These baffles will only work with the Complete BUB "7" true duals.
They will not work with the BUB "7" standard slip-on mufflers with a 1 3/4 inch inlet.
These baffles will reduce the sound level around 6 decibels.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

• The system utilizes performance-proven stepped header technology running from 1 3/4 inches to 2 inches.

• The system without cross-over balance tube provides increased mid-range and top-end performance.

• The headers are covered by 2 1/2" heat shields with the BUB 7 logo precisely die-stamped into rear heat shield.

• 3 1/2" mufflers run the length of the bags and finish with unique adjustable slash-cut outlets; slash can be fixed in the upward or downward position.

• Specially designed, Dyno proven baffles, increase performance and give the system a deep aggressive tone without objectionable noise.

• The system comes standard with dual 02 sensor ports.

• All BUB 7 True Dual systems are built to BUB’s highest quality and performance standards.

• Fits- 2007 to 2008 Harley Davidson ( FLHR, FLHRC, FLHRS, FLHT, FLHTC, FLHTCH, FLHX, FLR )

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

 

.

BUB 7 Stealth True Dual Exhaust Systems represent the finest quality in *EPA compliant sound reduction exhaust systems. Designed and tested by BUB Engineers, Stealth True Dual Exhaust systems have a level and quality of sound that will keep you riding all day. Neither too loud nor too quiet, BUB’s Stealth True Dual Exhausts provide the perfect balance of 50 state legal sound, outstanding performance and the tonal sound quality that you would expect on a Milwaukee V Twin with BUB 7 product installed.

• BUB 7 True Dual exhaust systems utilize performance-proven stepped header technology running from 1 ¾ inches to 2 inches.

• Specially designed, Dyno proven baffles, increase performance and give the system a deep aggressive tone with 50 State Legal Sound.

• The headers are covered by 2 1/4" heat shields with the BUB 7 logo precisely die-stamped into rear heat shield.

• 4" mufflers run the length of the bags and finish with unique adjustable slash-cut outlets. The slash can be fixed in the upward or downward position.

• The system comes standard with Dual 02 sensor ports.

• All BUB 7 systems are built to BUB’s highest quality and performance standards.

What our customers are saying about the new BUB 7 Stealth True Dual Exhaust System.
"I want to thank you for helping me get the new mufflers "straight out of the oven". My pipes arrived on a Wednesday, I had them installed on Friday, and my wife and I left on a tour of Nova Scotia and Prince Edward Island from Michigan four days later.

The pipes perform great - a demonstrable increase in power and better gas mileage. They look great and with the "true dual" feature, my wife's leg (passenger) is no longer getting fried by the engine exhaust heat.

Again, thanks....I'm well pleased."

Mike

• BUB 7 True Dual exhaust systems utilize performance-proven stepped header technology running from 1 ¾ inches to 2 inches.

• Specially designed, Dyno proven baffles, increase performance and give the system a deep aggressive tone without objectionable noise.

• The headers are covered by 2 1/4" heat shields with the BUB 7 logo precisely die-stamped into rear heat shield.

• 3 1/2" mufflers run the length of the bags and finish with unique adjustable slash-cut outlets. The slash can be fixed in the upward or downward position.

• The system comes standard with Dual 02 sensor ports.

• All BUB 7 systems are built to BUB’s highest quality and performance standards.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

 

.

• The system has no cross over to tame the performance or sound.

• The sound is deep and throaty, but mellow enough for long cruises.

• These headers will cut the weight of your stock headers in half.

• They come standard with 2 1/4 heat shields.

• Headers comes standard with dual 02 sensor ports.

• Stock mufflers will fit these headers or we have a range of BUB slip-on mufflers to choose from.

• All BUB systems are built to BUB’s highest quality and performance standards.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

 

.

• Scalloped cut mufflers give a look that will work with classic or modern motorcycle styling.

• The exceptional chrome finish is complemented by the subtle laser engraved BUB logo.

• Removable baffles can be replaced with an optional sound reducing baffle.

• Deep aggressive tone and performance that matches more expensive slip-ons.

• Will also work on the Tri Glide model.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

BUB M23 Slip-on Mufflers for the 1995+ Harley Davidson FL Touring Models

• Will also work on the Tri Glide model.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

• The system utilizes performance-proven stepped header technology running from 1 3/4 inches to 2 inches.

• The system without cross-over balance tube provides increased mid-range and top-end performance.

• The headers are covered by 2 1/2" heat shields with the BUB 7 logo precisely die-stamped into rear heat shield.

• 3 1/2" mufflers run the length of the bags and finish with unique adjustable slash-cut outlets; slash can be fixed in the upward or downward position.

• Specially designed, Dyno proven baffles, increase performance and give the system a deep aggressive tone without objectionable noise.

• The system comes standard with dual 02 sensor ports.

• All BUB 7 True Dual systems are built to BUB’s highest quality and performance standards.

• Fits- 2007 to 2008 Harley Davidson ( FLHR, FLHRC, FLHRS, FLHT, FLHTC, FLHTCH, FLHX, FLR )

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

 

.

• One-piece muffler housings with tapered inlets for easy installation.

• The mufflers have 3 1/2" muffler bodies with slash-cut aluminum end caps that align perfectly to the rear end of the saddlebags.

• The slash-cut can be positioned in the upward or downward position.

• These slip-on mufflers offer impressive mid-range and top end performance.

• Produces a deep aggressive sound.

• Will also work on the Tri Glide model.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

This system features:

• Miter-cut 1 3/4" headers that merge into a 2 1/2" collector.

• Dual 02 sensor ports.

• The headers are covered by 2 1/2" heat shields with the BUB 7 logo precisely die-stamped into the rear heat shield.

• The muffler starts at 2 1/2" and ends at a fat 4 1/2" with a slash-cut billet aluminum end cap.

• The muffler can be installed with slash-cut in the upwards or downwards position.

• This system utilizes reverse cone tuning technology for exceptional mid-range and top-end performance.

• The system emits deep, aggressive tone without objectionable noise.

• Fits- 2009 ( FLHR, FLHRC, FLHRS, FLHT, FLHTC, FLHTCH, FLHX, FLR )

• All BUB 7 systems are built to BUB’s highest quality and performance standards.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

 

.

BUB 7 Stealth Mufflers represent the finest quality in EPA compliant sound reduction mufflers.

Designed and tested by BUB Engineers, Stealth Mufflers have a level and quality of sound that will keep you riding all day.

Neither too loud nor too quiet, BUB’s Stealth Mufflers provide the perfect balance of 50 state legal sound, outstanding performance and the tonal sound quality that you would expect on a Milwaukee V Twin with BUB 7 product installed.

Will also work on the Tri Glide model.

What our Customers are saying about the New BUB 7 Stealth Mufflers:
"Now that I have a few miles with the new pipes I thought I would drop a note. I am very happy with the finished product. When I roll on at 2800 RPM's it sounds like a Harley and at lower RPM's it is much quieter than what I had. (Rineharts) I have recommended the pipes to many others.   Thank you for all you do!"

Fitment: 
7039 is for 95+ HD FL Models with all BUB 7 and/or other 2 inch True Dual headers (WILL NOT WORK WITH STOCK HEADERS!)
7038 is for 95+ HD FL Models with stock headers or 1.75" headers

The BUB 7 FL TDX systems represent the most advanced exhaust systems available for Harley Davidson Touring models. With the mixture of stepped headers and crossover technology, BUB has created exhaust systems with exceptional power and torque throughout the power band.

The BUB 7 FL TDX headers follow a similar path to the stock motorcycle exhaust and help to minimize the heat around the rider and passengers legs. The Crossover is covered by a stylish BUB 7 badge shield that minimizes the visual impact and gives the appearance of two individual pipes running parallel.

The TDX headers come with standard 3.5” OD BUB 7 True Dual mufflers. The mufflers allow for two mounting positions with the slash pointed up or down depending on preference. The mounting can be changed after installation for a different look.   

Comes with dual O2 ports.

Note: Requires new OEM exhaust port gaskets before system installation.

From the exceptional finish options, outstanding performance, industry leading quality, and supreme styling, the BUB 7 TDX systems will not disappoint.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

The BUB 7 FL TDX systems represent the most advanced exhaust systems available for Harley Davidson Touring models. With the mixture of stepped headers and crossover technology, BUB has created exhaust systems with exceptional power and torque throughout the power band.

The BUB 7 FL TDX headers follow a similar path to the stock motorcycle exhaust and help to minimize the heat around the rider and passengers legs. The crossover is covered by a stylish BUB 7 badge shield that minimizes the visual impact and gives the appearance of two individual pipes running parallel.

The BUB7 Stealth mufflers allow for two mounting positions with the slash pointed up or down depending on preference. The mounting can be changed after installation for a different look.

Comes with dual O2 ports.

Note: Requires new OEM exhaust port gaskets before system installation.

From the exceptional finish options, outstanding performance, industry leading quality, and supreme styling, the BUB 7 TDX systems will not disappoint.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

 

.

• BUB 7 True Dual exhaust systems utilize performance-proven stepped header technology running from 1 ¾ inches to 2 inches.

• Specially designed, Dyno proven baffles, increase performance and give the system a deep aggressive tone without objectionable noise.

• The headers are covered by 2 1/4" heat shields with the BUB 7 logo precisely die-stamped into rear heat shield.

• 3 1/2" mufflers run the length of the bags with the unique adjustable slash cut design. The slash cut mufflers can be fixed in the upward or downward position.

• The system comes standard with Dual 02 sensor ports.

• All BUB 7 systems are built to BUB’s highest quality and performance standards.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

 

.

• BUB 7 True Dual exhaust systems with stealth mufflers utilize performance-proven stepped header technology running from 1 ¾ inches to 2 inches.

• Specially designed, Dyno proven baffles, increase performance and give the system a deep aggressive tone without objectionable noise.

• The headers are covered by 2 1/4" heat shields with the BUB 7 logo precisely die-stamped into rear heat shield.

• 4" mufflers run the length of the bags with the unique adjustable slash cut design. The slash cut mufflers can be fixed in the upward or downward position.

• The system comes standard with Dual 02 sensor ports.

• All BUB 7 systems are built to BUB’s highest quality and performance standards.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

 

.

The BUB 7 FL 2-1 slip-on muffler was designed to give owners of 2010 Street Glides or Road Glide Customs the affordability of a slip-on muffler, for their stock 2-1 system, with an excellent performance gain.

The BUB 7 FL 2-1 slip-on muffler using common 7 muffler technology that allows the muffler to be mounted with the slash up or down. This can be changed as desired to transform the look of your bike.

This Slip-on Mufflers fit 2010 Harley Davidson Street Glide and Road Glide Custom models with a stock 2-1 header.

BUB Boom Can slip-on mufflers are the perfect answer for some of today’s bag extensions!

The 6 inch diameter of the muffler outlets are a perfect match to the opening in the bags.

BUB Boom Can mufflers provide excellent performance, awesome sound and just the right look with today’s larger saddle bags.

Kit for blocking off the O2 sensor ports on HD exhaust systems - will NOT work on metric models.

NOTE: This product is designed for use on closed course competition motorcycles only and does not conform to U.S. EPA and/or CARB emission standards. Use on motorcycles subject to EPA and/or CARB regulations constitutes tampering and is a violation of Federal/ local law unless it can be shown that such use does not cause the motorcycle to exceed applicable Federal/ CARB standards. This product is designed for use on motorcycles with non-catalyzed exhaust and/or emissions systems.  Due to gaps in reporting, and limited access to catalyst exhaust application information on certain Harley Davidson Motorcycles, BUB Enterprises is unable to provide a comprehensive list of motorcycles with catalyzed exhaust and/or emissions systems.   Be advised that replacing a catalyzed exhaust system with a non-catalyzed exhaust system is against federal and state laws.  Therefore, prior to purchasing this BUB exhaust system and/or muffler set, it is imperative that you check with an authorized Harley Davidson dealer to ensure the OEM motorcycle exhaust system does not/did not contain a catalytic converter.

Need to tone it down a bit?  These baffles are made for Rinehart, Stubbies and Chambermaid pipes by Bub

Replacement springs for Heat Shields - pack of 8