Cobra has created what may be the best 2-into-1 pipe ever built. Its beauty comes from a fresh traditional design, and it has the kind of modern features no other 2-into-1 pipe has. It shines with triple-chromed, full-length heat shields, and has a unique and stunning collector heat shield so there are no visible welds in this collector area. The megaphone uses exclusive technology inside it to eliminate the chances of the muffler ever turning blue. On top of that, because of the hundreds of man hours we spent in the dyno room the PowerPro 2-into-1 produces class-leading horsepower from the moment you install it and roll on the throttle.

It’s what you don’t see that makes all the difference. Cobra’s innovative Speedsters, offered in 3 versions, Slash Downs, Shorts and Longs, do more than break new styling ground. With their triple-chromed, 2-1/2”, full-length heat shields and clean stylish lines they’re some of the best-looking exhaust systems available.
Tucked away behind those shields is the Cobra™ PowerPort, an engineering advancement that provides a performance increase similar to what you get from a 2-into-1 system. The PowerPort was developed to increase power, and to maintain overall rideability while remaining discreetly out of sight. And it does that while retaining all the great sound and style you expect from Cobra™.

• PowerPort increases power and overall rideability
• The large 2-1/2” full-length heat shields fit tip-to-tip for seamless look and no bluing
• Beautifully machined billet end caps for truly custom finish
• Easy installation
• Fit and finish is the best in the business
• Available in slash down, short and long versions
• Lifetime warranty
• Made in the USA

Speedster pipes form a wonderful blend of traditional styling and modern performance technology. These triple-chromed, classically styled pipes feature full-length, 222-degree heat shields, chromed aluminum billet tips and are available in long and short versions. They also deliver power gains over stock that are among the highest in the business. In part those gains come from the Cobra PowerPort, our proprietary crossover technology that helps to increase overall power from idle to redline. Our engineers here at Cobra virtually lived in the dyno room testing, refining, then testing some more to get the best horsepower gains balanced with real-world rideability. The end result is our dyno-proven-and-tested PowerPort provides the kind of power increase you normally experience with a 2-into-1 system, while retaining the clean classic lines of a 2-into-2 pipe.

Cobra Freeway Bars are made from 1.25" thickwall steel and deeply chromed for strength and long-lasting good looks. They offer your tired dogs a different place to rest on those long hauls--and provide a classic appearance. A no-problem installation.

COBRA™ FATTY FREEWAY BARS
Cobra Fatty Freeway Bars are designed to handle today’s larger motorcycles. Because the latest generation of cruisers are larger than ever before—longer, taller, heavier, with larger displacement engines—we’ve added a beefed up companion to Cobra's standard Freeway Bars. With larger 1-1/2” diameter steel tubing, Cobra's Fatty Bars are stronger, offering a greater level of protection for accidental drops. And because of their larger tubing, they present a greater proportional fit on the larger machines.
The bars offer a wider range of fitments and are not limited to the super cruisers.
• Stylish update to traditional cruiser look with improved functionality
• Cobra Chrome-plate mild steel for durability
• Custom-fit to each model for hassle-free installation
• Works with all Cobra accessories including lightbars and floorboards
• Larger 1-1/2” diameter tubing
• Made in the USA

Our new Speedster pipes form a wonderful blend of traditional styling and modern performance technology. These triple-chromed, classically styled pipes feature full-length, 222-degree heat shields, chromed aluminum billet tips and are available in long and short versions. They also deliver power gains over stock that are among the highest in the business. In part those gains come from the Cobra PowerPort, our proprietary crossover technology that helps to increase overall power from idle to redline. Our engineers here at Cobra virtually lived in the dyno room testing, refining, then testing some more to get the best horsepower gains balanced with real-world rideability. The end result is our dyno-proven-and-tested PowerPort provides the kind of power increase you normally experience with a 2-into-1 system, while retaining the clean classic lines of a 2-into-2 pipe.

• The culmination of 24 years of hands-on experience designing and building exhaust systems
• A flawless cruising look with the sought-after sound of American iron
• Triple chrome plating
• Instructions and mounting hardware included
• Cobra Jet Kits or Fi2000 Digital Fuel Processors (for fuel injected models) are recommended when installing most exhaust systems
• Made in the U.S.A.

• The culmination of 24 years of hands-on experience designing and building exhaust systems
• A flawless cruising look with the sought-after sound of American iron
• Triple chrome plating
• Instructions and mounting hardware included
• Cobra Jet Kits (for carburated models) or Fi2000 Digital Fuel Processors (for fuel injected models) are recommended when installing most exhaust systems
• Made in the U.S.A.

• Original classic design brings a big, tasteful look to any cruiser
• Quick and painless installation-all kits bolt tight on
• More leg room
• Outstanding vibration isolation
• Classic American looks
• Rear kits, available for many models, are CNC-machined from solid billet aluminum
• Made in the U.S.A.

• Matches perfectly with Cobra small frames
• CNC billet aluminum and chrome-plated

• Tuck in stock O.E.M. turn signals
• Comes with everything needed to install

• Allows you to lower the rear 1 to 1 3/4"
• Comes complete with everything needed
• Made of steel and powder-coated in a black gloss finish

Bolt-on a strong and good looking luggage rack to your existing Cobra Sissy Bar. Made of sturdy steel tubing and designed to bolt-on in minutes. Built for the person who wants the best, with no hassles or headaches on the open road.Bolt-on a strong and good looking luggage rack to your existing Cobra Sissy Bar. Made of sturdy steel tubing and designed to bolt-on in minutes. Built for the person who wants the best, with no hassles or headaches on the open road.

• Bring the handle bars up slightly
• Hide the mounting bolts underneath
• Available in Scalloped and Fluted finish
• Made from CNC billet stock

Cobra chrome Sissy Bars make life easier for your passengers by offering back support. They also help carry your T-Bag or similar product when carried on the passenger seat. Built for the long haul, these sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a Freedom Pad. Now available in three sizes; Standard 17" tall, Short 14" tall, and Mini 11" tall. Cobra's Sissy Bars use stock mounting points for a no fabrication installation. Cobra chrome Sissy Bars make life easier for your passengers by offering back support. They also help carry your T-Bag or similar product when carried on the passenger seat. Built for the long haul, these sissy bars are made of high strength steel with heavy-duty mounting brackets and comes with a Freedom Pad. Now available in three sizes; Standard 17" tall, Short 14" tall, and Mini 11" tall. Cobra's Sissy Bars use stock mounting points for a no fabrication installation.

• Keep throw-over saddlebags from getting tangled in the rear wheel
• Attaches to existing mounting points for easy installation
• Made from sturdy chromed steel
• Made in the USA

Bolt-on a strong and good looking luggage rack to your existing Cobra Sissy Bar. Made of sturdy steel tubing and designed to bolt-on in minutes. Built for the person who wants the best, with no hassles or headaches on the open road.Bolt-on a strong and good looking luggage rack to your existing Cobra Sissy Bar. Made of sturdy steel tubing and designed to bolt-on in minutes. Built for the person who wants the best, with no hassles or headaches on the open road.

• High-quality heat shields look great and keep you cool
• Heat shields available in three sizes to fit most pipes
• Shields are triple chrome-plated and highly polished for a non-blueing look for years to come
• Come complete with clamps for mounting
• Sold each
• Made in the U.S.A.