- Move the mouse over the thumbnail to see bigger pictures.
- To see the shipping cost, if any, just add the items to the shopping cart and then enter your zip code.
- The wrenches "
" indicate the difficulty level for installing the product. - Can't find what you're looking for? Click here to send us and an email
- New metric cruiser engine kits are the only 100% complete kits on the market
- Every specialty fastener used on these bikes is reproduced in stainless steel and polished to a mirror finish
- To help protect the finish on your bike - whether it be chromed, painted or powder coated - kits include special small washers that fit under the head of all M6 engine cover bolts.
- Includes bolts for -Generator cover, clutch cover, timing cover, pulley cover, left side transmission cover, top and side lifter block screws, cylinder side screws, air cleaner , case bolt, oil lines, clutch cable arm and rocker boxes
Usually ships next day
Usually ships next dayUsually ships next dayUsually ships next day
You can take a look at the instructions (PDF format)
Usually ships next day
Take a look at the instructions (PDF format) for more information
In stock
Fits all Yamaha cruisers with choke knob.
Usually ships next dayIn stock
*Requires aftermarket oil filter relocation kit to be installed
Usually ships next dayUsually ships next dayUsually ships next day
- Fits under the dash.
- Machined from aluminum and formed to follow the curve of your gas tank
Cover the "raw" fron axle with these fork tips. Easy to install, they will add a touch of chrome in a often overlooked area.
In stock
Sticks on lower frame with 2 way tape. Accents the shape of the frame.
Covers the frame behind the driver's seat.
Allows viewing of meter (dashboard) while adding a beautiful piece of chrome. Glued with supplied silicone.
Simple bolt-on that immediately improves the appearance of your VStar (both 650 and 1100, all models).
- Complements the entire Jardine line and many other custom parts
- Fits 650 Classic/Custom 97-04 and 1100 Custom 99-04
Usually ships next day
Usually ships next day
In stock
Note: 4210 replaces pivot pins with shank diameter of 7.9mm and shank length of 32mm. Thread diameter is 6mm with a thread length of 10mm.
Usually ships next day
Usually ships next day
Usually ships next day
- Triple chrome-plated fender trim features square nose sual-rail look
- Blends with the fender striping as though it should have been there all the time
- Does not include emblems
Usually ships next day
Add a beautiful chrome finish to an otherwise unattractive area. Installs in minutes.
Chromed ABS cover to replace OEM black cover, uses existing hardware to mount.
Chromed stamped steel Caliper Covers with unique stepped and terrace design.
Mounts with provided hardware.
Available in a left and right version to fit late model V-Star 650, Road Stars and Royal Stars (V-Star 1100 sold as pair only).
Usually ships in 7 days
Precision-machined ball milled design, highly polished chrome-plated finish. Chrome hardware included for easy installation.
Usually ships in 7 days
Replace the stock painted side covers with these chrome-plated injected molded ABS covers for a custom accent. Sold in pairs.
Usually ships in 7 days
Cast metal fender tips are polished and chrome-plated to a brilliant finish for a classic look. Cast metal fender tips are polished and chrome-plated to a brilliant finish for a classic look.
Note: Installation requires drilling of fenders.Usually ships in 7 daysIn stockUsually ships in 7 days
Usually ships in 7 days
- Here's a nice shiny piece of chrome to spice up your bike and make it set apart from the other bikes
- Must drill fender to install
Show chrome finish Free Spirit raised eagle master cylinder covers are a great finishing touch to set off those handlebars. Sold each.
Fitment: V-Star 650/950/1100/1300
Live to Ride horn Covers are constructed of lightweight ABS with a shiny chrome finish. The design of the cover is a classic.
Easy to install with no tools necessary, it snaps on and covers up the unattractive black OEM horn. It is designed to fit 3-1/4” horns on Yamaha Cruisers at a fraction of the cost of other after market horn covers. Snap one on today and turn your OEM horn into a Show Chrome Accessories horn.
Fits 3 1/4"" round horns - Yamaha V-Star 650 Custom/Classic, V-Star 1100 Custom/Classic.
Vantage Horn Covers are constructed of lightweight ABS with a shiny chrome finish. The stylish design of the Vantage Horn Cover hints at movement without affecting the resonance of the horn.
Easy to install with no tools necessary, the Vantage Horn Cover snaps on and covers up the unattractive black OEM horn. With its two clip inner tapered design; it is designed to cover both 3” and 3-1/4” horns for most Kawasaki and Yamaha Cruisers. The Vantage Horn Cover gives your bike a custom look at a fraction of the cost of other after market horn covers. Snap one on today and turn your OEM horn into a Show Chrome Accessories horn.
Fits 3" and 3 1/4" round horns - including most Yamaha and Kawaski Cruisers.
Conceal that unsightly front axle and ugly bottom hardware in a new and stylish way. Starting with a three-pound piece of 6061-T6 billet aluminum, we CNC machine this into a bullet-shaped cover with a final weight of 3/4 pound each! Aeromach's Fork Bullets slide easily over the bottom of the front lower legs and grip tightly with two stainless steel set screws. Extreme eye catcher!
AM-5000C-05 Includes stainless steel bolt kit (AM-5005) for applications that replaces the four pinch bolts on the forks. Honda models: VTX 1300 R/C, VLX 600, Up to 2001 750 ACE, Up to 2001 1100 ACE/Aero, Up to 2001 1100 Tourer, Up to 1999 Valkyrie (not Interstate) & Up to 2001 Sabre. Victory: Kingpin.
Vulcan 800, 800 Classic, 1500 Classic, Drifter 800/1500, Will NOT fit 03+ Mean Streak
Contains 2 covers. One for brake and one for clutch master cylinders. Smooth chrome finish.
In Stock
Universal fitment. Will not work on handlebar-mounted choke pulls.
Fits the following bikes: Magna Shadow Ace, Shadow Aero, Shadow Sabre, Shadow Spirit, Valkyrie, VLX, VTX 1300, 1500 Classic, 1500 Drifter, 1500 Meanstreak, 1500 Nomad, 1600 Classic, Intruder 1400, Intruder 800, Intruder LC 1500, Marauder, Volusia, Road Star, Royal Star, V Star 650 Classic, V Star 650 Custom, Venture
In stock
In stock
Chromed stamped steel Caliper Covers with unique stepped and terrace design.
Mounts easily with provided hardware.
Available in a left and right version to fit late model V-Star 650/950, Road Stars and Royal Stars..
Usually ships next dayUsually ships next dayUsually ships next day
Made to hide and protect the front of the motor. Show chrome. Attaches directly to the frame.
- Available in 10" long or 7" short styles
- Measure 2 1/4" in diameter
- Open on both ends for easy access
- Now available with clamps for 1" to 1 1/4" and 1 1/2" frames
Usually ships next dayUsually ships next dayUsually ships next dayUsually ships next day
- Chrome-plated grille with Celestar design
- Highlights and changes the appearance of the stock taillight
- Mounts using existing lens mounting screws
In stock
- Celestar design matches other Show Chrome Celestar accessories
- Attach directly to OEM turn signal
- Fit Most Yamaha using OEM 42X833120000 Lens - ex: V-Stars, RoadStars, V-Max, etc.
- Sold in pairs
For Cruisers with smooth face turn signals.
Fitment: Yamaha Stars, VMax, Honda late cruisers with smooth face lenses.
sold as a pair.
This attractive chrome choke knob cover installs easily without removing or modifying the stock choke knob.
Fits:
Honda: VTX1300, '04-'05
Shadow Aero 750
Kawasaki: 800 Vulcan and 1500 Vulcan (single carb only)
Suzuki: '98-'05 Intruder 1500LC/Boulevard C90
Yamaha: Road Star 1600, Royal Star Venture, V-Star 1100, and V-Star 650
Harley: For 88-04 XL models and 90-04 Big Twin
In stock
Dress up those drab stock rider (driver) boards with these finely chromed covers. Rubber inserts add comfort and give your boots a better grip. To install, just peel off the stock rubber layer, pop the cover into place, and screw the cover onto the stock board from the bottom. Fits: ‘98-’04 V-Star 1100 and ‘99-up Road Star 1600/1700.
In Stock
Reflector Covers Large (pr)
Fits: Front, All Yamaha Road Star, V-Star, 1100, Royal Star and Royal Star Venture.
Rear, All Honda VTX 1800 (ex. C), 1300 Retro, and other motorcycles with reflectors that are 3-1/2" by 1-3/8" or smaller with 1/4" of clearance around the reflector.
Usually ships next day
Fits 98-05 V-Star 650 and 99-05 V Star 1100
In Stock
In stock
Cover up unsightly housings and create a smooth, full-custom look with these clamshell-design chrome covers. They install easily and encapsulate the stock housings without interfering with control functions. Sold in pairsCover up unsightly housings and create a smooth, full-custom look with these clamshell-design chrome covers. They install easily and encapsulate the stock housings without interfering with control functions. Sold in pairs
Fitment for part # 0616-0011
VStar 650 Custom
Roadstar 1600/1700
Vulcan 2000
Meanstreak
Marauder 1600/Boulevard M95
Fitment for part # 9117
VStar 650 Classic and Silverado
Vulcan 1600
In StockIn StockIn stock
Unique clamshell design replaces the stock rubber brake pedal cover. Highly polished and specially treated to provide a durable and rich chrome finish. Machined billet housing with replaceable rubber inserts.
Usually ships in 7 days
Choose from the wide variety of caps and covers to give components on your Star the right personalized look. Each item is precisely machined, then highly polished and specially treated for the most durable chrome finish. Ball-milled styles have an internal mounting ring to allow adjustment of the line angle for best appearance. Metric Allen mounting screws included.
Usually ships in 7 daysUsually ships in 7 daysIn stockUsually ships in 7 days
Details the taillight for a custom look. Adhesive backed for quick and easy installation.Details the taillight for a custom look. Adhesive backed for quick and easy installation.
Fits all Royal Star, V Star 650 Classic ‘98~’03, V Star 1100 ’01~’03, Road Star Standard ‘99~’03 and Silverado ‘99~’03
Usually ships in 7 days
Each item is precisely machined, then highly polished and specially treated for the most durable chrome finish. Ball-milled styles have an internal mounting ring to allow adjustment of the line angle for best appearance. Metric Allen mounting screws included.Each item is precisely machined, then highly polished and specially treated for the most durable chrome finish. Ball-milled styles have an internal mounting ring to allow adjustment of the line angle for best appearance. Metric Allen mounting screws included.
Note: Fork Cap Covers are sold as a pair. Fork Stem Nut Cover sold each.
Usually ships in 7 daysUsually ships in 7 daysIn stockIn stock
These are beautifully cut by a precision CNC water jet machine, and then chrome plated. They are extremely durable and will keep their mirror finish even after being blasted by gravel and sand from the road.
These will completly transform the front end of your bike. Covers the lower fork leg, the ugly axle bolt and other miscellaneous hardware, also covers the brake calipers.
Installation is simple using the supplied universal fork clamps and hose clamps. Includes all necessary mounting hardware including rubber to protect your forks.
These fit 95% of ALL bikes with NON INVERTED FORKS!
Note: VTX1300C/R owners should use KM-234 instead, this is identical except for a pre-cut notch to accomodate the larger than normal fender mount strut on the VTX1300's.
