Covers the left side of the frame behind the motor. Elongates the look of the motor with an addition of chrome where it's sorely missing. Easy installation, low-cost, immediate gratification.

Die-Cast Show Chrome finish Oil Filler Caps replace OEM ABS filler caps. Uses existing OEM O-Ring.

FItment: VT1100 Shadow (NOT Aero or Sabre)

Chromed stamped steel Radiator Grille replaces OEM on bike to give the radiator a dazzling chrome finish without affecting radiator air flow.

Fits with Show Chrome Highway Bars (may not fit with some after market bars).

This classic fuel shut off know gives your shut off valve assembly a custom look.

Knob only - cover sold separately.

Fitment: VT1100 & VT750 Shadows (not Aero's), VTX1300

A chromed stamped steel piece to cover the front brake caliper. Created in the popular raised chrome design. Mounts easily with hardware included.

Set of 4 CNC covers for drive shaft bolts.

Fitment: VTX1300/1800, Valkyrie, VT1100, VT750 Aero & Spirit C2

Show chrome finish Smooth, Tear Drop or Free Spirit raised eagle design master cylinder covers are a great finishing touch to set off those handlebars. Sold as a pair (some have singles available).

Fitment: VTX 1800, VTX 1300, VT1100 (87-96), GL1500, GL1800, Royal Stars

Replaces original OEM face clamp cover with bright, chrome replacement.

Fitment: Most Honda Cruisers

Show chrome finish Smooth or Free Spirit raised eagle master cylinder cover is a great finishing touch to set off those handlebars. Sold as each

Fitment: RoadStar, VLX, VT750, VF750, VTX1300, VT1100 (97+)

Vantage Horn Covers are constructed of lightweight ABS with a shiny chrome finish. The stylish design of the Vantage Horn Cover hints at movement without affecting the resonance of the horn.

Easy to install with no tools necessary, the Vantage Horn Cover snaps on and covers up the unattractive black OEM horn. With its two clip inner tapered design; it is designed to cover both 3” and 3-1/4” horns for most Kawasaki and Yamaha Cruisers. The Vantage Horn Cover gives your bike a custom look at a fraction of the cost of other after market horn covers. Snap one on today and turn your OEM horn into a Show Chrome Accessories horn.

Fits 3 1/2" round horns - most Honda Cruisers.

Chrome oil cap with attached dipstick. Replaces OEM. Use with existing OEM "0"-ring.

Fitment:
0710-0025 is for VT750 ACE (98-03), Spirit DC (01-08)
DS720731 is for VT750 Aero & Spirit C2

This stamped steel chrome piece fits over the Honda black drive shaft for a beautiful chrome finished look. Easily and securely mounts with double sided tape.

Fits Honda VT750 Aero & Spirit C2, VT1100, VTX 1300 & 1800 models.

These chrome covers turn the top of your otherwise boring steering head pivot and fork tops into a chromed work of art!

28mm Diameter.

Contains 2 covers. One for brake and one for clutch master cylinders.  Smooth chrome finish.

Classic horn Covers are constructed of lightweight ABS with a shiny chrome finish. The design of the cover is a classic.

Easy to install with no tools necessary, it snaps on and covers up the unattractive black OEM horn.  It is designed to fit 3-1/2” horns on most Honda Cruisers at a fraction of the cost of other after market horn covers. Snap one on today and turn your OEM horn into a Show Chrome Accessories horn.

Fits 3 1/2"" round horns - most Honda Cruisers and other 3 1/2" horns

Covers the left side of the frame behind the motor. Elongates the look of the motor with an addition of chrome where it's sorely missing. Easy installation, low-cost, immediate gratification.

• Four piece chrome plated trim set
• Features the raised teardrop designs
• Mounts with included double side adhesive tape

• This chromed steel extension dresses up front and rear fenders.
• Help reduce amount of water spray in wet conditions
• Sold each

• Raised teardrop design gives that custom look everyone wants
• Easily attach to stock turn signals using double-sided adhesive tape provided (face mount visors)
• Sold in pairs

For Cruisers with smooth face turn signals.

Fitment: Yamaha Stars, VMax, Honda late cruisers with smooth face lenses.

sold as a pair.

Chromed stamped steel Radiator Grille replaces OEM on bike to give the radiator a dazzling chrome finish without affecting radiator air flow.

Fits with Show Chrome Highway Bars (may not fit with some after market bars).

Fitment
VTX1800 
VTX1300 
Shadow Aero - VT750C
Shadow Sabre - VT1100C2/VT1100C2A

These are beautifully cut by a precision CNC water jet machine, and then chrome plated. They are extremely durable and will keep their mirror finish even after being blasted by gravel and sand from the road.

These will completly transform the front end of your bike. Covers the lower fork leg, the ugly axle bolt and other miscellaneous hardware, also covers the brake calipers.

Installation is simple using the supplied universal fork clamps and hose clamps. Includes all necessary mounting hardware including rubber to protect your forks.

These fit 95% of ALL bikes with NON INVERTED FORKS!

Note: VTX1300C/R owners should use KM-234 instead, this is identical except for a pre-cut notch to accomodate the larger than normal fender mount strut on the VTX1300's.