Goodridge Brake Line for Harley-Davidsons feature chrome banjos, polished stainless tees, and your choice of hose. The part numbers listed are for stainless braided lines with clear coat.

Fitment:
FLHR, FLHR-I 94-07 front
FLHRC 99-07 rear
FLTR, FLTR-I 98-07 frint

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FLHR 94-06;  FLHRC-I 98-06;  FLHR-I 96-06;  FLHRS, FLHRS-I 04-06;  FLHS 89-95; 
FLHT 90-05;  FLHTC, FLHTC-I 89-06;  FLHTCU 89-00;  FLHTCU-I (not sidecar) 96-06;  FLHT-I 05-06; 
FLHX, FLHX-I 2006; 
FLTC, FLTCU 89-95;  FLTCU-I 96-00;  FLTR 98-02;  FLTR-I 00-06

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FLHTCU-I 98-01 Sidecar

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FLHR, FLHRC-I, FLHRS, FLHRS-I, FLHT, FLHTC, FLHTCU-I, FLHX, FLHX-I, FLTR-I 2007

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FLHP, FLHPE 10+;  FLHR, FLHRC 07+;  FLHT, FLHTC 08+;  FLHTCUG-Trike 2009;  FLHTK, FLHTP 10+;  FLHX 08+;  FLHXX 10+;  FLTR 08-09;  FLTRX 10+
TLE/FLHR, FLHRC Sidecar, TLE/FLHT, FLHTC Sidecar, TLE/FLHTCU Sidecar, TLE/FLHX Sidecar, TLE/FLTR Sidecar 2009

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHS'87-'88;  FLHT, FLHTC '84-'89
FLTC, FLTCU '84-'89

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHR '94-'95;  FLHS '90-'95;  FLHT '90-'95;  FLHTC, FLHTCU '90-'95
FLTC '90-'95

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHRS, FLHRS-I '04-'06 without cruise control

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHRP, FLHR, FLHT, FLHTC '96-'01;  FLHTCU '96-'00;  FLTR '98-'01

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHR, FLHR-I, FLHRC-I, FLHTCU-I '02-'06
FLHT, FLHTC 2002
FLTR-I '02-'06

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHRC-I '98-'99;  FLHTC, FLHTCU-I (not sidecar) '96-'01;  FLTCU-I '96-'00;  FLTR-I '00-'01

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHT-I '05-'06:  FLHTC '03-'06:  FLHTC-I '02-'06:  FLHX, FLHX-I 2006

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLTR 2002;  FLHT '03-'05

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHR-I '96-'01;  FLHRC-I '00-'01;  FLHTCU-I sidecar '98-'01
FLTR '98-'99

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHR-I '96-'01;  FLHRC-I '00-'01;  FLHTCU-I sidecar '98-'01
FLTR '98-'99

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FL MODELS with 4-speed '81-'84
FLHT, FLHTC '83
FLT '82-'83;  FLTC '82-'83

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHT, FLHTC, FLHTCU-I, FLHX, FLHX-I, FLTR-I 2007

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHR, FLHRP  '96-'01
FLHT, FLHTC '96-'01
FLHTCU '96-'00
FLTR '98-'01

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: (not for cruise control models)
FLHTC '02-'06;  FLHTC-I '02-'06;  FLHT-I '05-'06

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: (with cruise control)
FLHR '02-'07;  FLHRC-I 2007;  FLHT, FLHTC 2002

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: (with cruise control)
FLHT '03-'05;  FLHTC '03-'06;  FLHT-I '05-'06

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHR-I, FLHRC-I '02-'06
FLTCU-I '02-'06;  FLHTC-SE '04-'05
FLTR-I '02-'06

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHTC-I '02-'06
FLHX, FLHX-I 2006

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHTCU '90-'95

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLTRI '98-'99

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHRC-I '98-'99;  FLHTC-I, FLHTCU-I '96-'01;  FLTR-I '00-'01

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLHRS, FLHRS-I '04-'07 with cruise control

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLTR 2002

Installing taller handlebars on your 2008-09 HD Bagger and need to extend the throttle-by-wire? We have you covered! These plug and play extensions make installation easy! It’s that simple. No individual wires to mess with and no soldering or modifications required.

Available in lengths of 8”, 12”, and 15” and can also be combined for applications requiring extra length.

NOTE: Does not fit Screaming Eagle models.

Fitment: HD FL models (not SE) 2008+