• Seven positions for comfort*: 7 position choices allows positioning for optimum comfort. Provide up to 6" more legroom.
• Multiple tilt angles*: Boards tilt to relieve stress in the thighs, calves and ankles by taking the flex out of the calf.
• Style: beautifully polished and finished with brilliant chrome. Available in "Enferno" or the more traditional "Solid" styles.
• Comfort: 8-½” x 3-½” surface area and vibration reducing anti-slip rubber pads provide comfort and solid foot support.
• Body control: Additional body control is provided by board's design, improving user confidence.
• Fold up: The boards fold up when not in use, adding an additional splash of brilliant chrome.
• Rider or Passenger: Usage depends on mount kit.
• Matching sets: Baron’s matching Rider Long Boards, offering similar adjustability, may be added to give you a matching set.

*Please note: Adjustability may vary by model depending on accessories and whether boards are used for rider or passenger.

Mounting Brackets required. Sold separately.

Fitment: Warrior 02+

Mount directly to your stock footpeg mounts and allow the attachment of our Longboards and Shortboards. (Sold as set of 2)

Bike Fitment: Warrior 02+

These uniquely designed floorboards were created to allow riders to change their Yamaha Warrior equipped with Pegs over to a more comfortable floorboard. Easy to install, these floorboards are a direct replacement for the stock pegs. Simply remove the cotter pin and pull the pivot from the peg clevis mount, insert the new Baron Floorboard in the clevis, insert the pivot and replace the cotter pin. Now, you’re ready to ride away in comfort. You will find noticeable improvements in cornering due to the ability the boards afford the rider to better shift their weight.

• Comfort angle: Boards mount with a slight tilt to relieve stress in the thighs, calves and ankles.
• Handling: Improved handling is found through the ability the boards afford the rider in shifting and transferring their weight while cornering.
• Style: Beautifully polished, finished in brilliant chrome and available in Tribal or Solid styles.
• Comfort: 8-½” x 3-½” surface area and vibration reducing anti-slip rubber pads provide comfort and foot support.
• Body Control: Additional body control is provided through the increased surface area, improving user confidence.
• Folding: Boards maintain the ability to fold away when making contact with the ground.
• Rub Strip: Replaceable Stainless Steel rub strips are inset and attached to the lower outside corner of the boards to provide protection to the board’s surface in deep cornering.

• Reposition floorboards, rear brake pedal and shift lever 3" further forward thank stock
• Kit includes all necessary mounting hardware and instructions.

This snazzy little cover slips right over the plain, round rubber shift peg found on several models of cruisers. This snazzy little cover slips right over the plain, round rubber shift peg found on several models of cruisers.

These highway pegs utilize Kuryakyn unique offset mount to allow riders a range of adjustment not possible with other clamp-on style highway pegs. The offset can be rotated in a 4 diameter circle to accommodate tall, short, or average height riders. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, look at our Right Angle Mounts. These highway pegs utilize Kuryakyn unique offset mount to allow riders a range of adjustment not possible with other clamp-on style highway pegs. The offset can be rotated in a 4 diameter circle to accommodate tall, short, or average height riders. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, look at our Right Angle Mounts.

• Yamaha engine guards are 1" diameter
• Baron's engine guards are 1.25" diamter
• Cobra's engine guards are 1.25", the Fattys are 1.5"
  

Chrome-plated foot pegs designed to replace stock passenger pegs. All hardware included for easy installation and perfect fit. (Sold in pairs).

Fits '96~'01 Royal Star Standard, '96~'97 Tour Classic, all V Star models, all Warriors, all Road Stars, and '08 Raider

Kuryakyn has added a flaming new style to our comfortable switchblade peg. The flip-out heel rest makes a huge difference on those long rides.

The Flaming Switchblade makes a great addition to our Flaming Pegs and ISO-Flame Grips. Note: Flip out arm is designed to be a heel rest.

Simple and stylish, add the sleek lines of the ISO-Sweptwing Peg to streamline your bike and get ready for flight. With traditional ISO design, these beauties reduce the vibration and add that super comfortable footpeg. Add them solo or coordinate them as a matched set to the Küryakyn Swing Wing Peg.

Set your bike apart from the crowd. A full custom footpeg at a realistic price. Bet you get a bunch of compliments on these and your feet will love them too. Will be available for any H-D and many metric cruiser applications. Coming in 2007.

• Put your passenger pegs anywhere you want them
• Offered in two lengths - 2" or 4"
• Both male end & clevis can be rotated 360º & lock securely when tightened
• Investment cast & chrome plated for strength & durability

Note: Stock footpegs do not work with this product. Requires Motorcycle specific Splined Adapters and Male Mount Pegs.

A pair of 3-piece Heavy Duty Steel Clamps with Chrome or Black Finish. While not offering any range of motion or adjustment like our other premium highway mounts, these are a good economical choice for highway peg mounting.They will accept most pegs. Sold in pairs only.

CLMP87: will work on most 7/8" (22.3mm) engine guard or round engine/down tubes.
CLMP1: will work on most 1" (25.4mm) engine guard or round engine/down tubes.
CLMP125: will work on most 1.25" (31.7mm) engine guard or round engine/down tubes.

Our high-quality peg and board sets fit with ANY highway mount. They may look a little like others... but take a closer look to see the big differences. All RIVCO Highway Mounts & Pegs are made from steel and aluminum and are supplied with stainless steel hardware - they won't slip or shift.

Pegs are triple chrome-plated and will work with all RIVCO mounts. They have 3/8” mounting bolts and can be used with most other brands of mounts. Includes our unique locking setscrew system that allows you to adjust the pegs to the desired angle.

PEGSHR: This set of pegs has an adjustable heel rest, both are 5" long. The pegs and heel rests can be set to any desired angle and locked securely in place. They will fit with all RIVCO highway mounts. Not recommended for use as rider pegs. Includes clevis and mounting bolts (not pictured).

Peg extensions for all Rivco pegs - adds 2" or 3" of width to each side. Triple chrome-plated. Mounts between the peg and the clevis "folding mechanism". Folds up with peg.

PEGSAC: These threaded adapters will allow you to use other brands of pegs that use 1/2"-13 mounting bolts with RIVCO highway mount sets that use 3/8" bolts.

PEGSAF: These threaded adapters will allow you to use other brands of pegs that use Harley's 1/2"-20 mounting bolts with RIVCO Highway Mount sets which use 3/8" bolts.

• High quality billet aluminum clamp-on foot pegs will fit any highway bar or fram with 1 1/4" o.d. tubing
• Sold in pairs