The answer to every Roadliner/Stratoliner rider's needs is provided by Baron's new 'Liner Pullback Risers. These beautifully-styled risers move your stock handlebar back towards the rider 2 1/4 inches while only raising the bar height 1 inch. And, you can use all the stock lines, cables and controls.The answer to every Roadliner/Stratoliner rider's needs is provided by Baron's new 'Liner Pullback Risers. These beautifully-styled risers move your stock handlebar back towards the rider 2 1/4 inches while only raising the bar height 1 inch. And, you can use all the stock lines, cables and controls.

• Increases horsepower
• Increases torque
• Quickens acceleration and attains speed more rapidly
• Stronger-pulling power rockets you down the road without hesitation
• Improves cooling
• Machined High Flow Velocity Funnel Base Mounts improve air flow to the throttle bodies
• Integrated Aluminum Power Cones reduce turbulence and increase air load velocity
• Proprietary High Flow Airaid reusable filters for long life
• Provides a deeper, healthier roar
• System cleanly integrates under the fuel tank and replaces bulky stock air box assembly
• Includes unique relocation mount/hardware to reposition coils, sensors and vacuum pumps
• Provides multiple options for cleaning up clutter on the sides of the engine
• Includes detailed easy-to-follow instructions for a do-it-yourself installation

Fitment: Roadliner/Stratoliner and Raider

Beautifully chromed, this T-6061 billet aluminum piece is precision-machined to cover your rear pulley, instantly providing a mirror-like surface that’ll brighten up your swing arm. Enhance your bike’s profile and set your ‘Liner apart from all others.

Baron designed this outstanding part to provide a lustrous chrome finish to an area of your motorcycle that is normally very expensive to chrome, and often requires days, if not weeks, of down time to acquire. Hidden mounting hardware ingeniously captures the pulley spokes from behind, allowing the cover to mount seamlessly on the pulley’s surface.

Available in Deco (shown in main photo), Mirror or Enferno decorative milling styles. Mounting takes about 45 minutes using basic tools and a home lift or floor jack, and does not require complete removal of rear wheel.

Don’t hesitate - this cover is an outstanding edition to your Stratoliner or Roadliner, adding a finishing touch to a high visibility area!

Fitment: Road Star 1600, Roadliner, Stratoliner

This beautifully chromed assembly has a curved shape that blends and contours with your fender, eliminating the bland and heavy stock license plate holder. Hidden hardware design provides seamless mounting, leaving others wondering how it was installed. Unique backing plate allows for super-quick and easy installation while the mounting position provides perfect alignment for illumination by your stock taillight.

All necessary mounting hardware is supplied.

• Engineered to lower the rear of your motorcycle up to 1-3/4 inches lower than stock.
• Lowers the center of gravity, easing handling effort and improving control.
• Gives the bike a tough, custom stance.
• High quality steel construction and precision machined for an excellent fit and easy installation.
• Easy-to-follow instructions are include.
• We recommend the addition of our Shorty Kickstand for more stable parking, sold separatel.

• Seven positions for comfort*: 7 position choices allows positioning for optimum comfort. Provide up to 6" more legroom.
• Multiple tilt angles*: Boards tilt to relieve stress in the thighs, calves and ankles by taking the flex out of the calf.
• Style: beautifully polished and finished with brilliant chrome. Available in "Enferno" or the more traditional "Solid" styles.
• Comfort: 8-½” x 3-½” surface area and vibration reducing anti-slip rubber pads provide comfort and solid foot support.
• Body control: Additional body control is provided by board's design, improving user confidence.
• Fold up: The boards fold up when not in use, adding an additional splash of brilliant chrome.
• Rider or Passenger: Usage depends on mount kit.
• Matching sets: Baron’s matching Rider Long Boards, offering similar adjustability, may be added to give you a matching set.

*Please note: Adjustability may vary by model depending on accessories and whether boards are used for rider or passenger.

Mounting Brackets required. Sold separately.

Fitment: Road Star 99+;  Royal Star 96-01;  RS Tour Deluxe 05-09;  Roadliner/Stratoliner 06+;  Venture 99+

• Full-size Engine Guard
• Protect your investment with “The World's Strongest Engine Guard"
• Mounts Direct to the frame (No cheap universal clamps)
• Ergonomic hoop design provides excellent foot peg locations
• Beautifully polished and Chromed
• Works with O.E.M. windshields, lowers and floorboards
• Heavy duty 1.25” diameter steel tube with 1/8” wall thickness
• Mounts easily in just minutes
• Easy-to-follow instructions

Fitment:

• Yamaha Raider (08+)
• Yamaha Roadliner (06+)
• Yamaha Stratoliner (06+)

Our adapter has been redesigned for Suzuki C50/C90, Kawasaki Vulcan 900/2000 and Harley owners that have had tach bounce issues in the past. This adapter is the cure for your tach bouncing headaches!

• Provides correct RPM display
• Fits most accessory electronic tachometers
• Required for most two or four cylinder engines with single-fire ignitions
• Required for most bikes equipped with fuel injection
• Reduces needle fluctuation
• Integrated features allow use on ’08 Harley-Davidson models

The Profiler Gas Cap assembly gives your fuel tank that cool, custom look while eliminating the need for the bulky stock locking gas cap. Baron spent over two years in designing the special tank insert that allows the use of a sleek screw-in type polished stainless steel gas cap. Installation of the insert is quick and easy, without the need for any special tools. Installs in minutes with included 2-part epoxy.

Baron Profiler cap and insert can be used on all Star models, including Road Star, Royal Star, Roadliner, Stratoliner, Star Venture, V-Star 650, 950 and 1100. Also fits nicely on the Vulcan 900 Classic/Custom/LT

• Finish your master cylinders with a flash of chrome
• Available in Smooth, Flame or Black finish with Flame exposed.
• Adds a distinct stylish accent to your handlebar area
• Direct replacement for stock covers and can be installed in minutes
• Machined from T-6061 billet aluminum
• Hand polished and brilliantly chromed
• Includes left and right side covers
• Kits come complete with chrome hardware and installation guide

• Increases rider’s foot and legroom
• Improves leg and knee comfort
• Five positions of adjustment
• 13” length, tapering from 4” wide down to 2-3/8” provides expanded foot positioning
• Beautifully chromed billet aluminum construction
• Narrow design allows greater cornering lean angles
• Easy to install
• Available in Flame or Solid styles
• Matching Passenger Short Boards are available

Mounting Brackets required. Sold separately. See related products below.

Fitment:
Road Star (all);  Roadliner/Stratoliner 06+;  Royal Star 96-01;  RS Tour Deluxe 05-09; 
V-Star 1100 Classic 99+;  V-Star 650 Custom 98+;  Venture 99+

• Use what the professionals use to cover cables, hoses and wires quickly and inexpensively
• Cover your wire harnesses, handlebar wiring, brake lines, throttle lines and fuel hose
• Expands easily to fit over ends for smooth installation and long lasting protection
• Chrome kit - the Dynamic chrome covering adds a bright, shiny appearance
• Fits snugly for a clean, custom look
• More than enough product to do your entire motorcycle
• Can be used to customize any motorcycle
• Kit includes: 6-ft of 1/2”, 20-ft of 3/8”, 8-ft of 1/4” diameter, expandable covering plus zip ties and black and clear shrink tubing. (chrome kit has chrome zip ties).

• Fits all H-D, American or Metric V-twins
• Accurate 0-8000 RPM data every biker needs
• Beautifully chromed sleek bullet-shaped housing
• 7-color LED illuminated face for extra attitude - also available in black or white face
• Integrated bar clamp allows nearly limitless mounting on 1” handlebars
• Black and white face are backlit and are also available for 1 1/4" and 1 1/2" handlebars
• Easy install – includes complete hardware kit
• Easy to follow instructions
• Extra long wire leads
• Includes Tach Adapter for single-fire ignition
• Fits most 2 or 4 cylinder motorcycles
• 2-7/8” D x 3-1/2” L compact housing
• Weather resistant for long life
• Great function – Stylish looks – Awesome value!

Beautiful, dynamic and comfortable? Yes in fact they are. These specially designed grips are contoured to fit a riders hand which eliminate the need to squeeze them with the force most billet grips require. The decorative flame milled design flows gracefully across the surface and the interlocking flames seem to flicker in the sunlight.

Fits all Honda 1" handlebars.

Fitment (known to fit the following models)
  Honda: Magna, Shadow Ace/Areo/Sabre/Spirit, VLX, VTX1300, VXT1800

Beautiful, dynamic and comfortable? Yes in fact they are. These specially designed grips are contoured to fit a riders hand which eliminate the need to squeeze them with the force most billet grips require. The decorative flame milled design flows gracefully across the surface and the interlocking flames seem to flicker in the sunlight.

Fits all Yamaha/Suzuki/Kawasaki 1" handlebars.

Fitment (known to fit the following models)
Yamaha: Raider, Road Star, Royal Star, V-Star 1100 Classic/Custom, V-Star 650 Classic/Custom, Venture, Warrior
Kawasaki: 1500/1600 Classic, 1500 Drifter, Mean Streak, 1500 Nomad, Vulcan 2000/800/900
Suzuki: Intruder LC 1500/C90, Marauder 1600/M95, Volusia/C50, M109R

Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s cruisers and as the best possible fit for most riders.

Each handlebar is bored and dimpled to allow for internal wiring. Requires longer control cables, but accepts all stock 1" type controls. Fits bikes with riser spacing of 3-1/2" to 4". Works with most stock and aftermarket risers. It is recommended that you check your local codes for handlebar height to be sure these bars are legal in your area.

Dimensions: Diameter: 1-1/4", Width: 37", Rise: 17", Pullback: 12", Center Width: 10"

Known Bike Fitment: (Honda & Suzuki models require minor drilling)

• Honda: Magna, Shadow Ace/Sabre/Spirit
• Kawasaki: Mean Streak, 1500 Drifter, 1500 Nomad, Vulcan 1600 Classic, Vulcan 2000, Vulcan 90
• Suzuki: Intruder 1400/S83, 800/S50, Volusia/C50, 1500LC/C90, Marauder 1600/M95
• Yamaha: Road Star 1600/1700, Royal Star 96-01, V-Star 1100 Custom/Classic, V-Star 650 Custom/Classic

Kickback Risers provides immediate relief to those stretching to reach their handlebars. Our 4" risers provide approximately 1-1/2” of pullback. This repositioning of the rider's grip point reduces the stress and pain most riders feel in their neck, back and shoulders. Also, by relocating the bars closer to the rider the motorcycle becomes much easier to steer and control.

Each riser has its own individual stylish cap with mounting hardware, which lightens the look of the front end and allows mounting of a tachometer or other accessory.

Installs on most bikes with a 1" handlebar clamping area and works with most stock control lines and cables with simple re-routing on most models. 1/2" diameter mount bolts allow these risers to mount in most triple trees

• Sleek beautifully chromed housing
• Accurate 0-8000 RPM data every biker needs
• Mounts easily in multiple locations and positions
• Super bright LED illumination for night riding
• Choice of black or white face
• Available for 1" handlebars
• Compact 40mm D x 3-1/2” L housing
• Hardware and EZ-follow instructions included
• Includes Tach Adapter for single-fire ignition
• Fits most 2 or 4 cylinder motorcycles

• Billet aluminum housing with removable bezel
• Housing specifically accepts stainless steel electronic tachometers or speedometers with body dimensions of 2.4” (61mm) diameter and a depth of 2.3” (59mm), along with bezel diameters of 2.64” (67mm)
• Integral mount for 1” or 1-1/4” handlebars available - See related products below for 1" clamp Gauge Housing (BA-7575-00)
• Housings can be mounted in multiple positions and locations
• Wires exit at the rear of the housing and a rubber wiring grommet is included
• Installation is easy and instructions are included
• Does not work with gear driven gauges

These polished stainless steel brackets allow you to add custom marker lights to your bike quickly and easily. Accepts most aftermarket marker lights.

Available in 90-degree bend, flat or 67-degree bend. Each set includes two mount tabs. 90-degree bend is commonly used for front mounts, and flat for rear.

67-degree bend set:
   Yamaha fitment: Install in existing fender holes to either side of your stock brake light. Works very well with our Laydown License Kit (BA-3105U).
    Kawasaki fitment: These allow you to add custom marker lights to the front of your Mean Streak quickly and easily.

• Use what the professionals use to cover cables, hoses and wires quickly and inexpensively
• Cover your wire harnesses, handlebar wiring, brake lines, throttle lines and fuel hose
• Expands easily to fit over ends for smooth installation and long lasting protection
• Chrome kit - the Dynamic chrome covering adds a bright, shiny appearance
• Fits snugly for a clean, custom look
• More than enough product to do your entire motorcycle
• Can be used to customize any motorcycle
• Kit includes: 6-ft of 1/2”, 20-ft of 3/8”, 8-ft of 1/4” diameter, expandable covering plus zip ties and black and clear shrink tubing. (chrome kit has chrome zip ties).