This exciting product is something we’re thrilled to be offering. Flexi Wire & Hose Cover makes customizing a bike so much easier than before. Offered in a variety of colors, you can detail all your hoses and cables easily and affordably. Each kit includes different diameters of covering, so you can cover all the lines/cables on your bike with just one kit.

• Use what the professionals use to cover cables, hoses and wires quickly and inexpensively
• Cover your wire harnesses, handlebar wiring, brake lines, throttle lines and fuel hose
• Expands easily to fit over ends for smooth installation and long lasting protection
• Chrome kit - the Dynamic chrome covering adds a bright, shiny appearance
• Fits snugly for a clean, custom look
• More than enough product to do your entire motorcycle
• Can be used to customize any motorcycle
• Kit includes: 6-ft of 1/2”, 20-ft of 3/8”, 8-ft of 1/4” diameter, expandable covering plus zip ties and black and clear shrink tubing. (chrome kit has chrome zip ties).

“The World’s Best 7-Color LED Tachometer”

• Fits all H-D, American or Metric V-twins
• Accurate 0-8000 RPM data every biker needs
• Beautifully chromed sleek bullet-shaped housing
• 7-color LED illuminated face for extra attitude - also available in black or white face
• Integrated bar clamp allows nearly limitless mounting on 1” handlebars
• Black and white face are backlit and are also available for 1 1/4" and 1 1/2" handlebars
• Easy install – includes complete hardware kit
• Easy to follow instructions
• Extra long wire leads
• Includes Tach Adapter for single-fire ignition
• Fits most 2 or 4 cylinder motorcycles
• 2-7/8” D x 3-1/2” L compact housing
• Weather resistant for long life
• Great function – Stylish looks – Awesome value!

When riding though dusty roads or in the rain you want to protect your BAK with this handy Raincoat. The Raincoats are pretreated silicon polyester wraps. This material contains uniform micron sized openings that allow air in yet deflects any water splashed upon the air filter. Recent Dyno and flow bench testing has shown no significant loss of horsepower with the Raincoats. Baron's BAK filters are water resistant, but extended riding in rain is not recommended.

Note: Will also work on any filter kit that uses a K&N E-3333 (2" wide teardrop) filter (used for BAKs). (Does NOT fit K&N Billet Filter Kits)

Bikes with forward controls generally don’t have a way to actuate their rear brake light. This banjo switch can be installed in the rear caliper or at the master cylinder. Works off hydraulic pressure to actuate brake light. Easy install.

Bullet ends give your Küryakyn ISO™-Grips a finished aggressive look. Their added weight helps to reduce handlebar vibration for a more comfortable ride. Very Quick and E-Z install.

Beautiful, dynamic and comfortable? Yes in fact they are. These specially designed grips are contoured to fit a riders hand which eliminate the need to squeeze them with the force most billet grips require. The decorative flame milled design flows gracefully across the surface and the interlocking flames seem to flicker in the sunlight.

Fits all Honda 1" handlebars.

Fitment (known to fit the following models)
  Honda: Magna, Shadow Ace/Areo/Sabre/Spirit, VLX, VTX1300, VXT1800

Beautiful, dynamic and comfortable? Yes in fact they are. These specially designed grips are contoured to fit a riders hand which eliminates the need to squeeze them with the force most billet grips require. The decorative "X" (or diamond) milling design interlocks and creates a dynamic brilliance to the chrome.

Works with stock throttle lines on all Honda and Suzuki models with 1" handlebars.

Fitment (verified on following models)
Honda: Fury, Ace/Aero/Spirit/Sabre, VTX1300, VTX1800, Magna, VLX
Suzuki: Intruder 800/S50, Intruder 1400/S83

Beautiful, dynamic and comfortable? Yes in fact they are. These specially designed grips are contoured to fit a riders hand which eliminate the need to squeeze them with the force most billet grips require. The decorative flame milled design flows gracefully across the surface and the interlocking flames seem to flicker in the sunlight.

Fits all Yamaha/Suzuki/Kawasaki 1" handlebars.

Fitment (known to fit the following models)
Yamaha: Raider, Road Star, Royal Star, V-Star 1100 Classic/Custom, V-Star 650 Classic/Custom, Venture, Warrior
Kawasaki: 1500/1600 Classic, 1500 Drifter, Mean Streak, 1500 Nomad, Vulcan 2000/800/900
Suzuki: Intruder LC 1500/C90, Marauder 1600/M95, Volusia/C50, M109R

Designed to provide comfort and great style, our massive 1-1/4" rigid, sculpted tubing provides instant relief to necks, shoulders and backs. Riders around the world say these bars make it feel like they've added power steering to their bikes! The added diameter and thickness of the tubing reduces vibration that causes arm fatigue, while at the same time providing a complementary size befitting your cruiser's large styling.

Works with stock control lines on most bikes (some bikes may require rerouting of the control lines or the addition of +2" cables). Fits motorcycles with riser spacing of 3-1/2" to 4". Works well with most stock and aftermarket risers. Each handlebar is bored and dimpled to allow for internal wiring.

Dimensions: Diameter: 1-1/4", Width: 38, Rise: 5", Pullback: 13"

Kong Bar provides the bad-boy image and "old school biker" attitude but with a twist. Baron's specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control. You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control. The massive 1-1/4” tubing and the classic bad-boy biker look of these bars truly makes you a standout in the crowd.

Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s cruisers and as the best possible fit for most riders.

Each handlebar is bored and dimpled to allow for internal wiring. Requires longer control cables, but accepts all stock 1" type controls. Fits bikes with riser spacing of 3-1/2" to 4". Works with most stock and aftermarket risers. It is recommended that you check your local codes for handlebar height to be sure these bars are legal in your area.

Dimensions: Diameter: 1-1/4", Width: 37", Rise: 17", Pullback: 12", Center Width: 10"

Known Bike Fitment: (Honda & Suzuki models require minor drilling)

• Honda: Magna, Shadow Ace/Sabre/Spirit
• Kawasaki: Mean Streak, 1500 Drifter, 1500 Nomad, Vulcan 1600 Classic, Vulcan 2000, Vulcan 90
• Suzuki: Intruder 1400/S83, 800/S50, Volusia/C50, 1500LC/C90, Marauder 1600/M95
• Yamaha: Road Star 1600/1700, Royal Star 96-01, V-Star 1100 Custom/Classic, V-Star 650 Custom/Classic

Kickback Risers provides immediate relief to those stretching to reach their handlebars. Our 4" risers provide approximately 1-1/2” of pullback. This repositioning of the rider's grip point reduces the stress and pain most riders feel in their neck, back and shoulders. Also, by relocating the bars closer to the rider the motorcycle becomes much easier to steer and control.

Each riser has its own individual stylish cap with mounting hardware, which lightens the look of the front end and allows mounting of a tachometer or other accessory.

Installs on most bikes with a 1" handlebar clamping area and works with most stock control lines and cables with simple re-routing on most models. 1/2" diameter mount bolts allow these risers to mount in most triple trees

Fitment: (most bikes with 1" handlebars - known to work on following models)
   HD: Dyna, Softail, Sportster
   Honda: VTX 1300R (05+)
   Kawasaki: Vulcan 900 Custom/Classic
   Suzuki: Volusia/C50, 1500LC/C90
   Yamaha: Road Star 1600/1700, V-Star 1100 Classic/Custom, V-Star 650 Classic/Custon, Warrior

• Sleek beautifully chromed housing
• Accurate 0-8000 RPM data every biker needs
• Mounts easily in multiple locations and positions
• Super bright LED illumination for night riding
• Choice of black or white face
• Available for 1" handlebars
• Compact 40mm D x 3-1/2” L housing
• Hardware and EZ-follow instructions included
• Includes Tach Adapter for single-fire ignition
• Fits most 2 or 4 cylinder motorcycles

Important Note: Single-fire ignitions will require the installation of an adapter (included with each tach).

• Billet aluminum housing with removable bezel
• Housing specifically accepts stainless steel electronic tachometers or speedometers with body dimensions of 2.4” (61mm) diameter and a depth of 2.3” (59mm), along with bezel diameters of 2.64” (67mm)
• Integral mount for 1” or 1-1/4” handlebars available - See related products below for 1" clamp Gauge Housing (BA-7575-00)
• Housings can be mounted in multiple positions and locations
• Wires exit at the rear of the housing and a rubber wiring grommet is included
• Installation is easy and instructions are included
• Does not work with gear driven gauges

These polished stainless steel brackets allow you to add custom marker lights to your bike quickly and easily. Accepts most aftermarket marker lights.

Available in 90-degree bend, flat or 67-degree bend. Each set includes two mount tabs. 90-degree bend is commonly used for front mounts, and flat for rear.

67-degree bend set:
   Yamaha fitment: Install in existing fender holes to either side of your stock brake light. Works very well with our Laydown License Kit (BA-3105U).
    Kawasaki fitment: These allow you to add custom marker lights to the front of your Mean Streak quickly and easily.

The coolest pipe tips you’ve ever seen. Several special cuts were designed, giving our jewels a style all their own. These tips can be rotated into almost limitless positions. They are sold individually so you can mix and match them to create a unique look for your motorcycle. Available for Baron Nasty Boys & HD pipes.

Baron Family Jewel Exhaust Tips will work with exhaust systems of 2-1/4" OD and with an ID of 2.06"-2.16", and having at least 1" clear end space on the ID of the pipe for tip insertion.

Fits:
- Baron's pipes - Nasty Boys, Too Nasty, Wicked Curve, Stacked DD and Curved DD
- Other exhaust systems with 2 1/4" OD, ID of 2.06"-2.16" and min of 1" clear end space on the ID for tip insertion

Note: Family Jewel tips are sold each.

This exciting product is something we’re thrilled to be offering. Flexi Wire & Hose Cover makes customizing a bike so much easier than before. Offered in a variety of colors, you can detail all your hoses and cables easily and affordably. Each kit includes different diameters of covering, so you can cover all the lines/cables on your bike with just one kit.

• Use what the professionals use to cover cables, hoses and wires quickly and inexpensively
• Cover your wire harnesses, handlebar wiring, brake lines, throttle lines and fuel hose
• Expands easily to fit over ends for smooth installation and long lasting protection
• Chrome kit - the Dynamic chrome covering adds a bright, shiny appearance
• Fits snugly for a clean, custom look
• More than enough product to do your entire motorcycle
• Can be used to customize any motorcycle
• Kit includes: 6-ft of 1/2”, 20-ft of 3/8”, 8-ft of 1/4” diameter, expandable covering plus zip ties and black and clear shrink tubing. (chrome kit has chrome zip ties).