Performance pipes with a twist, the Jug Hugger exhaust systems for the Harley Davidson Dyna models.

• Jug Huggers have the right mix of air flow and back pressure to provide increased performance and incredible sound.

• The oversized removable heat shields give the Jug Huggers a 2 1/2 inch fat look.

• Max-Flow performance baffles and chrome billet aluminum end caps are standard.

• Optional sound reducing baffles, or torque chambers give you the option of getting the right performance from your motorcycle.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

In the tradition of Harley Davidson XR dirt track motorcycles, BUB has created a dirt track style 2-2 exhaust for XR 1200 models. This system uses a unique stepped header routing that blends into tapered high mounted megaphones featuring billet end caps.

BUB XR 1200 2-2 Applications: 08-09 Harley Davidson XR 1200 Models (requires relocation of the rear master cylinder and brake fluid reservoir. See Storz Performance www.storzperf.com. The use of a fuel management system is needed for proper performance and operation).

The BUB XR 1200 2-2 is a high pipe dirt track inspired exhaust system. The rear exhaust pipe runs forward to meet up with the front pipe to help optimize the lengths for performance. The pipes run into megaphone mufflers that feature billet end caps for a very high quality finish. The exhaust systems are available in finishes of either all chrome or black ceramic with chrome end caps. The pipes are covered by heat shields that help maintain the exceptional finish for years to come.

For those looking for a true dirt track experience for your ride, the BUB XR 1200 2-2 system is a must. From the first moment you hear these pipes, you will be hooked and from the first ride you will be addicted!

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

.

The BUB Sidecutter 2-2’s offer an aggressive look and sound at an affordable price with all the quality you would expect for a BUB product. Large diameter shields and the parallel routing give a “fat” appearance that looks fast even when standing still.

BUB Sidecutter 2-2 systems are offered in flush and stagger cut versions either in chrome or black ceramic finishes. The Side Cutters have a slash cut end treatment and have removable baffles. The stepped performance headers have full coverage heat shields to maintain the exceptional finish.

The sound, performance, and looks found with the BUB Sidecutter 2-2’s will not disappoint. All of this is at a price that everyone can afford.

All BUB 7 systems are built to BUB’s highest quality and performance standards.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

BUB Lakester 2-into-2 systems optimize torque and power by combining header, muffler and baffle exhaust flow dynamics. This type of tuning technology gives the BUB Lakester Systems astounding performance which means broader torque curves and higher top end horsepower for all model applications. Softail and Dyna models have 1 ¾ inch diameter headers with 2 ¼ inch heat shields that merge into 2 ¼ inch diameter mufflers with 2 ½ inch heat shields. Mufflers and headers are welded together to form an integral-one piece assembly. BUB Lakesters set a new mark for style and performance on Harley Davidson and big twin motorcycles. BUB Lakester systems for Sportster models accomplish the same type of performance, style and quality of sound by using 1 ¾ inch headers with 2 inch heat shields – 2 inch mufflers with 1 ¾ inch baffles as well as 2 ¼ inch heat shields.

BUB Lakester 2 into 2 systems come standard with full length-two piece heat shields that have 220 degree coverage around the header and muffler sections.

Header heat shields are 2 ¼ inch diameter and blend into 2 ½ inch diameter muffler heat shields. Dual O2 sensor ports.

Full length linear heat shield coverage means no unsightly bluing or yellowing of the header pipes or mufflers.

Lakester Systems are also fitted with chrome plated billet aluminum end caps.

Adding further to the style, a BUB Lakester logo is precision die stamped in the upper portion of the rear header heat shield on all systems.

BUB Lakesters come in a brilliant triple chrome finish or with sinister black ceramic coating. All Lakesters are available in “Long” and “Mid” lengths, with “Flush Cut” and "Staggered Cut" styles. Long length systems end at the center of the rear axle and Mid Length systems end approximately six inches forward of the rear axle. Each muffler section measures 20 inches in length and is fitted with a 2 inch diameter Dyno proven louvered baffle. 

BUB Lakester 2-into-2 systems come with detailed installation instructions and all necessary mounting hardware and brackets. BUB Lakesters are designed to perform on most engine configurations up to 113 cubic inches. BUB Lakester Accessories Interchangeable End Caps For those who want the option of a different look,

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

.

The Lakester 2 into 1 systems are available in Black or Chrome finishes.

• All BUB 7 systems are built to BUB’s highest quality and performance standards.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

.

• Scalloped cut mufflers give a look that will work with classic or modern motorcycle styling.

• The exceptional chrome finish is complemented by the subtle laser engraved BUB logo.

• Removable baffles can be replaced with an optional sound reducing baffle.

• Deep aggressive tone and performance that matches more expensive slip-ons.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

• One-piece muffler housings with tapered inlets for easy installation.

• The mufflers have 3 1/4" muffler bodies with slash-cut aluminum end caps fixed in slash-out position.

• These slip-on mufflers offer impressive mid-range and top end performance.

• Produces a deep aggressive sound.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

This system features:

• Miter-cut stepped headers run from 1.75 inches to 1.875 inches that merge into a 2.50 inch collector.

• The headers are covered by 2.25 inch heat shields with the BUB 7 logo precisely die-stamped into the rear heat shield.

• The muffler starts at 2.50 inches and ends at a fat 4 inches with a slash-cut aluminum end cap.

• Mufflers finish with slash-cut billet aluminum end caps; slash-cut can be positioned at side-exit, downward or any position in-between by loosening two bolts on the adjustable mounting brackets.

• The muffler utilizes reverse cone tuning technology for exceptional mid-range and top-end performance.

• Emits a deep, aggressive tone without objectionable noise.

• The system comes with dual 02 sensor ports.

• All BUB 7 systems are built to BUB’s highest quality and performance standards.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

.

Features:
• 1 3/4" headers covered by 2", 220 degree full coverage heat shields.

• BUB 7 logo is precisely die-stamped into rear heat shield.

• Reverse cone shaped mufflers transition from 1 3/4" to 3 1/4" and utilize reverse cone tuning technology for exceptional mid-range and top-end performance.

• Mufflers finish with slash-cut billet aluminum end caps; slash-cut can be positioned at side-exit, downward or any position in-between by loosening two bolts on the adjustable mounting brackets.

• Dual 02 sensor ports come standard

• All BUB 7 systems are built to BUB’s highest quality and performance standards.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

 

.

These 1-1/2" baffles will reduce the overall sound level by 4 to 6 decibel points and create increased back pressure resulting in improved torque and low end performance.

These baffles are NOT for V-Rod Jug Huggers.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

BUB "7" Sound Reducing Baffles for Softail, Dyna and Sportster 2 into 2 Systems (Will Not Fit V Rod)
These baffles will reduce the sound level around 6 decibels.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

Kit for blocking off the O2 sensor ports on HD exhaust systems - will NOT work on metric models.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

Need to tone it down a bit?  These baffles are made for Rinehart, Stubbies and Chambermaid pipes by Bub

Replacement springs for Heat Shields - pack of 8