is designed to obtain a different leg position during long rides. Fits on most types of floorboards. Can be installed almost anywhere on the side of the floorboard. Some models might require drilling. Show chrome finish, sold in pairs.

Add a beautiful set of passing lights to your RoadStar. Add the Smart Switch to turn the lights on when you desire in combination with either high or low beams. Lights included. There are two styles of lights available for this light bar: Standard and Option D. The latter uses the exact same bracket but the passing lights are deeper, grooved on the sides, and have a small, built-in visor. The deeper bucket means that they will not fit a windshield without cut-outs. The Standard style will fit the stock windshield. These lightbars connect to your bike using the standard mountpoint of the headlight and the turn signal bar. You will need to use the stock turn signal bar. Add a beautiful set of passing lights to your RoadStar. Add the Smart Switch to turn the lights on when you desire in combination with either high or low beams. Lights included. There are two styles of lights available for this light bar: Standard and Option D. The latter uses the exact same bracket but the passing lights are deeper, grooved on the sides, and have a small, built-in visor. The deeper bucket means that they will not fit a windshield without cut-outs. The Standard style will fit the stock windshield. These lightbars connect to your bike using the standard mountpoint of the headlight and the turn signal bar. You will need to use the stock turn signal bar.

• Fits on all CWI backrests (square and tubular)
• Larger and longer for more storage
• Billet aluminum
• No Welds
• Dimensions: 10" L x 12" W
  

• Made to add style to your bike
• Max load 2.2lb (1kg)
• Includes mounting kit

Designed to work with the Yamaha sissy bars.

• Stylish curved luggage rack
• Beautiful chrome finish
  

• Show chrome finish
• 3 sizes available: 3", 4", and 5"
• 1-1/2 pullback
  

These side arms can be used to mount both square and round sissy bars by Custom World. All the bolts required to mount the hardware to your bike are included. Also included are spacers to allow the mounting of the backrest without the luggage rack and nylon washers to protect the fender paint. The side arms are mounted between the fender and the "eyebrows" of your RoadStar, see picture.

• Replaces OEM sissy bar without removing mount kit.
• Gives passenger security without a backrest.
• May be installed with a luggage rack (not included).
• For OEM backrest.

Square sissy bar with pads. Several styles of pads, including: mini, standard and large. Mounting kit required.Square sissy bar with pads. Several styles of pads, including: mini, standard and large. Mounting kit required.

Beatiful completement to the Custom World round back rest. Comes in choice of smooth or Eagle logo style.

• Tubular bar is wider at the top
• Different look for modern motorcycles
• Two sizes of pad available with optional studs
• 3 inches of adjustment at the top for personalized comfort for the passenger.

• Compatible with CWI backrests as well as others with exterior mount bolts.
• Made for CTR to CTR distance of 1 1/4" to 2 3/8"
  making them compatible with most backrests.
• They move outwards to ease access.
• The angle is adjustable to work with most backrests.
• Mount kit included for CWI and certain OEM backrest.

Attaches to the Custom World mount kit. Replaces backjrest when you don't have a passenger (and it's still handy for the occasional hitchicker).

Back plate for square sissy bars. Comes in mini size with logo or standard size in either smooth or logo style. The standard backplate fits both standard and large pad square sissy bars.

If you want to give that "solo" look to your bike without buying a new rear feander, here is the solution for you. Remove the passenger pillion and put this bueatifully chromed solo rack in it's place.If you want to give that "solo" look to your bike without buying a new rear feander, here is the solution for you. Remove the passenger pillion and put this bueatifully chromed solo rack in it's place.

• Solo rack replaces passenger pillion
• Uses existing mounting holes
• Chrome
  

• 0-8000 RPM
• Lumiglow available in white face only
• Installed in a chrome billet aluminum case
• Available for 1", 1 1/4" and 1 1/2" handlebars
• Adapter available to make tachometer compatible with twin coils

Tired of cleaning those spokes? Just apply these wheel covers for a great custom look!Tired of cleaning those spokes? Just apply these wheel covers for a great custom look!

• Easier to keep your wheels clean
• Made to cover spoke wheels
• Add style to your bike
• Give the look of solid wheels

• Made to hide and protect the front of the motor.
• Show chrome.
  
• Attaches directly to the frame.

Tired of cleaning those spokes? Just apply these wheel covers for a great custom look!Tired of cleaning those spokes? Just apply these wheel covers for a great custom look!

• Easier to keep your wheels clean
• Made to cover spoke wheels
• Add style to your bike
• Give the look of solid wheels

• Show chrome finish
• 3 sizes available: 3", 4", and 5"
• 1-1/2 pullback