Introducing the first, truly multipurpose backrest & luggage rack system only available from Küryakyn. Once installed, no tools are needed for adjustments making the switch from rider to passenger backrest a snap. Full adjust-ability will help you enjoy those longer rides & with the incorporated luggage rack, carrying all your stuff just got a whole lot easier.

• Truly multi-purpose – provides driver or passenger backrest along with a convenient luggage rack that can be used in either position.
• Sturdy aluminum main frame, steel folding luggage rack with rubber inserts, & comfortably padded backrest.
• Extremely versatile – backrest converts from driver to passenger without tools in seconds.
• Backrest pad is fully adjustable via stainless sliding rods with push-button locks & knurled threaded knobs.

Backrest & Mount Plates sold separately. You must order the Back rest #1660 and then order the appropriate Mount kit for your model bike!

Note: use Fixed low mounts for seat less than 6" thick (measured at front of passenger seat)

1665 is compatible with stock seats on '09-'10 FLHX, '09 FLTR, '10 FLTRX, and '09-'12 FLHRC
1666 is compatible with stock seats on '09-'12 FLHR, '09 FLHT Standard, '11-'12 FLHX, '11-'12 FLTRX.

If you liked our chrome ISO-Grips then you’ll love our new Black ISO-Grips. These powder-coated black grips dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort. Get total comfort with our matching throttle bosses. These grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO� pads permit air movement for added comfort in hot weather. The knurled accent ring adds a touch of class. All grips are sold in pairs. Add the ISO Throttle BOSS for more comfort! Accent rings are available in several colors to match your bike paint theme. The removable end caps allow access to handlebar air reservoir fittings.

6320 will fit all Harley-Davidson (H-D) models with dual cable throttle control.
6321 is for models with electronic throttle control (TBW) 2008+ Electra Glide, Road King, Road Glide, Street Glide and Trikes

Introducing a billet antenna that’s made for people who actually ride. No more bent or broken antenna studs thanks to the rubber over-molded spring base allowing the antenna to flex if bumped or hit. These 12” antennas pick up AM/FM signals (no CB) & are a direct replacement for OEM. Available in chrome or two tone finishes; install in just seconds.

Fitment: ’89-’12 Electra Glides, Road Glides, Street Glides, Tour Glides & Trikes – AM/FM applications only

It's time to finish the job with our Chrome Throttle and Idle Cable Covers.  Quick and easy installation - Requires no disassembly of your controls or cables.

Fitment: All '82+ Models with 90 Degree Cable Elbows

As tasteful as an Oscar, this beautifully sculpted set of levers adds a really unique accent to any bike. They are also very comfortable on the hands.

1024 Fits: '82-'95 H-D Models

1019 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1049 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra/Road/Street Glides, Trikes, & Road Kings)
When 1049 is installed on an '08 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1055 Fits: '08+ Electra Glide, Road Glide, Street Glide, Dressers, Trikes, & Road Kings with Cable Operated Clutch

Kuryakyns's new ISO�-Flame Grips have a unique flamed pattern in the soft and cushy rubber pads. Finished off with a Maltese Cross emblazoned end cap and trim ring for that additional bad attitude look. This grip accepts the wildly popular ISO-Throttle boss, which greatly aids your hand on those long rides to the next rally. Sold in Pairs

Fitment:
6269 fits: 08+HD models with electronic throttle control (Glides, Road King, Trikes)
6260 fits: "82+ HD models with dual cable throttle

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

The look is purely wicked, but they look & feel is so cool! Smooth chrome bodies with vibration absorbing rubber inserts assure a comfortable & secure grip to keep control in hand. Zombie end caps enhance the specter of evil as the numbers of this coven of accessories continue to multiply. Zombie Throttle Boss included or sold separately - fits right side only.

It's no secret - most top designers in any field would concur. The keys to good looks are keeping it simple & highlighting the contours. Regardless of the color or finish, chrome goes with anything & these elemental accents will add depth & character to the time-honored Bat-wing fairing. Bat Lashes require no tools & no drilling. Simply clean the surface, peel, stick & admire! Lighted Bat Lashes are also surface mount but require drilling to route wiring.

Fitment: 96+ Electra Glides, Street Glides, H-D Trikes, AirMaster fairings (and other fairings of that style)

Enjoy those longer rides & relax your throttle hand with the Mechanical Throttle Assist. This is the simplest & cleanest looking throttle position holder available. Attaching to the end of your handlebars, this beauty looks like a bar end weight. Simply hold the throttle at desired location & roll your little finger back to hold your throttle in position. The spring loaded tensioner makes it easy to set without over tightening for easy throttle shut down when needed. Add the left side for a bar end weight matched pair & ride on in comfort.

For OEM Grips & All ISO®-Grips & ISO®-Flame Grips with 7/8" or 1" handlebars. All H-D Models with 1" or 7/8" handlebars with hollow bar ends & OEM or Küryakyn ISO- & Transformer style grips (except '08-'09 Touring Models with electronic throttle, heated grips or air reservoirs in handlebars). NOT compatible with Kuryakyn Chrome style throttle bosses that screw to the end of Kuryakyn grips or other grip end accessories/weights. Note: Proper installation may require cutting or drilling a 5/8" hole in the end of the OEM grips.

Fitment:
6285 and 6288 -
      Honda: VTX1300/1800, VT1300 Custom Line (Sabre, Stateline, Interstate), VT 750/1100, VLX, Magna, Valkyrie and ST100/1300
      Kawasaki: Vulcan 900, 1600 Classic & Mean Streak. Following can not use 6288 - Vulcan 800/1500 Classic/Drifter/Nomad/Mean Streak, Nomad 1600
      Suzuki: Intruder 1500LC/C90, Volusia/C50, Marauder 800/M50, S50, Intruder 1400/S83
      Yamaha: V-Star 650 Custom & Classic
      Victory: All Kingpin, Hammer and Vegas (all models) with Kuryakyn Grips
      Universal: all models with 7/8" or 1" hollow bars with open ends (ID 5/8" or greater)

Boss Blades are a stunning addition to our line of custom levers. Their wide, deeply dished blades greet your fingers with the shortest reach possible while still allowing the necessary range of motion. Their sculpted surfaces and chiseled ends scream Who’s Boss.

The 1080 (adjustable) relocates the cable anchor point to allow the lever to be adjusted closer to the handlebar (up to 3.4" at the tip) without affecting clutch actuation.

1036 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1038 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)
When 1038 is installed on an '08-'09 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1057 Fits: '08+ Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

1080 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)

Note: Installer is responsible for ensuring proper clutch disengagement when levers are installed. Clutch and clutch cable must be correctly adjusted and installer must verify grip diameter does not adversely affect clutch operation.

Fitment:
6229 fits: 08+HD models with electronic throttle control (Glides, Road King, Trikes)
6203 fits: "82+ HD models with dual cable throttle

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

These are the finest levers on the market today. You see, your forefinger is your strongest finger. But, other levers won't let your strongest fingers work. Kuryakyn levers allow the forefinger to get a real grip, making it much more comfortable and easier to pull the lever. Add to that the dished out backside of the levers, which Barnett invented twenty-some years ago, and you've got the best set of levers you'll ever own. Your hands just fall naturally into place. If you've got small hands, these are a must.

1021 Fits: '82-'95 H-D Models

1029 Fits: ’96-’11 H-D Models with Cable Operated Clutch (except ’04-’11 Sportsters & ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes)
When 1029 is installed on an '08+ Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1056 Fits: ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

It's hard to imagine any piece of cool metal feeling better in your hand. Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.

6291 Fits: '82+ H-D Models with dual cable throttle control

6293 Fits: '08+ H-D Models with electronic throttle control (Electra Glides, Road Kings, Road Glides, Street Glides, Trikes)

We tested many of our competitor's forward facing air cleaners & found them to be very restrictive. We designed many prototypes until we settled on this very aggressive, free flowing, trulyhigh-performance unit.The chrome-plated,die-cast housing with high-flow element, supplied by Advanced Flow Engineering (aFe), is easy to install & air-flow will support performance engines in excess of 100 H.P.

Note: These kits contain an all-chrome Corsair Air Cleaner, mounting kit & Jets (if needed) necessary for a complete, sanitary installation. For optimum performance & driveability on fuel injected motorcycles, we strongly recommend use of a Fuel Injection Controller like Fi2000, Wild Fire, Dynatek, etc. We recommend that the air cleaner installation & jet/FI adjustments be performed by a qualified technician.

Note: Not compatible with fairing lowers equipped with glove boxes.
Note: Installation of this air cleaner may decrease rider leg room. Please reference dimensions provided and determine if installation will adversely affect safe and comfortable operation of the motorcycle before making your purchase. This is especially important for riders with shorter legs.

Fits:
Universal peel-&-stick applications - Requires a 4-1/2” diameter flat surface
H-D - Used as speaker grills on all '96+ Electra Glides, Street Glides, & Trikes
Air Cleaners: Kuryakyn Hi-Five Mach 2 Air Cleaner Assemblies
Yamaha: 
    06+ Roadliner & Stratoliner
    08+ Raider Left Tranny Cover & Front Drive Hub Cover
    07+ V-Star 1300 & 09+ V-Star 950 Front Drive Hub Cover Only

Easily affixes to the speedometer. Besides the sleek appearance, you'll really appreciate the reduction in glare if you run a windshield!

Fitment:
   4015:
       H-D:  Fits perfectly on Road Glides, ‘04-’10 Sportster Customs, & many other bikes
   Metric:
       Honda: '02-'06 VTX1800C, 250 Rebel,  Shadow 1100 with Round Speedo on handlebars measuring 3-3/4"
     Victory: All '04-'11 Models (Jackpot, Kingpin, Vegas, Hammer) with digital gauge (except Vision)
   Universal: Speedometers & tachometers 3-3/4" diameter with 7/16" of exposed bezel/sidewall

   4016 Fits: Speedometers & tachometers 3-1/4" diameter with 1/8" of exposed bezel/sidewall

Transform The Right Side of Your Awesome Twin Cam Engine with These Easy to Install, Luxurious Covers. Available For All Bikes Equipped With Stock Head Pipes or Aftermarket True Dual Pipes.

Note: 8654 & 7877 will also fit 09+ Touring models with Kuryakyn or V&H True Dual Head Pipes where the rear head pipe is routed in the same manner as the stock rear head pipe.

These premium quality accessories quickly & easily allow you to remove the heel shift lever on Dressers, Road Kings, or any FLST Model. Unique design keeps the shift shaft in perfect alignment to avoid premature shaft wear, a problem common to similar products. The Delrin lining eliminates rattles & keeps your bike shifting as smoothly as ever.

Stylize those unsightly front and rear reflectors on your bike with our louvered chrome covers. Leaves them on your bike for heightened visibility but adds a stylized louvered cover in traditional Kuryakyn shiny chrome.

Fits: Front, All VTX 1800, All 1100 Spirit (front and rear), all 750 Spirit, all Shadow VLX 600, VT1300 Custom Line, Front Downtubes: All ’92-’08 H-D Touring Models (Electra Glides, Road Kings, etc.), all ’91-’99 Softail Models, & all ’91-’99 Sportster Models and other motorcycles with reflectors that are 3-5/16" by 1-1/4" or smaller with 1/4" of clearance around the reflector.

Beast Oval Mufflers maximize the horsepower potential of your bike while providing a mellow, deep tone! Beast Ovals make great sound without waking the neighbors or drowning out your bike’s stereo. Large volume & innovative baffle design lay waste to the theory that loud pipes make more power. Bluing or discoloration won’t be a problem - these new mufflers are shrouded with formed heat shields.

Fitment Note: ’95-’12 Electra Glides, Road Glides (except ’09 FLTRSE & '12 FLTRXSE), Street Glides (except ‘10-'12 FLHXSE), Tour Glides, & Road Kings. Installation on ’10 FLHX or FLTRX requires conversion to True Dual or Crusher Dual Head Pipes.

Note:  Küryakyn makes no warranty regarding discoloration of chrome exhaust products. Discoloration is a result of heat & is not a manufacturing defect.

Emissions Note: Kuryakyn exhaust systems for non-catalyst equipped motorcycles as well as slip-fit mufflers that mount downstream of catalysts is considered legal replacement parts in California. California does not, however, permit the use of aftermarket exhaust systems that remove original equipment catalysts unless a California Air Resources Board (CARB) Executive Order has been issued. If you have any questions on sound and emissions regulations, please check with your local laws and regulations. Some Fuel management systems are not legal for street use in California. For systems legal for street use in California, please refer to CARB E.O. No. D-632.

We’ve combined performance, sound & great looks into one package. With Crusher True Duals, each cylinder breathes through its own head pipe & muffler, greatly improving flow & making the bike much easier to tune. Power is increased as heat is reduced. ’95-’08 left side pipes tuck in close for passenger comfort. Crusher True Duals for ’09 & ’10 bikes runs the left pipe beneath the motorcycle; well away from the passenger’s feet & legs.

Crusher True Duals include heat shields & mounting hardware. All that’s left to do is choose the mufflers to complete your high-performance package – Crushers or Beast Ovals! Fit Road/Electra/Street/Tour Glides, Road Kings,

Emissions Note: Kuryakyn exhaust systems for non-catalyst equipped motorcycles as well as slip-fit mufflers that mount downstream of catalysts is considered legal replacement parts in California. California does not, however, permit the use of aftermarket exhaust systems that remove original equipment catalysts unless a California Air Resources Board (CARB) Executive Order has been issued. If you have any questions on sound and emissions regulations, please check with your local laws and regulations. Some Fuel management systems are not legal for street use in California. For systems legal for street use in California, please refer to CARB E.O. No. D-632.

The Crusher name has become synonymous with performance. Performance throughout the RPM range! Looks to die for & quality only Küryakyn can bring you. Crusher Mufflers are acoustically tuned for that deep low rumble you will love - they provide lower decibel levels at cruising speeds & an authoritative growl at wide open throttle. High tech stainless steel packing provides added longevity!

Fitment Notes:
498 is for 95-’08 Road/Street/Tour Glides, & Road Kings, & '09-'12 Models with Short Shocks, & all Trikes
490 is for 95+ Electra/Road/Street Glides, & Road Kings,  Installation on ’10 FLHX or FLTRX requires conversion to True Dual or Crusher Dual Head Pipes.
491 is for 95+ Electra/Road/Street Glides, & Road Kings,  Installation on ’10 FLHX or FLTRX requires conversion to True Dual or Crusher Dual Head Pipes.

Note:  Küryakyn makes no warranty regarding discoloration of chrome exhaust products. Discoloration is a result of heat & is not a manufacturing defect.

Emissions Note: Kuryakyn exhaust systems for non-catalyst equipped motorcycles as well as slip-fit mufflers that mount downstream of catalysts is considered legal replacement parts in California. California does not, however, permit the use of aftermarket exhaust systems that remove original equipment catalysts unless a California Air Resources Board (CARB) Executive Order has been issued. If you have any questions on sound and emissions regulations, please check with your local laws and regulations. Some Fuel management systems are not legal for street use in California. For systems legal for street use in California, please refer to CARB E.O. No. D-632.

Fly your flag without worrying it will fly off your bike. Machined from aluminum, the sturdy mount is easy to install.

A single bolt tightens the two clamp halves around the chrome Saddle Bag Guard that comes standard on the FLHTC, FLHTCU & FLHTK.

The flag mount is also compatible with Road King, Road Glide & FLHT Standard if H-D’s chrome Saddle Bag Guard kit is installed.

All flags are 9”x 14”. Includes 12” & 18” Staff, American, P.O.W. & Crossbones Flags.

All day long, all they see are the bottoms of your boots. But when you’re standing around with the crowd looking at  bikes, that’s when your Floorboard Covers strut their stuff. Standing out without being pushy, the chromed inlays play nice with the rest of the Küryakyn bling that makes your  bike unique. Direct replacements for the stock floorboard covers, the assemblies sit on top of the stock steel base plates so no comfort is compromised & the raised rubber edge keeps your boot heels off the pipes. Now available to match our most popular themes!

Tech Tip:When installing any footpeg, footboard or highway peg combination, always verify all fasteners are tight and secure - even those you don't adjust. We also recommend periodically checking to make sure all fasteners remain tight.

Driver Board Inserts Fitment:   Traditional Boards -‘84-‘10 Electra Glides (except ‘04-‘05 FLHTCSE & ‘06-‘10 FLHTCUSE), ‘84-‘96 Tour Glides, ‘98-’09 Road Glides (except ‘09 FLTRSE), ‘94-‘10 Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08 FLHRSE), All ’09-’10 Trikes & all ‘86-‘08 FLST/FLSTC, ’90-’10 FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC. (pr)

Passenger Board Inserts Fitment:  ’86-’10 Electra Glides, Road Glides, Tour Glides, Road Kings, & Trikes with Traditional D-Shape Passenger Floorboards, also all ’86-’10 Softail Models equipped with H-D accessory Passenger Floorboard Kits using raditional D-Shape Floorboards. (pr)

Theanswer to more leg room on floorboard equipped H-D Models! Levers move the location of the brake pedal pad forward & down while flattening the angle of the pad. Now your foot is no longer “under” the brake pedal, resulting in easier & more natural braking. All levers are beautifully polished & chrome-plated steel. They have a bronze bushing with a grease fitting for smooth operation & long life.  Note: on ‘02-later models, the extended brake pedals provide only slightly more extension then stock, but the brake pedal pad is slightly lower and flatter, making the transition from board to brake more natural.

1027 fits: '97-'07 Electra Glides, Road Glides, Street Glides, Road Kings; & '87+ FLST Models

1070 fits: '08+ Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

1071 fits: '08+ Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

9081 fits: '97-'07 Electra Glides, Road Glides, Street Glides, Road Kings; & '87+ FLST Models

This footpeg mount allows one to fine tune their riding position. Measuring 4-1/2” long with a 1-1/4” offset, the rider may now increase or decrease the reach to the highway peg. The X-Tension mounts with a 1/2”-13 bolt & may be used on OEM highway peg mounts, some forward control plates, with Magnum Quick Clamps, etc. It will accept any H-D style male mount footpeg.

4501 Fits:
H-D: X-Tension with Dually & 1-1/4" Magnum QuickClamp (pr)
Metric: All ‘99+ RoadStar 1600/1700, ‘02-’09 Warrior, ‘99-’09 V-Star 1100, '09+ V-Star 950, All V-Star 650, ‘08+ Raider (Requires 1-1/4” of available round space on both front frame tubes)

4515 Fits:
H-D: Mount with a 1/2"-13 bolt and may be used with OEM highway peg mounts, some forward control plates or with Magnum Quick Clamps.
Metric: Yamaha V-Star 1100/650, Road Star with 1-1/4" clamps or with Magnum Quick Clamps.

Note: Requires Male Mount Pegs. Not suggested for use with full size engine guards.

Installing this kit moves your stock driver boards outward 3/4 of an inch. It doesn’t sound like much, but it really makes a big difference. You don’t have to hug the gas tank with your thighs to get your foot fully on the board. They also help to alleviate some of the heat build-up by allowing the hot air to get out between your leg and the bike. All bolts are stainless and the spacers are powder coated black for durability. Running Board Extenders are compatible with fairing lowers & now offered for '09-'12 Touring Models.

Note: Not compatible with Chrome Display Stand, H-D part number 99002-97.

A classy upgrade for many popular products including our Bullet Light Rear Turn Signal Bar & Custom Turn Signal Bar.

Fitment: Kuryakyn light bars #2098 & #2099 only.

Lighted Curved Laydown License Plate with Accent Taillights leaves no chance for mistaken idenity! With its gentle curved contour & snug, fender hugging mount, this new license plate frame has a distinctive look all its own. For even more sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes. White L.E.D's provide additional plate illumination at night. A perfect complement to Panacea Taillights & Run, Turn, or Brake Controllers, this plate ties right in for all 3 functions. Designed to fit 4"x7" plates.

Fitment:
   Metric: '03-'09 VTX1300 Retro/S/T or '02-'08 VTX1800 Retro/S/T Models & Universal Lay Down Applications (may require drilling holes in fender for models not listed)
   Any H-D Model with standard 3-bolt fender mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

Even the Moonshiners would be jealous of this brackrest with hidden fold-down luggage rack. The sweeping oval bars with matching contoured pad flows with the lines of your bike. Literally fold down the inconspicuous luggage rack right out of the backrest when needed, & hide it away securely with the integrated thumb nut when you don't. Your passenger is happy, you can always bring your things, & your bike looks awesome. Mounts directly to the required Küryakyn Quick Detach Side Straps & you'll have everything you need. This is a must have. Kuryakyn Motorcycle Specific Quick Release Side Plates for Transformer Backrest must be used. They are compatible with H-D Detachable Docking Kits if the bike is so equipped.

Note: Backrest, quick release side plates and attachments kits are sold separately. You will need one of each!

Fitment notes:
Touring = Electra Glide Standards, Road Glides, Street Glides and Road King

1634 is compatible with H-D Docking Kit  54030-09
1636 is compatible with H-D Docking Kit  53803-06
1638 is compatible with H-D Docking Kit  53544-04 or 53529-04
1640, 1641 & 1644 are compatible with H-D Docking Kits 53824-00, 53932-03, 53821-00, 53930-03, 53822-00, 53931-03, 53009-03, or 53075-03

Here’s a great setup that will allow you to replace your large, stock rear turn signals with these streamlined, bullet shaped turn signals & relocate your license plate below the taillight. There is a built-in light to illuminate the relocated license plate. The bullet shaped turn signals are single circuit & come equipped with our stylish deep-dish bezels with red lenses. A flat license plate support is included but an optional Curved License Plate frame is available separately (P/N 3162). Bullet Styler L.E.D. inserts sold separately.

Fits: ’91+ Electra Glides, Tour Glides, Road Kings; ’98-’08  Road Glides, & ‘86+ FLST/C/N

Universal - may require minor modifications to work.

The Küryakyn streamlined Custom Turn Signal Bar is dramatically different than other custom turn signal bars. Not only is it sleeker, you ditch the bulbous stock turn signals & replace them with small L.E.D. Silver Bullets (P/N 1650), sold separately. A flat license plate support is included, but a trick Curved Frame (P/N 3162) adds an even more impressive look.

Fits:  '91+ Electra Glides, Tour Glides, Road Kings, ’86+ FLST/C/N

Universal for custom application - may require minor modifications

Fitment: 
- Kuryakyn 5011
- HD: 00+ H-D models with Buillet Turn Signals

We can give you the extra light you want with our straight forward plug-in L.E.D. Taillight & Turn Signal Conversions. The L.E.D. Circuit Boards are mounted inside our Stylized Lenses so all you do is take off your stock lens , remove the bulb, plug our connector into the socket & install our Lens .FMVSS #108 Compliant

Fitment:
5442 and 5443 fit Kuryakyn part numbers: 5001, 5009 and 5011)
5446 and 5447 fit Kuryakyn part numbers: 9197 and 5032)
’05+ FLSTN, ’08+ FLSTSB, ’02+ FLSTF, '10-+ FLSTFB, ’06 FLST, ’05-’07 FLSTSC, ’02-’03 FLSTS, ’05-’06 FLSTFSE, '10+ FLSTSE,
’00-’07 FXSTD, ’02-’08 FXST, ’02-’09 FXSTB, ’02-’06 FXSTS, ’07-+ FXSTC, '08+ FXCW/C, ’07-’09 FXSTSSE, ’03-’04 FXSTDSE,
’06+ FLHX, ’04-’09 FLTR, '10+ FLTRX, '11+ FLTRU, ’04-’07 FLHRS, ’09+ FLHTCUTG, '10+ FLHXXX, ’09 FLTRSE, '10+ FLHXSE, ’06+ FLHTCUSE, '11+ FLTRUSE, ’04-’05 FLHTCSE, ’02-’03 & ’07-’08 FLHRSE,
’01 FXDX/T & All ’02+ Dyna Models,
 All ’02+ XL

Give your Electra Glide or Street Glide an entirely new look!  This new Aerodynamic Windshield has an unmistakable look & inproves wind protection at the same time.  Short windshields definitly look cool, but the buffering & wind noise can be annoying.  Our design features a sweptback profile, a wedge-shaped raised center section, & a slightly flipped trailing edge.

Fits:  ’96-’10 Electra Glides, Street Glides, & Trikes; Küryakyn Airmaster Fairing & Sportech Detachable Fairing Plus

Küryakyn has teamed up with some of the best names in the business to bring you more!  Our new fairing has not just caught up with, but is ahead of its time.  While not losing touch with traditional styling, our fairing adds subtle & classy styling improvements to set your bike apart from the crowd.  The impressive list of standard features & long list of optional accessories make this the best fairing on the market!

Standard Features

• Gloss finish color-matched to H-D Vivid Black on outer fairing-choose to leave it black or have it custom painted to match your bike
• Lightly textured black inner fairing resists finger prints and other marks
• Cigarette lighter/12V power point (left side of inner fairing)
• 4" Dark smoke windshield (interchangeable with any '96+ Electra Glide windshield)
• Chrome mounting brackets
• Glove Compartment featuring:
• Sealed, lockable storage with room for several CD's
• Rubber mat keeps items from shifting; Easily removable for cleaning
• Built-in cigarette lighter/12V power point
• Door marked for easy installation of GPS mount cradles (4-hole AMPS pattern)

  Audio System

• CD & AM/FM-30 presets (18 FM, 12AM)
• Direct control of most iPod:  (Includes power/ interface cable routed into Glove Compartment for safe, secure transport of your iPod)

             * iPod Nano - 1st, 2nd, & 3rd generation
             * iPod Mini
             * iPhone - 1st generation
             * iPod Touch - 1st generation
             * iPod 5th generation & older
             * iPod click wheel

• Front SD card slot, USB port, & 3.5mm auxiliary input jack
• One pair of RCA pre-outs (rear)
• RCA auxiliary input (rear)
• 5"x7" Speakers specifically designed & tuned for use on a motorcycle by Hogtunes, Inc- No off-the-shelf car audio speakers!

Innovative design & exceptional style, what more could you want? Our new windscreen creates a cockpit-like feel & streamlined appearance. Unlike other short windshields on the market, our Sport Windscreen directs air smoothly over the fairing resulting in constant, predictable wind pressure on your face without annoying buffeting & turbulence common to other short windshields.

Made from dark smoke, premium quality, hard-coated polycarbonate, it provides impact resistance not possible with acrylic shields. We’ve masked the bottom edge for an exceptionally clean appearance when installed by itself or when used with our Windshield Trim for an even cleaner appearance.

Note: Riders will feel wind pressure on their face. Windshield is 11-1/2" from base to top & sits 2" higher than stereo surround. If wind protection is of primary importance & you do not like wind in your face, we suggest our Touring version (P/N KU-1364)

Provides excellent wind protection & unmatched style. Unlike anything you've seen before, this windshield allows you to get rid of the frumpy stock windshield & replace it with a piece that transform the look of your bike from city bus to private jet. The windshield's contours complement the lines of both the inner & outer fairing while directing the wind up & over the rider with minimal turbulence.

Made from light smoke, premium quality, hard-coated polycarbonate, it provides impact resistance not possible with acrylic shields. The bottom edge is masked for a neat appearance with or without our Windshield Trims.

Guide airflow around the fairing for reduced turbulence during cool weather or open them for a refreshing breeze on those scorching hot days. Adjust to any of four different positions by hand via a spring-loaded mechanism. Shatter resistant polycarbonate construction.

Fits:   ’96+ Electra Glides, Street Glides, Trikes; & Küryakyn AirMaster Fairing

Boss Blades are a stunning addition to our line of custom levers. Their wide, deeply dished blades greet your fingers with the shortest reach possible while still allowing the necessary range of motion. Their sculpted surfaces and chiseled ends scream Who’s Boss.

The 1080 (adjustable) relocates the cable anchor point to allow the lever to be adjusted closer to the handlebar (up to 3.4" at the tip) without affecting clutch actuation.

1036 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1038 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)
When 1038 is installed on an '08-'09 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1057 Fits: '08+ Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

1080 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)

Note: Installer is responsible for ensuring proper clutch disengagement when levers are installed. Clutch and clutch cable must be correctly adjusted and installer must verify grip diameter does not adversely affect clutch operation.

Motorcycling is about being exclusive so break free & show off your bold style with the Deluxe Windshield Trim from Küryakyn. This new windshield trim features detail not possible with ordinary flat trims; including a raised profile slightly above the fairing with a molded rubber liner that will not only dampen vibration but also protect the paint; other features include incorporated snap-in screw covers for a clean look & simple installation.

Fitment: 96+ Electra Glides, Street Glides, H-D Trikes, AirMaster and other fairings of same type/style (H-D 3 bolt pattern)

Introducing the first, truly multipurpose backrest & luggage rack system only available from Küryakyn. Once installed, no tools are needed for adjustments making the switch from rider to passenger backrest a snap. Full adjust-ability will help you enjoy those longer rides & with the incorporated luggage rack, carrying all your stuff just got a whole lot easier.

• Truly multi-purpose – provides driver or passenger backrest along with a convenient luggage rack that can be used in either position.
• Sturdy aluminum main frame, steel folding luggage rack with rubber inserts, & comfortably padded backrest.
• Extremely versatile – backrest converts from driver to passenger without tools in seconds.
• Backrest pad is fully adjustable via stainless sliding rods with push-button locks & knurled threaded knobs.

Backrest & Mount Plates sold separately. You must order the Back rest #1660 and then order the appropriate Mount kit for your model bike!

Note: use Fixed low mounts for seat less than 6" thick (measured at front of passenger seat)

1665 is compatible with stock seats on '09-'10 FLHX, '09 FLTR, '10 FLTRX, and '09-'12 FLHRC
1666 is compatible with stock seats on '09-'12 FLHR, '09 FLHT Standard, '11-'12 FLHX, '11-'12 FLTRX.

Side Mount License Plate mounting clamps are sold separately & allow the license holder to be installed on the swingarm of Dynas, Sportsters, Softails, & Rockers!

Please check local laws regarding side mount license plates before ordering.

Bring everything you need with you! Elastic mesh pockets & multiple pouches make your items readily accessible. 1200 Denier nylon construction, heavy-duty zippers, & zip-out rain cover. Bags also feature mounting straps utilizing both hook-&- loop fasteners & elastic shock cords. Attaches to GL1500 & GL1800 racks as well as most other racks on the market.

Fitment: Attaches to Küryakyn Luggage Rack, H-D & other standard racks on the market

Dim: Main bag 21.5" Long x 9.5" Wide x 8" High Two Pockets 4.5" Wide x 9" High x 3" Deep   Cubic inches: 1634

Fitment:
6229 fits: 08+HD models with electronic throttle control (Glides, Road King, Trikes)
6203 fits: "82+ HD models with dual cable throttle

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

True vintage styling of the 40’s & 50’s! Light weight ABS design & simple Peal-&-Stick, your back flying down the road in no time!

Fitment:
Universal Front Fenders with approximately 15-1/4” radius
Typical Fitments Include:
H-D: Late Model Touring Models & Softails
Honda: All ‘01-’12 GL1800 Models, VTX1800C/F, VTX1300C, Fury, & VT1300 Custom Line
Kawasaki: Vulcan 1700 Models & Voyager, Vulcan 900 Models
Yamaha: V Star 650, 950, 1300 Models & Road Star Models (Does Not fit Roadliner, Stratoliner, or Raider)

Whether this is the first piece or the last piece you are adding to chrome your hand controls, this is a must have with its smooth lines. These housings will accept stock '96-'09 H-D switches.

Add part number 9119 or 9126 and you'll have everything you need to complete your family of chrome hand controls.

Fitment:
7808 is for HD: '96+ VRSC, XL, Dyna, Softail, & FLHR (except '03 FXSTDSE & '03 FLHRSE) 
7806 is for HD: WITHOUT Cruise - '96+ FLHTC, FLHT; '06+ FLHX; '10+ FLTRX, FLHXXX
7807 is for HD: 96+ FLHTCU,FLTR,FLHRC, ’09+ FLHTK, FLHTCUTG Note: Will also fit ’02+ FLHR if equipped with Cruise.
1742 is for HD: WITH Cruise: ’02+ FLHTC, FLHX, FLHT;  ’10+ FLTRX, FLHXXX

A perfect match to our Flush Mount Gas Cap, The Informer's sleek, low profile design incorporates both an L.E.D. fuel gauge and an L.E.D. battery gauge. A daylight sensor automatically adjusts the brightness of the L.E.D.'s. The fuel gauge has a string of color coded L.E.D.'s to indicate fuel level. When full, a single green L.E.D. will be illuminated at the right end of the string. When the tank is virtually empty, a single red L.E.D. will flash at the left end of the string. Red L.E.D.'s appear from empty to 1/8 tank, amber L.E.D.'s appear from 1/4 to 1/2 tank, and green L.E.D.'s appear from 5/8 to full.

New for 2008, our Patent Pending design allows the rider to select the fuel level at which the red "empty" L.E.D. illuminates. The stock float and sending unit are notoriously inconsistent and often contribute to inaccurate readings at the gauge. Want the gauge to read empty when the bike is on fumes? No problem. Want the gauge to read empty when there is still a gallon left in the tank? No problem, the choice is up to you.

The Battery Gauge is an array of L.E.D.'s that indicate the operating voltage of the bike's electrical system. Green L.E.D.'s represent the normal, safe operating range of your charging system, 12.5v to 14.5v. Amber L.E.D.'s warn the rider that the bike is not charging. If the reading drops below 10v or exceeds 15v, a flashing red L.E.D. will alert the rider.

Note: Fits all H-D models with fuel gauge mounted in left fuel tank.

 

It's no secret - most top designers in any field would concur. The keys to good looks are keeping it simple & highlighting the contours. Regardless of the color or finish, chrome goes with anything & these elemental accents will add depth & character to the time-honored Bat-wing fairing. Bat Lashes require no tools & no drilling. Simply clean the surface, peel, stick & admire! Lighted Bat Lashes are also surface mount but require drilling to route wiring.

Fitment: 96+ Electra Glides, Street Glides, H-D Trikes, AirMaster fairings (and other fairings of that style)

As your taillight fades into the darkness, the sinister impression of the Zombie is all that will remain. A new addition to our popular collection, this taillight cover reinforces the image of your evil ride. All hardware is included for easy installation. 

Fitment: ’73-’11 H-D Models without bobbed rear fenders -
    EXCEPT: ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’10 FLSTN, ’00-’07 FXSTD, ’02+ V-Rod, ‘07+ XL1200N, ‘09+ XL88N,
                 ’08+ Rocker, ’09+ FXDB, ‘10+ FXDWG, ’10+ FLHX/FLTRX, '09 FLTRSE, '10+ FLSTSE, '10+ FLHXSE

An inexpensive, fast, & easy way to completely finish chroming most 96-09 hand controls!  The Clutch Perch is a complete chrome replacement unit that has been beefed up to complement the brawny look of a H-D. The Master Cylinder Cover dresses up the reservoir & covers the entire visible hand brake bracket assembly with a lush layer of glistening chrome. There are even replacement chrome clamp halves & hardware accents for a 100% detailed, pure custom look.

9126 - Fitment: Single Disc '96+ Softails & Dynas, '96-'03 Sportsters (set)

9119 - Fitment: Dual Disc '96-'07 Electra/Road/Street/Tour Glides & Road Kings, '96+ Dynas, '96-'03 Sportsters (set)

1740 - Fitment: ’08-’10 Electra Glides, Road Glides, Street Glides, & Road Kings (set)

1741 - Fitment: '04+ Sportster

Our streamlined Curved Laydown License Plate Mount is a major improvement over the stock "billboard" plate mount on many bikes today. The curved frame mates cleanly with the backing plate for a finished and completely custom look. Accents 4"x 7" plates.

Fits: H-D: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)
Metric: '03+ VTX1300 Retro/S/T or '02-'08 VTX1800 Retro/S/T Models
Universal: universal - may require drilling holes in fender

Hi-Flow Air Cleaner Backplate

You can get a power advantage over your riding buddies without revealing your secret weapon since the stock air cleaner cover is retained! 

• Best Performance at the Best Price
• 40% More Breathing Capability Than Kits Without "End Breathing" Technology of Küryakyn's Exclusive Filter by K&N
• No Restrictive Paper Elements Here
• Includes Everything You Need for a Quick & Easy Performance Upgrade - Retains Stock Outer Cover

You've decked our your Bagger with enough chrome to blind a guy with welding glasses, now it's time to do something about that stock, utilitarian windshield. This windshield is manufactured from premium quality, optically clear, hard-coated polycarbonate. Unlike acrylic, polycarbonate will not crack or shatter upon impact.

Available in light or dark smoke tint and in 4", 6" and 8" heights.

Fits:
HD:  '96-'10 Electra Glides & Street Glides, & Trikes
Küryakyn Airmaster Fairing & Sportech Detachable Fairing Plus

Designed specifically for H-D's FLST Models, our mounting kit works with or without an OEM light bar. The chrome-plated, stainless steel brackets easily bolt to the sides of the forks & provide a sturdy foundation for the windshield assembly. Their elegant design & beautiful chrome finish looks great with or without the windshield installed.

Quite Simply The Best Windshield You Can Buy For The Money - The Bar Has Been Raised!

• Mounting Kit (required) and windshield are sold separately
• Premium .125" Optical Grade, Hard-Coated Polycarbonate
• All windshields include Zombie & Grooved interchangeable emblems
• Unsurpassed style - Unlike flat, plain-looking outer cross & vertical hardware, our stainless steel outer hardware is beautifully stamped & chrome-plated for a rich, classy appearance
• Three heights; Low, Mid, Tall - Choose the look & level of wind protection that's right for you (mounting kit sold separately)

It's no secret - most top designers in any field would concur. The keys to good looks are keeping it simple & highlighting the contours. Regardless of the color or finish, chrome goes with anything & these elemental accents will add depth & character to the time-honored Batwing fairing. No tools needed & no drilling. Simply clean the surface, peel, stick & admire!

Fits: '96-'10 Electra Glides & Street Glides (and Trikes)

• Complement the ISO Pegs Footpegs
• Longhorn is 25% longer than standard version
• Replacement Cushions available separately

It is important to remember that the reason we offer so many versions of Boomerangs is not due to differences in the frame itself, but due to components bolted to the frame that affect installation of our covers. Exhaust support brackets will directly affect which covers to order. Please read the applications notes carefully before ordering. Boomerang frame covers are not compatible with H-D passenger footboards.

DS373976 Fits: All '00-'07 FXST (except Deuce) & all '00-'07 FLST (except Fat Boy & Deluxe...see Note)
Note: If you have a '00-'07 Fat Boy or '05-'07 Deluxe & have removed the O.E. rear exhaust support bracket, you should use DS373976.

DS373977 Fits: '00-'06 Fat Boy with Shotgun Exhaust using O.E. rear support bracket
1906-0001 Fits: '00-'07 Deuce with exhaust system not using O.E. rear support bracket
DS380513 Fits: All '86-'99 FXST Models & all FLST Models without Shotgun Exhaust

Scorpion Spark Plug-Head Bolt Covers add a classy touch to the Twin Cam engine. These covers are held in position with set screws, ensuring rattle-free performance.

With this design, the spark plugs can be removed without taking the covers off.

Stock gas caps do a good job of keeping gas in the tank, but as far as style goes, they look like refugees from Grandpa’s Buick.

These slick Flush Mount Gas Caps have the high-tech look of aviation-style fuel fillers. The built-in trim ring protects the painted surface around the filler opening from dings & gas stains. A keyed entry system permits their ultra thin profile & prevents tampering. No cutting required. US Patent D400,838

Fits: All H-D screw type tanks from 1982+

These are the finest levers on the market today. You see, your forefinger is your strongest finger. But, other levers won't let your strongest fingers work. Kuryakyn levers allow the forefinger to get a real grip, making it much more comfortable and easier to pull the lever. Add to that the dished out backside of the levers, which Barnett invented twenty-some years ago, and you've got the best set of levers you'll ever own. Your hands just fall naturally into place. If you've got small hands, these are a must.

1021 Fits: '82-'95 H-D Models

1029 Fits: ’96-’11 H-D Models with Cable Operated Clutch (except ’04-’11 Sportsters & ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes)
When 1029 is installed on an '08+ Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1056 Fits: ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

As tasteful as an Oscar, this beautifully sculpted set of levers adds a really unique accent to any bike. They are also very comfortable on the hands.

1024 Fits: '82-'95 H-D Models

1019 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1049 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra/Road/Street Glides, Trikes, & Road Kings)
When 1049 is installed on an '08 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1055 Fits: '08+ Electra Glide, Road Glide, Street Glide, Dressers, Trikes, & Road Kings with Cable Operated Clutch

Theanswer to more leg room on floorboard equipped H-D Models! Levers move the location of the brake pedal pad forward & down while flattening the angle of the pad. Now your foot is no longer “under” the brake pedal, resulting in easier & more natural braking. All levers are beautifully polished & chrome-plated steel. They have a bronze bushing with a grease fitting for smooth operation & long life.  Note: on ‘02-later models, the extended brake pedals provide only slightly more extension then stock, but the brake pedal pad is slightly lower and flatter, making the transition from board to brake more natural.

1027 fits: '97-'07 Electra Glides, Road Glides, Street Glides, Road Kings; & '87+ FLST Models

1070 fits: '08+ Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

1071 fits: '08+ Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

9081 fits: '97-'07 Electra Glides, Road Glides, Street Glides, Road Kings; & '87+ FLST Models

These premium quality accessories quickly & easily allow you to remove the heel shift lever on Dressers, Road Kings, or any FLST Model. Unique design keeps the shift shaft in perfect alignment to avoid premature shaft wear, a problem common to similar products. The Delrin lining eliminates rattles & keeps your bike shifting as smoothly as ever.

Brake away from the ordinary and clutch the gaze of onlookers with Küryakyn's new Zombie™ Levers. Comfortable contours and a dished back allow high leverage with minimal reach; a gripping addition to this popular collection. Sold in pairs.

1047 Fits: '96+ H-D Models with Cable Operated Clutch, (except '0+ Sportsters & '08+ Electra/Road/Street Glides, Trikes & Road Kings)
When 1047 is installed on a '08+ Softail or Dyna the brake lever will be positioned approximately 3/8" further from the bar than the stock lever.

1058 Fits: '08+ Electra Glides, Road Glides, Street Glides, Trikes & Road Kings with Cable Operated Clutch

Our choke knob cover installs neatly over the stock black plastic unit. Not only does it look 100% better, it’s easier to find & get a hold of!

Fitment -
H-D: All '88-'06 XL Models & '90-'06 Big Twin with stock carburetors
Honda: All VTX1300, '04-'09 Shadow 750 Aero/Spirit C2
Kawasaki: Vulcan 800/1500/1600
Yamaha: '99-'07 Road Star 1600/1700, Royal Star Venture, V Star 650/1100

This slip-on chrome accent is a great way to finish unsightly transitions. Just slip it into place & tighten the set screw - it's that easy!

Fitment:
H-D: Clutch Cables on '87-'99 Big Twin & '91-'06 Sportsters
Metric: V Star 650 Models

It's time to finish the job with our Chrome Throttle and Idle Cable Covers.  Quick and easy installation - Requires no disassembly of your controls or cables.

Fitment: All '82+ Models with 90 Degree Cable Elbows

Our spider themed hand grips are a radical departure from average. Designed with style and comfort in mind, with an integrated, adjustable throttle boss, these grips make a great addition to our Widow Pegs and Widow Shift Linkage.

Our spider themed hand grips are a radical departure from average. Designed with style and comfort in mind, with an integrated, adjustable throttle boss, these grips make a great addition to our Widow Pegs and Widow Shift Linkage.

It's hard to imagine any piece of cool metal feeling better in your hand. Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.

6291 Fits: '82+ H-D Models with dual cable throttle control

6293 Fits: '08+ H-D Models with electronic throttle control (Electra Glides, Road Kings, Road Glides, Street Glides, Trikes)

The look is purely wicked, but they look & feel is so cool! Smooth chrome bodies with vibration absorbing rubber inserts assure a comfortable & secure grip to keep control in hand. Zombie end caps enhance the specter of evil as the numbers of this coven of accessories continue to multiply. Zombie Throttle Boss included or sold separately - fits right side only.

Our original retractable passenger pegs redefined passenger comfort. The test of time and input from customers has helped us to refine this popular accessory, improving its fit and function. This kit gives you the ability to move your feet up or down and best of all when the driver has his or her feet on the highway pegs you can stretch your legs by laying your calves on the footrests. You will love the flexibility. A bolt action locking device on the swing arm adds one intermediate position to make hours in the passenger seat more enjoyable for passengers of different heights. A revised mounting system allows easier installation and improved fit on newer models. Does not interfere with footboard operation.

Fitment:
'93-'08 with Stock (black) Mounts,
'04-'06 Screamin' Eagle FLHTCSE and FLHTCUSE with Rinehart Exhaust,
'07-'08 Screamin' Eagle FLHTCUSE with Rinehart Exhaust ('07-'08 Screamin' Eagle Ultra Classics must remove the stock adjustable passenger board mounts and replace them with fixed mounts.)
'93-'09 with Chrome Küryakyn Mounts (P/N 4536) or Chrome H-D Accessory Mounts (H-D P/N 53070-00)
'93-'08 with Chrome Küryakyn Mounts (P/N 4536) or Chrome H-D Accessory Mounts (H-D P/N 53070-00) & Rinehart Exhaust
'93-'08 with H-D Chrome or Black Passenger Floorboard Support Kits (H-D P/Ns 52714-04 or 50378-07) & Rinehart Exhaust
Street Glide, Road King Custom, Screamin' Eagle Road King, or other Touring Models that come with Passenger Pegs (see note below)
Street Glide, Road King Custom, Screamin' Eagle Road King, or other Touring Models that come with Passenger Pegs with Rinehart Exhaust (see note below)
NOTE: Street Glide and other Models updating from passenger pegs to passenger boards may substitute H-D accessory passenger boards for our ISO-Passenger Boards.

Capable of supporting engine builds that produce up to 120 H.P. The body is 1/2" wider than a standard Hypercharger. 

"Pro" embossed bearing cups give this performance weapon a look that screams horsepower!

The Pro-Series Hypercharger fits Stock or 44mm C.V. style carbs, and can be easily adapted to Mikuni HSR42/45/48 and S&S Shortys. 

Pro-Series Hyperchargers come complete with mounting hardware and crankcase breather kits.

Accent the transition from bike to windshield while adding attitude.

Küryakyn is fired up to offer these top-quality, custom windshields for H-D Touring Models. High-end windshields custom-formed from premium materials using proprietary processes. Crown your bagger with the coolest windshields available.