These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The Platinum Series is a bright silver plated braid. Barnett has provided Motorcycle cables since 1948.

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need! Unless otherwise noted, over/under length is for the top line (where applicable).

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXDWG-I '06-'07;  FXDWG Anniv. '08;  FXDB-I '06+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The Platinum Series is a bright silver plated braid. Barnett has provided Motorcycle cables since 1948.

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need! Unless otherwise noted, over/under length is for the top line (where applicable).

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXDWG-I '06-'07;  FXDWG Anniv. '08;  FXDB-I '06+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXD 96-99;  FXDB, FXDC, FXDL, FXDS, FXDWG 92-95;  FXDL 96-00;  FXDS-Conv, FXDWG 96-05;  FXDWG 02-05

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXD 00-05;  FXDC, FXDC-I 2005;  FXD-I 04-05;  FXDL 01-05;  FXDL-I 04-05;  FXDX 00-05;  FXDXT 02-04

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXR 87-94;  FXRS 87-95;  FXRS Conv L89-95;  FXRT 87-92

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXR-4 2000

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXLR 87-95

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXDC 08+;  FXDL-I 06+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXDB-I35, FXDC-I 06-07;  FXD-I 06+;  FXDWG 10+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXDF 08+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FXLR 1987;  FXRD 1986;  FXRS Sport Edition '87-'89;  FXRT '83-'89

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FXLR '88-'89

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FXDB 1991;  FXDB, FXDC, FXDL, FXDS, FXDWG '92-'95
FXLR, FXRS, FXRS Conv. '90-'95;  FXRS Sport Edition '90-'94;  FXRT '90-'92

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FXD, FXDL '96-'05;  FXDC, FXDC-I 2005;  FXDS-Convert, FXDWG '96-'05;  FXD-I. FXDL-I '04-'05
FXDWG '96-'05;  FXDWG-I '04-'05;  FXDX, FXDXT '00-'05 
FXR-2, FXR-3, FXR-4 '99-'00

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FXDG L83;  FXR, FXRS '82-'89;  FXRC L85, L87;  FXRS Conv L89;  FXRS Sports Edition '85-'86;  FXWG '81-'86

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FXDB-I35, FXDC-I '06-'07;  FXDC '08+;  FXDC-I '06-'07;  FXDL-I '06+;  FXDWG '10+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXD-I '06+;  FXDF '08+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FXDFSE '10+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXDB-I '06+;  FXWG-I '06-'07;  FXWG-Anniversary 2008

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXDWG Anniv. 2008;  FXWG-I '06-'07