MBW's radiused sidemount is the first of its type to be specifically designed for Victory bikes and incorporates their original belt tensioning gauge design. The entire piece is triple show chrome plated and utilizes a steel mounting arm for strength with a CNC machined billet aluminum plate frame assembly. A true radius piece, its curvature is an excellent match to the rotor and pulley.

Another industry first is its use of all new 90 degree mounted LEDs for plate illumination resulting in a brilliant HID like blue-white light. Their side "firing" light allows for the only true way to achieve a uniform glow along the radius' curve, and its even and wide light spread spectrum helps eliminate dark spots. The unique one-piece plate frame design allows for a super clean look and its blind design eliminates unsightly plate mounting hardware. This is a truly ground-up designed custom part that is an awesome compliment to custom LED turn signals that will set your ride apart. Slight trimming of standard size plates (4x7) may be required (or photocopy of license plate can be used, check local regulations before ordering).

Note: These items are made to fit the Vegas, Kingpin and V92C. However, removal of the rear brake line clamp or substitution of a lower profile bolt is required on the V92C installation.

HS-300 fits:
   05-06 Hammer and 06 Jackpot WITH stock tear-drop shaped belt tension gauge
   07+ Hammer & Jackpot WITH chrome swingarms (which will have the tear-drop shaped belt tension gauge)
   06+ Ness Jackpot IF the billet axle cover is removed and a stock belt tension gauge is installed (Victory #5247599)

HS-307 fits:
   03+ Vegas, Kingpin & 8-Ball
   07+ Hammer, Jackpot WITH oval shaped belt tension gauge (painted swingarms)

<p>Undeniably the trickest product made for the Kingpin, and an awesome compliment to matching front and rear turn signals; MBW's Kingpin Radius Laydown Plate picks up where other designs have left off.  Slammed to the fender, its curved design closely follows the contour of the fender while maintaining maximum visibility.  Made from CNC machined and triple chrome plated billet aluminum, the  two piece design is made up of  a mounting block that bolts to the fender using the stock hole locations (and rubber gasket) and a blind plate design with no external hardware for an incredibly clean look. 90 degree LEDs illuminate the entire width of the plate and cast a white glow. Slight trimming of standard size plates (4x7) may be required (or photocopy of license plate can be used, check local regulations before ordering.)

MBW's radiused primary mount is the first of its type to be specifically designed for Victory bikes. The entire piece is triple show chrome plated and utilizes a steel mounting arm for strength with a CNC machined billet aluminum plate frame assembly. A true radius piece, its curvature is an excellent match to the rotor and pulley.

Another industry first is its use of all new 90 degree mounted LEDs for plate illumination resulting in a brilliant HID like blue-white light. Their side "firing" light allows for the only true way to achieve a uniform glow along the radius' curve, and its even and wide light spread spectrum helps eliminate dark spots. The unique one-piece plate frame design allows for a super clean look and its blind design eliminates unsightly plate mounting hardware. This is a truly ground-up designed custom part that is an awesome compliment to custom LED turn signals that will set your ride apart. Slight trimming of standard size plates (4x7) may be required (or photocopy of license plate can be used, check local regulations before ordering).

Fits:   03+ Vegas, Kingpin, Hammer, Jackpot

MBW's radiused sidemount is the first of its type to be specifically designed for Victory bikes and incorporates their original belt tensioning gauge design. The entire piece is triple show chrome plated and utilizes a steel mounting arm for strength with a CNC machined billet aluminum plate frame assembly. A true radius piece, its curvature is an excellent match to the rotor and pulley.

Another industry first is its use of all new 90 degree mounted LEDs for plate illumination resulting in a brilliant HID like blue-white light. Their side "firing" light allows for the only true way to achieve a uniform glow along the radius' curve, and its even and wide light spread spectrum helps eliminate dark spots. The unique one-piece plate frame design allows for a super clean look and its blind design eliminates unsightly plate mounting hardware. This is a truly ground-up designed custom part that is an awesome compliment to custom LED turn signals that will set your ride apart. Slight trimming of standard size plates (4x7) may be required (or photocopy of license plate can be used, check local regulations before ordering).

Note: These items are made to fit the Vegas, Kingpin and V92C. However, removal of the rear brake line clamp or substitution of a lower profile bolt is required on the V92C installation.

Note: These items include built-in LED plate frame. Trimming of your license plate may be necessary.

Made from 3/16ths steel and triple chrome plated for a show finish, these sidemounts are incredibly sturdy, and an excellent compliment to your Victory. Horizontal and vertical configurations in one bracket! Made from 3/16ths steel and triple chrome plated for a show finish, these sidemounts are incredibly sturdy, and an excellent compliment to any Victory.

Note: does NOT include plate frame or plate illumination. Illumination plates are sold separately.

HSS09 fits:
   05-06 Hammer and 06 Jackpot WITH stock tear-drop shaped belt tension gauge
   07+ Hammer & Jackpot WITH chrome swingarms (which will have the tear-drop shaped belt tension gauge)
   06+ Ness Jackpot IF the billet axle cover is removed and a stock belt tension gauge is installed (Victory #5247599)

VSS09 fits:
   03+ Vegas, Kingpin & 8-Ball
   07+ Hammer, Jackpot WITH oval shaped belt tension gauge (painted swingarms)

• LED light in the center of each bolt; one red and one blue
• LEDs flash - great for wiring to brake lights
  

• LED light in the center of each bolt; one read and one blue
• LEDs flash - great for wiring to brake lights

Chome plated stainless steel state inspection tag mount.

Mounting surface measures 3-1/2" by 2-3/8"

Cast with LED illumination for plate. Mounting hradware included.

Note: for standard 4x7 plates

Made from 6010 billet aluminum and plated with Show quality chrom state inspection tag mount.

1/2" mounting hole. Square sticker area measures 2-3/4"" by 2-3/4" - overall size is 2-2/8" by 3-3/8". For larger tags, the Texas mount has a sticker area of 3-1/2" by 2-3/8"

Show your American pride with this beauty! This universal plate frame features a chrome-plated ABS outer frame & chrome-plated steel backing plate. The backing plate is drilled for universal mounting or it can be mounted in place of the stock license plate bracket on '97-'08 Road Kings (except '07-'08 FLHRSE), '98-'08 Road Glides, or '97-'08 FLHT Standards.

Fitment: universal for 4"x 7" Plates

A classy upgrade for many popular products including our Bullet Light Rear Turn Signal Bar & Custom Turn Signal Bar.

Fitment: Kuryakyn light bars #2098 & #2099 only.

We've added a horizontal version to our popular line of side mount license plate holders. The frame is grooved, beautifully chrome-plated & features flush-mount flat-head screws & a built-in L.E.D. light assembly to properly illuminate your license plate. Mounting clamps for a variety of applications are sold separately & allow the license holder to be installed on the swingarm many bikes including Dynas, Sportsters, Softails, & Rockers!

Designed to replace Harley's standard 3-bolt license plate bracket, this baby streamlines your fender by tilting the plate back. Kit includes rubber wedge so you have an option as to how far the plate lays down.

Fitment: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.) Universal for Custom Applications (Holds a 4" x 7" Plate) License Plate Frame not Included (may need to drill holes in fender)

Our chrome frame and back plate will dress up your license plate when using the stock bracket.

Fitment: 4" x 7" Plates

This chrome die-cast license plate frame incorporates two high intensity light bulbs that are wired separately. Wire one each to your brake and tail lamp circuits or together for an extra bright stop or running light.

Fitment: 4" x 7" Plates

Note: Not intended to replace OEM brake or taillight.

This small chrome display bracket mounts cleanly in any location dictated by local or state regulations. Now you don't have to mess up a nice paint job or chrome surface with some cheezy government sticker. Universal fitment.

Light up your license plate whether it's in the stock location or custom mounted with these white LED bolt lights..

Note: mounting stud is 1/4"-20

Lighted Curved Laydown License Plate with Accent Taillights leaves no chance for mistaken idenity! With its gentle curved contour & snug, fender hugging mount, this new license plate frame has a distinctive look all its own. For even more sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes. White L.E.D's provide additional plate illumination at night. A perfect complement to Panacea Taillights & Run, Turn, or Brake Controllers, this plate ties right in for all 3 functions. Designed to fit 4"x7" plates.

Note: Not intended for use with saddlebags. Please check local laws regarding side mount license plates before ordering.
Note: Bike specific mounting clamps are required for installation - Sold separately

Each License Plate Illuminator has two LED's. The white LED lights up the license plate and the rear-facing Red LED can function as an auxilary running light, turn signal or brake light for added visibility.

Note: mounting stud is 1/4"-20

Not intended to replace OEM brake or signal lights

Mount auxiliary marker lights or turn signals to your license plate and open up that saddlebag area or just streamline your rear fender. This simple system mounts directly to the back of your license plate with support backing plate and two side mount brackets. The side mount brackets have a 3/8" hole and will accept Kuryakyn Silver Bullets or L.E.D. Mini Bullets - available in the Lighting section of this website.

Note: will not work with curved frames or frames like Swept/Lone Eagle, etc.

Add this license plate helmet lock and conveniently lock your helmet to your motorcycle. The simple little mounting plate easily bolts to the back of almost any motorcycle and allows the easiest access for locking your helmet.

Fitment:
    Any H-D Model with standard 3-bolt fender mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
    Metric: '03-'09 VTX1300 Retro/S/T or '02-'08 VTX1800 Retro/S/T Models & Universal Lay Down Applications

Note: will not install with Curved License Plate Frames or Swept/Lone Eagle License Plate Frames.

The one thing most custom license plate frames have in common is they are too small to fit about half of the state’s license plates! This frame is offered in two sizes to fit 4-3/8" x 8" and 4" x 7" plates. Depending on which plate you're working with, some minor modifications may still be necessary, but this will make many installations much easier.
This great looking new frame is finished in glistening chrome, and has ball-milled accents.

Add the Curved Tip-Back License Plate Frame & smooth out the back of your fender. With 8º of angle & a curved frame, this chrome beauty holds a 4" x 7" plate & bolts directly to your stock OEM license plate mount. Works great on short bobtail fenders too!

Fitment: Bolts directly to flat stock OEM license plate mount.

Note: will not work on VT1300 Custom Line

Chrome die-cast frame with 8 red LEDs provides added safety with added visibility from behind.

Also contains 4 white LEDs for license plate number visibility. LED’s are dual functioning as running and brake lights.

Fits standard 7" x 4" plates.

Chromed plated ABS Multi Functional LED License Plate Holder for standard 7” x 4” plates.

Frame acts as a running light, brake light and turn signals.

Chrome plated ABS Dual Function Raised License Plate Holder with 8 bright red LEDs used for running and brake lights and 4 white LEDs to illuminate the license plate.

All necessary mounting hardware and electronic hook ups included.

Fits standard 7” x 4” mororcycle plates.

This attractive and functional license plate holder accommodates 7" x 4" to 8 1/2" x 4 3/8" state license plate sizes.

Die cast chrome plate and holder incorporates 3 LED light functions. The top center lens has eight LED lights and can be used as an auxiliary running or brake light. The two side amber lenses have four LED lights each and can be used as auxiliary turn signals.

Mounts to most license plate holders.

Outer frame measures 9-1/8" L x 5-1/8" H x 3/4" D 1" width border. Clear acrylic front panel to protect license plate.

Lighted Curved Laydown License Plate with Accent Taillights leaves no chance for mistaken idenity! With its gentle curved contour & snug, fender hugging mount, this new license plate frame has a distinctive look all its own. For even more sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes. White L.E.D's provide additional plate illumination at night. A perfect complement to Panacea Taillights & Run, Turn, or Brake Controllers, this plate ties right in for all 3 functions. Designed to fit 4"x7" plates.

Fitment:
   Metric: '03-'09 VTX1300 Retro/S/T or '02-'08 VTX1800 Retro/S/T Models & Universal Lay Down Applications (may require drilling holes in fender for models not listed)
   Any H-D Model with standard 3-bolt fender mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

In the past, if you wanted a cool, custom side mount license plate you paid through the nose. Our product brings the price down to reality without compromising style & function. Choose your plate then get the correct Mounting Clamps. Sized to fit 4” x 7” plates only.

Mounts are motorcycle specific and designed to work with Kuryakyn Side Mount License Plate Holders.

Fitment:
3175 - Universal for 1-1/4” diameter tubing (ea) and Yamaha Road Star without swingarm covers (ex. Warrior) & other motorcycles with 1-1/4" diameter swingarms (ea)

KU-3177 -  Yamaha Road Star (ex. Warrior) with Küryakyn Swingarm Covers (P/N 8262 & 8664)

Chome plated stainless steel state inspection tag mount.

Mounting surface measures 3-1/2" by 2-3/8"

Our streamlined Curved Laydown License Plate Mount is a major improvement over the stock "billboard" plate mount on many bikes today. The curved frame mates cleanly with the backing plate for a finished and completely custom look. Accents 4"x 7" plates.

Fits: H-D: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
Metric: '03+ VTX1300 Retro/S/T or '02-'08 VTX1800 Retro/S/T Models
Universal: universal - may require drilling holes in fender

Here’s a great universal Curved License Plate Frame for custom or stock fenders. It includes a chrome backing plate & outer frame with built-in L.E.D.’s to illuminate the license plate. It’s a great way to relocate a license plate below the taillight!

Fitment:

Universal: 4” x 7” license plates (may require drilling holes in your fender)

Metric: All '04-'08 Honda Shadow Aero 750 Models