Add a beautiful set of passing lights to your VStar. Add the Smart Switch to turn the lights on when you desire in combination with either high or low beams. Lights included. The Option "D" picture was taken from a Suzuki cruiser model and it's used only to show the alternative style for the lights.

• Fits under the dash.
• Machined from aluminum and formed to follow the curve of your gas tank

Cover the "raw" fron axle with these fork tips. Easy to install, they will add a touch of chrome in a often overlooked area.

Sticks on lower frame with 2 way tape. Accents the shape of the frame.

Covers the frame behind the driver's seat.

Allows viewing of meter (dashboard) while adding a beautiful piece of chrome. Glued with supplied silicone.

Simple bolt-on that immediately improves the appearance of your VStar (both 650 and 1100, all models).

Adjustable forward and backward by 3 inches. Folds forward for passenger access. Solidly bolted to the bike. Compatible with Custom World hard bags and Leatherlyke. Fits with stock seat.

Made to hide and protect the front of the motor. Show chrome. Attaches directly to the frame.

• Billet aluminum.
• Designed specifically for each model.
• Show chrome finish.

• Easy installation.
• Replace OEM footpegs.
• Chrome billet aluminum.
• Multi adjustable for exceptionnal comfort: Angle; Rotation; Fore / Aft
• Holes drilled for hellrest.
• Vibration damping rubber.
• Bolts to prevent scraping in corners.
• Spring mounted.
• Dimensions: 4.25� x 11.25�

• Sold in pairs.
• Chromed billet aluminum.
• Fit on OEM floorboards.
• Pivots back and forth 5� or 12.7 cm.
• Anti-vibration rubbers.

• Works with your hi-lo switch
• Extra security; no extra switch
• Hidden anywhere on your bike to control any auxiliary light.
• Activated by any switch on your bike

• Designed to reduce the space between the fender and the saddlebag
• No saddlebag support required
• Protective cover included
  
• Exceptional finish
• Holds it's shape
• Extra large opening
• Leather and ABS
  
• 11.5 H x 8.5 W X 18 L

• Fits OEM backrest
• No welds
• Mounting kit included
• Stylized

• Stylish curved luggage rack
• Beautiful chrome finish
  

• Made to add style to your bike
• Max load 2.2lb (1kg)
• Includes mounting kit

• Show chrome finish.
• 3 sizes available: 3", 4", and 5".
• 1-1/2 pullback.
• Fits Vstar 650 Custom and Classic, Vstar 1100 Custom and Classic.
  

• Tubular bar is wider at the top
• Different look for modern motorcycles
• Two sizes of pad available with optional studs

These side arms can be used to mount both square and round sissy bars by Custom World. All the bolts required to mount the hardware to your bike are included. Also included are spacers to allow the mounting of the backrest without the luggage rack and nylon washers to protect the fender paint. The side arms are mounted between the fender and the "eyebrows", see picture.

• Solo rack replaces passenger pillion
• Uses existing mounting holes
• Chrome
  

If you want to give that "solo" look to your bike without buying a new rear feander, here is the solution for you. Remove the passenger pillion and put this bueatifully chromed solo rack in it's place. For the occasional "two-up" use item If you want to give that "solo" look to your bike without buying a new rear feander, here is the solution for you. Remove the passenger pillion and put this bueatifully chromed solo rack in it's place. For the occasional "two-up" use item

Tired of cleaning those spokes? Just apply these wheel covers for a great custom look!Tired of cleaning those spokes? Just apply these wheel covers for a great custom look!

• Easier to keep your wheels clean
• Made to cover spoke wheels
• Add style to your bike
• Give the look of solid wheels

• Available in both Black and White Face and White Face w/Lumiglow.
• Bridge mount for 1" bars.
• 0-8000 RPM.
• Installed in a chrome billet aluminum case.
• Adapter available to make tachometer compatible with twin coils

• Fits on all CWI backrests (square and tubular)
• Larger and longer for more storage
• Billet aluminum
• No Welds
• Dimensions: 10" L x 12" W
  

• Here's a nice shiny piece of chrome to spice up your bike and make it set apart from the other bikes
• Must drill fender to install
  

• 0-8000 RPM
• Lumiglow available in white face only
• Installed in a chrome billet aluminum case
• Available for 1", 1 1/4" and 1 1/2" handlebars
• Adapter available to make tachometer compatible with twin coils

• 0-8000 RPM
• Installed in a chrome billet aluminum case
• Available with a black or white face
• Available for 1", 1 1/4" and 1 1/2" handlebars
• Adapter available to make tachometer compatible with twin coils

Made to hide and protect the front of the motor. Show chrome. Attaches directly to the frame.

• Compatible with CWI backrests as well as others with exterior mount bolts.
• Made for CTR to CTR distance of 1 1/4" to 2 3/8"
  making them compatible with most backrests.
• They move outwards to ease access.
• The angle is adjustable to work with most backrests.
• Mount kit included for CWI and certain OEM backrest.

• Show chrome finish
• 3 sizes available: 3", 4", and 5"
• 1-1/2 pullback