If you liked our chrome ISO-Grips then you’ll love our new Black ISO-Grips. These powder-coated black grips dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort. Get total comfort with our matching throttle bosses. These grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO� pads permit air movement for added comfort in hot weather. The knurled accent ring adds a touch of class. All grips are sold in pairs. Add the ISO Throttle BOSS for more comfort! Accent rings are available in several colors to match your bike paint theme. The removable end caps allow access to handlebar air reservoir fittings.

6320 will fit all Harley-Davidson (H-D) models with dual cable throttle control.
6321 is for models with electronic throttle control (TBW) 2008+ Electra Glide, Road King, Road Glide, Street Glide and Trikes

As your taillight fades into the darkness, the sinister impression of the Zombie is all that will remain. A new addition to our popular collection, this taillight cover reinforces the image of your evil ride. All hardware is included for easy installation. 

Fitment: ’73-’11 H-D Models without bobbed rear fenders -
    EXCEPT: ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’10 FLSTN, ’00-’07 FXSTD, ’02+ V-Rod, ‘07+ XL1200N, ‘09+ XL88N,
                 ’08+ Rocker, ’09+ FXDB, ‘10+ FXDWG, ’10+ FLHX/FLTRX, '09 FLTRSE, '10+ FLSTSE, '10+ FLHXSE

It's time to finish the job with our Chrome Throttle and Idle Cable Covers.  Quick and easy installation - Requires no disassembly of your controls or cables.

Fitment: All '82+ Models with 90 Degree Cable Elbows

As tasteful as an Oscar, this beautifully sculpted set of levers adds a really unique accent to any bike. They are also very comfortable on the hands.

1024 Fits: '82-'95 H-D Models

1019 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1049 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra/Road/Street Glides, Trikes, & Road Kings)
When 1049 is installed on an '08 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1055 Fits: '08+ Electra Glide, Road Glide, Street Glide, Dressers, Trikes, & Road Kings with Cable Operated Clutch

Brake away from the ordinary and clutch the gaze of onlookers with Küryakyn's new Zombie™ Levers. Comfortable contours and a dished back allow high leverage with minimal reach; a gripping addition to this popular collection. Sold in pairs.

1047 Fits: '96+ H-D Models with Cable Operated Clutch, (except '04+ Sportsters & '08+ Electra/Road/Street Glides, Trikes & Road Kings)
When 1047 is installed on a '08+ Softail or Dyna the brake lever will be positioned approximately 3/8" further from the bar than the stock lever.

1060 Fits: '04+ Sportsters

Kuryakyns's new ISO�-Flame Grips have a unique flamed pattern in the soft and cushy rubber pads. Finished off with a Maltese Cross emblazoned end cap and trim ring for that additional bad attitude look. This grip accepts the wildly popular ISO-Throttle boss, which greatly aids your hand on those long rides to the next rally. Sold in Pairs

Fitment:
6269 fits: 08+HD models with electronic throttle control (Glides, Road King, Trikes)
6260 fits: "82+ HD models with dual cable throttle

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

The look is purely wicked, but they look & feel is so cool! Smooth chrome bodies with vibration absorbing rubber inserts assure a comfortable & secure grip to keep control in hand. Zombie end caps enhance the specter of evil as the numbers of this coven of accessories continue to multiply. Zombie Throttle Boss included or sold separately - fits right side only.

Enjoy those longer rides & relax your throttle hand with the Mechanical Throttle Assist. This is the simplest & cleanest looking throttle position holder available. Attaching to the end of your handlebars, this beauty looks like a bar end weight. Simply hold the throttle at desired location & roll your little finger back to hold your throttle in position. The spring loaded tensioner makes it easy to set without over tightening for easy throttle shut down when needed. Add the left side for a bar end weight matched pair & ride on in comfort.

For OEM Grips & All ISO®-Grips & ISO®-Flame Grips with 7/8" or 1" handlebars. All H-D Models with 1" or 7/8" handlebars with hollow bar ends & OEM or Küryakyn ISO- & Transformer style grips (except '08-'09 Touring Models with electronic throttle, heated grips or air reservoirs in handlebars). NOT compatible with Kuryakyn Chrome style throttle bosses that screw to the end of Kuryakyn grips or other grip end accessories/weights. Note: Proper installation may require cutting or drilling a 5/8" hole in the end of the OEM grips.

Fitment:
6285 and 6288 -
      Honda: VTX1300/1800, VT1300 Custom Line (Sabre, Stateline, Interstate), VT 750/1100, VLX, Magna, Valkyrie and ST100/1300
      Kawasaki: Vulcan 900, 1600 Classic & Mean Streak. Following can not use 6288 - Vulcan 800/1500 Classic/Drifter/Nomad/Mean Streak, Nomad 1600
      Suzuki: Intruder 1500LC/C90, Volusia/C50, Marauder 800/M50, S50, Intruder 1400/S83
      Yamaha: V-Star 650 Custom & Classic
      Victory: All Kingpin, Hammer and Vegas (all models) with Kuryakyn Grips
      Universal: all models with 7/8" or 1" hollow bars with open ends (ID 5/8" or greater)

Boss Blades are a stunning addition to our line of custom levers. Their wide, deeply dished blades greet your fingers with the shortest reach possible while still allowing the necessary range of motion. Their sculpted surfaces and chiseled ends scream Who’s Boss.

The 1080 (adjustable) relocates the cable anchor point to allow the lever to be adjusted closer to the handlebar (up to 3.4" at the tip) without affecting clutch actuation.

1036 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1038 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)
When 1038 is installed on an '08-'09 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1057 Fits: '08+ Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

1080 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)

Note: Installer is responsible for ensuring proper clutch disengagement when levers are installed. Clutch and clutch cable must be correctly adjusted and installer must verify grip diameter does not adversely affect clutch operation.

Fitment:
6229 fits: 08+HD models with electronic throttle control (Glides, Road King, Trikes)
6203 fits: "82+ HD models with dual cable throttle

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

These are the finest levers on the market today. You see, your forefinger is your strongest finger. But, other levers won't let your strongest fingers work. Kuryakyn levers allow the forefinger to get a real grip, making it much more comfortable and easier to pull the lever. Add to that the dished out backside of the levers, which Barnett invented twenty-some years ago, and you've got the best set of levers you'll ever own. Your hands just fall naturally into place. If you've got small hands, these are a must.

1021 Fits: '82-'95 H-D Models

1029 Fits: ’96-’11 H-D Models with Cable Operated Clutch (except ’04-’11 Sportsters & ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes)
When 1029 is installed on an '08+ Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1056 Fits: ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

It's hard to imagine any piece of cool metal feeling better in your hand. Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.

6291 Fits: '82+ H-D Models with dual cable throttle control

6293 Fits: '08+ H-D Models with electronic throttle control (Electra Glides, Road Kings, Road Glides, Street Glides, Trikes)

Capable of supporting engine builds that produce up to 120 H.P.

The body is 1/2" wider than a standard Hypercharger.  "Pro" embossed bearing cups give this performance weapon a look that screams horsepower!

The Pro-Series Hypercharger fits Stock or 44mm C.V. style carbs, and can be easily adapted to Mikuni HSR42/45/48 and S&S Shortys. 

Pro-Series Hyperchargers come complete with mounting hardware and crankcase breather kits.

We tested many of our competitor's forward facing air cleaners & found them to be very restrictive. We designed many prototypes until we settled on this very aggressive, free flowing, trulyhigh-performance unit.The chrome-plated,die-cast housing with high-flow element, supplied by Advanced Flow Engineering (aFe), is easy to install & air-flow will support performance engines in excess of 100 H.P.

Note: These kits contain an all-chrome Corsair Air Cleaner, mounting kit & Jets (if needed) necessary for a complete, sanitary installation. For optimum performance & driveability on fuel injected motorcycles, we strongly recommend use of a Fuel Injection Controller like Fi2000, Wild Fire, Dynatek, etc. We recommend that the air cleaner installation & jet/FI adjustments be performed by a qualified technician.

Note: Not compatible with fairing lowers equipped with glove boxes.
Note: Installation of this air cleaner may decrease rider leg room. Please reference dimensions provided and determine if installation will adversely affect safe and comfortable operation of the motorcycle before making your purchase. This is especially important for riders with shorter legs.

Easily affixes to the speedometer. Besides the sleek appearance, you'll really appreciate the reduction in glare if you run a windshield!

Fitment:
   4015:
       H-D:  Fits perfectly on Road Glides, ‘04-’10 Sportster Customs, & many other bikes
   Metric:
       Honda: '02-'06 VTX1800C, 250 Rebel,  Shadow 1100 with Round Speedo on handlebars measuring 3-3/4"
     Victory: All '04-'11 Models (Jackpot, Kingpin, Vegas, Hammer) with digital gauge (except Vision)
   Universal: Speedometers & tachometers 3-3/4" diameter with 7/16" of exposed bezel/sidewall

   4016 Fits: Speedometers & tachometers 3-1/4" diameter with 1/8" of exposed bezel/sidewall

This slip-on chrome accent is a great way to finish unsightly transitions. Just slip it into place & tighten the set screw - it's that easy!

Fitment:
H-D: Clutch Cables on '87-'99 Big Twin & '91-'06 Sportsters
Metric: V Star 650 Models

Stylize those unsightly front and rear reflectors on your bike with our louvered chrome covers. Leaves them on your bike for heightened visibility but adds a stylized louvered cover in traditional Kuryakyn shiny chrome.

Fits: Front, All VTX 1800, All 1100 Spirit (front and rear), all 750 Spirit, all Shadow VLX 600, VT1300 Custom Line, Front Downtubes: All ’92-’08 H-D Touring Models (Electra Glides, Road Kings, etc.), all ’91-’99 Softail Models, & all ’91-’99 Sportster Models and other motorcycles with reflectors that are 3-5/16" by 1-1/4" or smaller with 1/4" of clearance around the reflector.

This footpeg mount allows one to fine tune their riding position. Measuring 4-1/2” long with a 1-1/4” offset, the rider may now increase or decrease the reach to the highway peg. The X-Tension mounts with a 1/2”-13 bolt & may be used on OEM highway peg mounts, some forward control plates, with Magnum Quick Clamps, etc. It will accept any H-D style male mount footpeg.

4501 Fits:
H-D: X-Tension with Dually & 1-1/4" Magnum QuickClamp (pr)
Metric: All ‘99+ RoadStar 1600/1700, ‘02-’09 Warrior, ‘99-’09 V-Star 1100, '09+ V-Star 950, All V-Star 650, ‘08+ Raider (Requires 1-1/4” of available round space on both front frame tubes)

4515 Fits:
H-D: Mount with a 1/2"-13 bolt and may be used with OEM highway peg mounts, some forward control plates or with Magnum Quick Clamps.
Metric: Yamaha V-Star 1100/650, Road Star with 1-1/4" clamps or with Magnum Quick Clamps.

Note: Requires Male Mount Pegs. Not suggested for use with full size engine guards.

Lighted Curved Laydown License Plate with Accent Taillights leaves no chance for mistaken idenity! With its gentle curved contour & snug, fender hugging mount, this new license plate frame has a distinctive look all its own. For even more sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes. White L.E.D's provide additional plate illumination at night. A perfect complement to Panacea Taillights & Run, Turn, or Brake Controllers, this plate ties right in for all 3 functions. Designed to fit 4"x7" plates.

Fitment:
   Metric: '03-'09 VTX1300 Retro/S/T or '02-'08 VTX1800 Retro/S/T Models & Universal Lay Down Applications (may require drilling holes in fender for models not listed)
   Any H-D Model with standard 3-bolt fender mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

Even the Moonshiners would be jealous of this brackrest with hidden fold-down luggage rack. The sweeping oval bars with matching contoured pad flows with the lines of your bike. Literally fold down the inconspicuous luggage rack right out of the backrest when needed, & hide it away securely with the integrated thumb nut when you don't. Your passenger is happy, you can always bring your things, & your bike looks awesome. Mounts directly to the required Küryakyn Quick Detach Side Straps & you'll have everything you need. This is a must have. Kuryakyn Motorcycle Specific Quick Release Side Plates for Transformer Backrest must be used. They are compatible with H-D Detachable Docking Kits if the bike is so equipped.

Note: Backrest, quick release side plates and attachments kits are sold separately. You will need one of each!

Fitment notes:

Sportster note - if you have H-D Hard Saddlebags, you need hardware kit 91405-04 from your dealer
1636 is compatible with H-D Docking Kit  53803-06
1638 is compatible with H-D Docking Kit  53544-04 or 53529-04

Fitment: 
- Kuryakyn 5011
- HD: 00+ H-D models with Buillet Turn Signals

We can give you the extra light you want with our straight forward plug-in L.E.D. Taillight & Turn Signal Conversions. The L.E.D. Circuit Boards are mounted inside our Stylized Lenses so all you do is take off your stock lens , remove the bulb, plug our connector into the socket & install our Lens .FMVSS #108 Compliant

Fitment:
5442 and 5443 fit Kuryakyn part numbers: 5001, 5009 and 5011)
5446 and 5447 fit Kuryakyn part numbers: 9197 and 5032)
’05+ FLSTN, ’08+ FLSTSB, ’02+ FLSTF, '10-+ FLSTFB, ’06 FLST, ’05-’07 FLSTSC, ’02-’03 FLSTS, ’05-’06 FLSTFSE, '10+ FLSTSE,
’00-’07 FXSTD, ’02-’08 FXST, ’02-’09 FXSTB, ’02-’06 FXSTS, ’07-+ FXSTC, '08+ FXCW/C, ’07-’09 FXSTSSE, ’03-’04 FXSTDSE,
’06+ FLHX, ’04-’09 FLTR, '10+ FLTRX, '11+ FLTRU, ’04-’07 FLHRS, ’09+ FLHTCUTG, '10+ FLHXXX, ’09 FLTRSE, '10+ FLHXSE, ’06+ FLHTCUSE, '11+ FLTRUSE, ’04-’05 FLHTCSE, ’02-’03 & ’07-’08 FLHRSE,
’01 FXDX/T & All ’02+ Dyna Models,
 All ’02+ XL

Boss Blades are a stunning addition to our line of custom levers. Their wide, deeply dished blades greet your fingers with the shortest reach possible while still allowing the necessary range of motion. Their sculpted surfaces and chiseled ends scream Who’s Boss.

The 1080 (adjustable) relocates the cable anchor point to allow the lever to be adjusted closer to the handlebar (up to 3.4" at the tip) without affecting clutch actuation.

1036 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1038 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)
When 1038 is installed on an '08-'09 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1057 Fits: '08+ Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

1080 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)

Note: Installer is responsible for ensuring proper clutch disengagement when levers are installed. Clutch and clutch cable must be correctly adjusted and installer must verify grip diameter does not adversely affect clutch operation.

Side Mount License Plate mounting clamps are sold separately & allow the license holder to be installed on the swingarm of Dynas, Sportsters, Softails, & Rockers!

Please check local laws regarding side mount license plates before ordering.

Fitment:
6229 fits: 08+HD models with electronic throttle control (Glides, Road King, Trikes)
6203 fits: "82+ HD models with dual cable throttle

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

A perfect match to our Flush Mount Gas Cap, The Informer's sleek, low profile design incorporates both an L.E.D. fuel gauge and an L.E.D. battery gauge. A daylight sensor automatically adjusts the brightness of the L.E.D.'s. The fuel gauge has a string of color coded L.E.D.'s to indicate fuel level. When full, a single green L.E.D. will be illuminated at the right end of the string. When the tank is virtually empty, a single red L.E.D. will flash at the left end of the string. Red L.E.D.'s appear from empty to 1/8 tank, amber L.E.D.'s appear from 1/4 to 1/2 tank, and green L.E.D.'s appear from 5/8 to full.

New for 2008, our Patent Pending design allows the rider to select the fuel level at which the red "empty" L.E.D. illuminates. The stock float and sending unit are notoriously inconsistent and often contribute to inaccurate readings at the gauge. Want the gauge to read empty when the bike is on fumes? No problem. Want the gauge to read empty when there is still a gallon left in the tank? No problem, the choice is up to you.

The Battery Gauge is an array of L.E.D.'s that indicate the operating voltage of the bike's electrical system. Green L.E.D.'s represent the normal, safe operating range of your charging system, 12.5v to 14.5v. Amber L.E.D.'s warn the rider that the bike is not charging. If the reading drops below 10v or exceeds 15v, a flashing red L.E.D. will alert the rider.

Note: Fits all H-D models with fuel gauge mounted in left fuel tank.

 

As your taillight fades into the darkness, the sinister impression of the Zombie is all that will remain. A new addition to our popular collection, this taillight cover reinforces the image of your evil ride. All hardware is included for easy installation. 

Fitment: ’73-’11 H-D Models without bobbed rear fenders -
    EXCEPT: ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’10 FLSTN, ’00-’07 FXSTD, ’02+ V-Rod, ‘07+ XL1200N, ‘09+ XL88N,
                 ’08+ Rocker, ’09+ FXDB, ‘10+ FXDWG, ’10+ FLHX/FLTRX, '09 FLTRSE, '10+ FLSTSE, '10+ FLHXSE

An inexpensive, fast, & easy way to completely finish chroming most 96-09 hand controls!  The Clutch Perch is a complete chrome replacement unit that has been beefed up to complement the brawny look of a H-D. The Master Cylinder Cover dresses up the reservoir & covers the entire visible hand brake bracket assembly with a lush layer of glistening chrome. There are even replacement chrome clamp halves & hardware accents for a 100% detailed, pure custom look.

9126 - Fitment: Single Disc '96+ Softails & Dynas, '96-'03 Sportsters (set)

9119 - Fitment: Dual Disc '96-'07 Electra/Road/Street/Tour Glides & Road Kings, '96+ Dynas, '96-'03 Sportsters (set)

1740 - Fitment: ’08-’10 Electra Glides, Road Glides, Street Glides, & Road Kings (set)

1741 - Fitment: '04+ Sportster

This side-mount license holder with light creates a show bike look & adds visibility with a red L.E.D. run & brake light complete with license plate illumination. It's smooth design shows no visible fasteners around the plate. Removable inserts allow it to accommodate both small (4" x 7") & large(4-3/8" x 8") plates.

Note: Softail applications are compatible with or without our Swingarm Covers.

Note: Please check local laws regarding side mount license plates before ordering.

Our streamlined Curved Laydown License Plate Mount is a major improvement over the stock "billboard" plate mount on many bikes today. The curved frame mates cleanly with the backing plate for a finished and completely custom look. Accents 4"x 7" plates.

Fits: H-D: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
Metric: '03+ VTX1300 Retro/S/T or '02-'08 VTX1800 Retro/S/T Models
Universal: universal - may require drilling holes in fender

Hi-Flow Air Cleaner Backplate

You can get a power advantage over your riding buddies without revealing your secret weapon since the stock air cleaner cover is retained! 

• Best Performance at the Best Price
• 40% More Breathing Capability Than Kits Without "End Breathing" Technology of Küryakyn's Exclusive Filter by K&N
• No Restrictive Paper Elements Here
• Includes Everything You Need for a Quick & Easy Performance Upgrade - Retains Stock Outer Cover

You've decked our your Bagger with enough chrome to blind a guy with welding glasses, now it's time to do something about that stock, utilitarian windshield. This windshield is manufactured from premium quality, optically clear, hard-coated polycarbonate. Unlike acrylic, polycarbonate will not crack or shatter upon impact.

Available in light or dark smoke tint and in 4", 6" and 8" heights.

Fits:
HD:  '96-'10 Electra Glides & Street Glides, & Trikes
Küryakyn Airmaster Fairing & Sportech Detachable Fairing Plus

Designed specifically for Sportster, Dyna, & FXR Models with 39mm Narrow Glide front forks. Non-marring, chrome-plated, die-cast clamps attach to the forks. Their smooth design & beautiful chrome finish looks great with or without the windshield installed.

Quite Simply The Best Windshield You Can Buy For The Money - The Bar Has Been Raised!

• Mounting Kit (required) and windshield are sold separately
• Premium .125" Optical Grade, Hard-Coated Polycarbonate
• All windshields include Zombie & Grooved interchangeable emblems
• Unsurpassed style - Unlike flat, plain-looking outer cross & vertical hardware, our stainless steel outer hardware is beautifully stamped & chrome-plated for a rich, classy appearance
• Three heights; Low, Mid, Tall - Choose the look & level of wind protection that's right for you (mounting kit sold separately)

Stock gas caps do a good job of keeping gas in the tank, but as far as style goes, they look like refugees from Grandpa’s Buick.

These slick Flush Mount Gas Caps have the high-tech look of aviation-style fuel fillers. The built-in trim ring protects the painted surface around the filler opening from dings & gas stains. A keyed entry system permits their ultra thin profile & prevents tampering. No cutting required. US Patent D400,838

Fits: All H-D screw type tanks from 1982+

These are the finest levers on the market today. You see, your forefinger is your strongest finger. But, other levers won't let your strongest fingers work. Kuryakyn levers allow the forefinger to get a real grip, making it much more comfortable and easier to pull the lever. Add to that the dished out backside of the levers, which Barnett invented twenty-some years ago, and you've got the best set of levers you'll ever own. Your hands just fall naturally into place. If you've got small hands, these are a must.

1021 Fits: '82-'95 H-D Models

1029 Fits: ’96-’11 H-D Models with Cable Operated Clutch (except ’04-’11 Sportsters & ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes)
When 1029 is installed on an '08+ Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1056 Fits: ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

As tasteful as an Oscar, this beautifully sculpted set of levers adds a really unique accent to any bike. They are also very comfortable on the hands.

1024 Fits: '82-'95 H-D Models

1019 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1049 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra/Road/Street Glides, Trikes, & Road Kings)
When 1049 is installed on an '08 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1055 Fits: '08+ Electra Glide, Road Glide, Street Glide, Dressers, Trikes, & Road Kings with Cable Operated Clutch

Our choke knob cover installs neatly over the stock black plastic unit. Not only does it look 100% better, it’s easier to find & get a hold of!

Fitment -
H-D: All '88-'06 XL Models & '90-'06 Big Twin with stock carburetors
Honda: All VTX1300, '04-'09 Shadow 750 Aero/Spirit C2
Kawasaki: Vulcan 800/1500/1600
Yamaha: '99-'07 Road Star 1600/1700, Royal Star Venture, V Star 650/1100

This slip-on chrome accent is a great way to finish unsightly transitions. Just slip it into place & tighten the set screw - it's that easy!

Fitment:
H-D: Clutch Cables on '87-'99 Big Twin & '91-'06 Sportsters
Metric: V Star 650 Models

This slip-on chrome accent is a great way to finish unsightly transitions. Just slip it into place & tighten the set screw - it's that easy!

Fitment:
H-D: Clutch Cables on '87-'99 Big Twin & '91-'06 Sportsters
Metric: V Star 650 Models

It's time to finish the job with our Chrome Throttle and Idle Cable Covers.  Quick and easy installation - Requires no disassembly of your controls or cables.

Fitment: All '82+ Models with 90 Degree Cable Elbows

Our spider themed hand grips are a radical departure from average. Designed with style and comfort in mind, with an integrated, adjustable throttle boss, these grips make a great addition to our Widow Pegs and Widow Shift Linkage.

Our spider themed hand grips are a radical departure from average. Designed with style and comfort in mind, with an integrated, adjustable throttle boss, these grips make a great addition to our Widow Pegs and Widow Shift Linkage.

It's hard to imagine any piece of cool metal feeling better in your hand. Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.

6291 Fits: '82+ H-D Models with dual cable throttle control

6293 Fits: '08+ H-D Models with electronic throttle control (Electra Glides, Road Kings, Road Glides, Street Glides, Trikes)

The look is purely wicked, but they look & feel is so cool! Smooth chrome bodies with vibration absorbing rubber inserts assure a comfortable & secure grip to keep control in hand. Zombie end caps enhance the specter of evil as the numbers of this coven of accessories continue to multiply. Zombie Throttle Boss included or sold separately - fits right side only.

Our original retractable passenger pegs redefined passenger comfort. The test of time and input from customers has helped us to refine this popular accessory, improving its fit and function. This kit gives you the ability to move your feet up or down and best of all when the driver has his or her feet on the highway pegs you can stretch your legs by laying your calves on the footrests. You will love the flexibility. A bolt action locking device on the swing arm adds one intermediate position to make hours in the passenger seat more enjoyable for passengers of different heights. A revised mounting system allows easier installation and improved fit on newer models. Does not interfere with footboard operation.

Fitment:
'93-'08 with Stock (black) Mounts,
'04-'06 Screamin' Eagle FLHTCSE and FLHTCUSE with Rinehart Exhaust,
'07-'08 Screamin' Eagle FLHTCUSE with Rinehart Exhaust ('07-'08 Screamin' Eagle Ultra Classics must remove the stock adjustable passenger board mounts and replace them with fixed mounts.)
'93-'09 with Chrome Küryakyn Mounts (P/N 4536) or Chrome H-D Accessory Mounts (H-D P/N 53070-00)
'93-'08 with Chrome Küryakyn Mounts (P/N 4536) or Chrome H-D Accessory Mounts (H-D P/N 53070-00) & Rinehart Exhaust
'93-'08 with H-D Chrome or Black Passenger Floorboard Support Kits (H-D P/Ns 52714-04 or 50378-07) & Rinehart Exhaust
Street Glide, Road King Custom, Screamin' Eagle Road King, or other Touring Models that come with Passenger Pegs (see note below)
Street Glide, Road King Custom, Screamin' Eagle Road King, or other Touring Models that come with Passenger Pegs with Rinehart Exhaust (see note below)
NOTE: Street Glide and other Models updating from passenger pegs to passenger boards may substitute H-D accessory passenger boards for our ISO-Passenger Boards.