If you liked our chrome ISO-Grips then you’ll love our new Black ISO-Grips. These powder-coated black grips dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort. Get total comfort with our matching throttle bosses. These grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO� pads permit air movement for added comfort in hot weather. The knurled accent ring adds a touch of class. All grips are sold in pairs. Add the ISO Throttle BOSS for more comfort! Accent rings are available in several colors to match your bike paint theme. The removable end caps allow access to handlebar air reservoir fittings.

6320 will fit all Harley-Davidson (H-D) models with dual cable throttle control.
6321 is for models with electronic throttle control (TBW) 2008+ Electra Glide, Road King, Road Glide, Street Glide and Trikes

As tasteful as an Oscar, this beautifully sculpted set of levers adds a really unique accent to any bike. They are also very comfortable on the hands.

1024 Fits: '82-'95 H-D Models

1019 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1049 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra/Road/Street Glides, Trikes, & Road Kings)
When 1049 is installed on an '08 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1055 Fits: '08+ Electra Glide, Road Glide, Street Glide, Dressers, Trikes, & Road Kings with Cable Operated Clutch

Brake away from the ordinary and clutch the gaze of onlookers with Küryakyn's new Zombie™ Levers. Comfortable contours and a dished back allow high leverage with minimal reach; a gripping addition to this popular collection. Sold in pairs.

1047 Fits: '96+ H-D Models with Cable Operated Clutch, (except '0+ Sportsters & '08+ Electra/Road/Street Glides, Trikes & Road Kings)
When 1047 is installed on a '08+ Softail or Dyna the brake lever will be positioned approximately 3/8" further from the bar than the stock lever.

1058 Fits: '08+ Electra Glides, Road Glides, Street Glides, Trikes & Road Kings with Cable Operated Clutch

Kuryakyns's new ISO�-Flame Grips have a unique flamed pattern in the soft and cushy rubber pads. Finished off with a Maltese Cross emblazoned end cap and trim ring for that additional bad attitude look. This grip accepts the wildly popular ISO-Throttle boss, which greatly aids your hand on those long rides to the next rally. Sold in Pairs

Fitment:
6269 fits: 08+HD models with electronic throttle control (Glides, Road King, Trikes)
6260 fits: "82+ HD models with dual cable throttle

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

Our spider themed hand grips are a radical departure from average. Designed with style and comfort in mind, with an integrated, adjustable throttle boss, these grips make a great addition to our Widow Pegs and Widow Shift Linkage.

Our spider themed hand grips are a radical departure from average. Designed with style and comfort in mind, with an integrated, adjustable throttle boss, these grips make a great addition to our Widow Pegs and Widow Shift Linkage.

The look is purely wicked, but they look & feel is so cool! Smooth chrome bodies with vibration absorbing rubber inserts assure a comfortable & secure grip to keep control in hand. Zombie end caps enhance the specter of evil as the numbers of this coven of accessories continue to multiply. Zombie Throttle Boss included or sold separately - fits right side only.

Replace the ugly stock grips with this magnificent model machined from solid aluminum and chome to perfection. Replace the ugly stock grips with this magnificent model machined from solid aluminum and chome to perfection.

Boss Blades are a stunning addition to our line of custom levers. Their wide, deeply dished blades greet your fingers with the shortest reach possible while still allowing the necessary range of motion. Their sculpted surfaces and chiseled ends scream Who’s Boss.

The 1080 (adjustable) relocates the cable anchor point to allow the lever to be adjusted closer to the handlebar (up to 3.4" at the tip) without affecting clutch actuation.

1036 Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 V-Rod

1038 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)
When 1038 is installed on an '08-'09 Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1057 Fits: '08+ Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

1080 Fits: '96+ H-D Models with Cable Operated Clutch (except '04+ Sportsters & '08+ Electra Glides, Road Glides, Street Glides, Road Kings & Trikes)

Note: Installer is responsible for ensuring proper clutch disengagement when levers are installed. Clutch and clutch cable must be correctly adjusted and installer must verify grip diameter does not adversely affect clutch operation.

Fitment:
6229 fits: 08+HD models with electronic throttle control (Glides, Road King, Trikes)
6203 fits: "82+ HD models with dual cable throttle

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

These are the finest levers on the market today. You see, your forefinger is your strongest finger. But, other levers won't let your strongest fingers work. Kuryakyn levers allow the forefinger to get a real grip, making it much more comfortable and easier to pull the lever. Add to that the dished out backside of the levers, which Barnett invented twenty-some years ago, and you've got the best set of levers you'll ever own. Your hands just fall naturally into place. If you've got small hands, these are a must.

1021 Fits: '82-'95 H-D Models

1029 Fits: ’96-’11 H-D Models with Cable Operated Clutch (except ’04-’11 Sportsters & ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes)
When 1029 is installed on an '08+ Softail or Dyna, the brake lever will be positioned approximately 3/8" farther from the bar than the stock lever.

1056 Fits: ’08-’11 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch

It's hard to imagine any piece of cool metal feeling better in your hand. Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.

6291 Fits: '82+ H-D Models with dual cable throttle control

6293 Fits: '08+ H-D Models with electronic throttle control (Electra Glides, Road Kings, Road Glides, Street Glides, Trikes)

Grab a fist full when you squeeze on these pistol grip levers. They are CNC machined from extruded billet aluminum that is chrome plated.

The levers are just like HD OEM levers and will fit all HD's from 1996 except for VRod and 04-06 Sportster, and other models that use HD OEM levers (Indian, Big Dog, Iron Horse, etc.). Also available for Performance Machine Contour hand controls,

Sold as a pair.

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• The world's ultimate hand grips from Arlen Ness are machined from 6061 T-6 billet aluminum
• Roller bearing is pressed into the grip, allowing smoother turning and less "stuction"
• Fit 73-03 single- or dual-throttle
• Made in the USA

• Diameter 1/4&quote; smaller than other Joker grips
• Flared on the ends with square-milled lines in the body for better grip
• Fit 82-03 dual cable systems
• Made in the USA

• Avalible with a smooth or ball-milled design
• Grips feature fullu adjustable marker lights with amber lens front and rear
• Lights are not DOT approved, recommended for shop or off road use only
• For 82-03 dual cable systems
• Sold in pairs
• Made in the USA

• Grips feature a ball-milled design with engraved end caps
• Fits 82-03 dual cable models
• Sold in pairs
• Made in the USA

• Unique ergonomic design with extra length for added comfort
• Availble in geometric hex or spherical series
• Complements the Perse footpegs and front fork assemblies
• Fit 82-03 dual cable models

• Unique ergonomic design with extra length for added comfort
• Availble in geometric hex or spherical series
• Complements the Perse footpegs and front fork assemblies
• Fit 82-03 dual cable models

• Unique ergonomic design with extra length for added comfort
• Availble in geometric hex or spherical series
• Complements the Perse footpegs and front fork assemblies
• Fit 82-03 dual cable models

• Unique ergonomic design with extra length for added comfort
• Availble in geometric hex or spherical series
• Complements the Perse footpegs and front fork assemblies
• Fit 82-03 dual cable models

• Unique ergonomic design with extra length for added comfort
• Availble in geometric hex or spherical series
• Complements the Perse footpegs and front fork assemblies
• Fit 82-03 dual cable models

• Chrome billet aluminum grips
• Hourglass design gives great looks and provides secure grip
• Optional handlebar grip spacer allows a smooth transition from the grip to 1&quote; bars
• For all 82-03 models except air assisted for modles

Show Chrome Accessories Comfort Grips are easy to install, with CNC finish for extreme durability and chrome plated for a first class look.

These vibration dampening grips are ergonomically designed with a convex profile to fit the cup of your hand.The symmetrical rubber pattern provides you with total grip comfort reduces numbness, vibration and wrist fatigue in any position on the grip.

Comfort Grips are easy to install and utilize OEM throttle tubes.

For extra comfort on those long rides use Comfort Wrist Cruis™ (BB17-379C) on the right or left side (sold each).

• Available in plain or snake inlay
• Fits most cruisers
• Fringes on grip covers are 16" long

A totally unique heated grip based on their popular Comfort Grip line. These heated grips are CNC machined, cast aluminum with a brilliant chrome finish for a great look and durability. Chrome Heated Comfort Grips are ergonomically designed and have symmetrical vibration damping rubber inserts with a convex profile to fit the palm of your hand for unsurpassed comfort while riding. The variable position rheostat switch gives the rider ultimate control over the degree of warmth produced. This is the perfect way to keep your hands comfortably warm while riding during cool to inclement weather conditions. The control switch for cruisers easily installs on any 1” handlebar in a convenient position of the rider's choice. These Chrome Heated Comfort Grips will transform the way you think about heated grips.

Fitment: Cruisers with 1" handlebars for Vulcan 900 and Per-2008 Harley's

For extra comfort on those long rides use Comfort Wrist Cruis™ (BB17-379C) on the right or left side (sold each).

Tired of cold hands when riding? These are wind proof and water proof!!

Slot openings for mirrors and cables; tapers down to a Velcro closure. The outside is made of water/wind proff nylon and hte inside is quilted insulated nylon. Has a plastic support to prevent sagging or closing while riding.

Available in black only.

The levers are CNC machined from T6 extruded billet aluminum, chrome plated or black anodized and designed to mount to the factory Harley and American Iron Horse hand controls with cable clutch.

FITS '96-later HD and American Iron Horse & '03 and older Big Dogs.  DOES NOT FIT: V-Rod, Indian or '04-'06 Sportster. AM-8185C does not fit 06+ Sportsters.

These chrome Knuckle Levers will add some "attitude" to your bike. These aggressive levers are CNC machined from T6 extruded billet aluminum.

Sold as a pair.

Fitment:
all Harley Davidson's for 1996-2007 with manual clutch except 04-06 Sportster and NOT V-Rod.
Big Dogs 2003 & older
Also American Iron Horse and Performance Machine control applications.

*Note: Bike must be started in neutral when using the levers on 2007 and newer HD.

Update your look or just need replacements for ISO-Grips.  Standard length screws will handle one trim ring - order longer screws for more than one.

Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, & Transformer Grips unless otherwise noted.

Combining great style and comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO� pads permit air movement for added comfort in hot weather. The knurled accent ring adds a touch of class. All grips are sold in pairs. 

Add the ISO Throttle BOSS for more comfort! Accent rings are available in several colors to match your bike paint theme.

Dramatically reduces wrist fatigue often caused by long rides. Rotates forward all day long, yet when downward pressure is applied the throttle is regulated effortlessly & accurately without squeezing. A rider's best friend on long rides!

Note: Use 6258 & 6254 on grips with 1-7/16" to1-3/4" outside diameter. (H-D and most other 1" handlebars)

Use 6259 & 6257 on grips with 1-1/8" to 1-3/8" outside diameter.

Suggested use of 6258 or 6254 with all Küryakyn Grips

If you liked our chrome ISO-Grips then you’ll love our new Black ISO-Grips. These powder-coated black grips dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort. Get total comfort with our matching throttle bosses. These grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO� pads permit air movement for added comfort in hot weather. The knurled accent ring adds a touch of class. All grips are sold in pairs. Add the ISO Throttle BOSS for more comfort! Accent rings are available in several colors to match your bike paint theme.

Few things can take the enjoyment out of a great ride like, numb, tingling fingers.  Kuryakyn Grips are an excellent first step to keep vibration in check, but now you can improve their legendary comfort even more!  Grip End Weights quickly install on the end of each Grip adding mass & length to further reduce high amplitude handlebar vibration.  Their sculpted appearance & bright chrome finish also add a high-tech look to your already hot looking grips.

Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, & Transformer Grips
Note GL1800 ISO-Grips for OEM heated grips REQUIRE smooth trim accent rings for proper installation.

Combining great style and comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO-pads permit air movement for added comfort in hot weather. All grips are sold in pairs.

Add the ISO-Throttle BOSS for more comfort! Other grip accessories (trim rings, end caps, end wieghts, etc) sold separately.

Update your look or just need replacements for ISO-Grips.  Includes standard length screws.

Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, & Transformer Grips unless otherwise noted.

Added to the popular Kuryakyn ISO-Grips, this little jewel can make all the difference in the world on a long ride. The Throttle Boss is a small adjustable "paddle" that is positioned under the palm of one's throttle hand. This allows the driver to slightly relax the grip on the gas and still maintain a constant speed. Muscle stiffness and fatigue are reduced after prolonged cruising at a steady pace. Fits all ISO-Grips.A new redesigned rubber pad permits use on both grips for a matched set.

Extended ISO-Throttle Boss (1/4" Longer Than Standard ISO-Throttle Boss) NOT for HD or GL1800 with OEM heated grips (6183)

Some things just get better over time, like our new Contoured ISO-Throttle Boss! Updated styling combined with a larger surface area & pad provide even more comfort than the original design while still easing hand & forearm fatigue. Sold each - can be used on right and left side.

Fits: Küryakyn ISO-Grips,ISO-Flame, & Transformer Grips

NOTE: 6310 is only for 6183 ISO-grips for GL1800 with OEM heated grips

Specially formulated gel grip glue for all grips including heated. While there are several grip glues on the market, most do not live up to the performance needs of heated grips and most grip glues breakdown very quickly under heat. This high temperature grip glue is a heavy gel that has a high temperature tolerance as well as a low cold crack rating to provide a secure grip in all weather riding conditions.

Switches available - metal toggle (recommended for off road, ease of use with gloves) or round rocker (recommended for neat dash fit on sports bikes and tourers) For bar mounting, a separate 3 position switch is required.

NOTE: the heating units are NOT the same as the ones used in the Grip Heaters that have 4 levels of heat - they are NOT interchangable.

• 4 color LED Power Level Controller (dims for night riding), fast warm-up
  
• Heaters Install Inside the Handlebar
• Use the Grip of your Choice
• Thermister feedback keeps grip heat at selected level regardless of voltage variation or ambient conditions
• Hardware and Threading Tool
• 20 Watt per element, 40 Watts Total
• Available in weatherproof Chrome or Black - mounts to bar or perch (see pic)

• note: if you don't want to route wires inside the bar, use the Under Grip model Heat Demons instead

Need a flame grip to match your custom flame paint? Add the coolest tribal flame grips around. These Billet Grips are CNC macnied from solid 6061-T6 billet aluminum and chrome plated. They are smooth with a perfectly machined tribal flame pattern cut in.  The end of the grips have spiked end caps. The left (clutch) side cap can be removed to add a mirror with the use of our "Grip End" piece, mirror sold seperately (AM-2285LC).

The chrome billet grips are for 1" diameter handlebars and fits almost all metric cruisers.  The stock handlebars on most cruisers are 1" diameter.  Can be used with factory or other aftermarket hand controls.

The Harley/American version will also fit American Iron Horse, Big Dog (up to '04), Vengence, Saxxon, etc.

Need a Smooth grip to make your look? These Billet Grips are CNC macnied from solid 6061-T6 billet aluminum and chrome plated. They are smooth and the end of the grips have spiked end caps.

The chrome billet grips are for 1" diameter handlebars and fits almost all metric cruisers.  The stock handlebars on most cruisers are 1" diameter.  Can be used with factory or other aftermarket hand controls.

Regardless of what type of bike you ride, the Throttle Boss™ will make riding any distance more comfortable.  Designed to fit any type or size grip, the Throttle Boss™ can be installed in seconds to provide a cushioned "platform" to rest one's palm.  When not in use, it can be quickly removed (without tools) & stowed in a jacket pocket, tool bag, etc.

Fitment: Any application with twist grip throttle

It's hard to imagine any piece of cool metal feeling better in your hand. Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.

6232 is for:
  Honda: VTX 1300/1800, Fury, Rune, VT1100, VT750 (Ace, Aero, Phantom, RS & Spirit), VT 1300 Custom Line (Sabre, Stateline, Interstate), VLX, Magna
  Suzuki: Intruder 800/1400, S50, S83
  Universal: 1" handlebars (requires removal of any ribs on OEM throttle sleeves. If you want bar end weights, 6249 is a great choice.

The Throttle Rocker attaches to the grip with a velcro strap and allows you to maintain a steady cruising speed without keeping tight grip on the throttle. Fits any application with twist grip throttle. The Throttle Rocker attaches to the grip with a velcro strap and allows you to maintain a steady cruising speed without keeping tight grip on the throttle. Fits any application with twist grip throttle.

Kuryakyns's new ISO�-Flame Grips have a unique flamed pattern in the soft and cushy rubber pads. Finished off with a Maltese Cross emblazoned end cap and trim ring for that additional bad attitude look. This grip accepts the wildly popular ISO-Throttle boss, which greatly aids your hand on those long rides to the next rally. Sold in Pairs

Fitment:
Honda: VTX 1300/1800, Fury, Rune, VT750 (Ace, Aero, Phantom, RS & Spirit), VT 1300 Custom Line 10+ (Sabre, Stateline, Interstate)
Suzuki: Intruder 800/1400, S50, S83
Universal: 1" handlebars (requires removal of any ribs on OEM throttle sleeve).

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

Kuryakyns's new ISO�-Flame Grips have a unique flamed pattern in the soft and cushy rubber pads. Finished off with a Maltese Cross emblazoned end cap and trim ring for that additional bad attitude look. This grip accepts the wildly popular ISO-Throttle boss, which greatly aids your hand on those long rides to the next rally. Sold in Pairs

Fitment:
Honda: Rebel 250
Yamaha: Virago 750/535/250, V-Star 250
Can-Am: Spyder
Universal: 7/8" handlebars (requires removal of any ribs on OEM throttle sleeves).

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

Show Chrome Accessories Comfort Grips are easy to install, with CNC finish for extreme durability and chrome plated for a first class look.

These vibration dampening grips are ergonomically designed with a convex profile to fit the cup of your hand.The symmetrical rubber pattern provides you with total grip comfort reduces numbness, vibration and wrist fatigue in any position on the grip.

Comfort Grips are easy to install and utilize OEM throttle tubes.

For extra comfort on those long rides use Comfort Wrist Cruis™ (BB17-379C) on the right or left side (sold each).

Replace the stock grips for a custom look. Sold in pairs.
Fits most Yamaha/Kawasaki/Suzuki cruisers and other bikes with 1" handlebars (in control area)

These Chrome Billet Grips replace the stock grips for an ultra custom look and fit all popular Yamaha/Kawasaki/Suzuki cruisers with 1" diameter bars (at control/grip area)

Machined from 6061-T6 billet, Available beautifully chrome-plated or in black.

Beautiful, dynamic and comfortable? Yes in fact they are. These specially designed grips are contoured to fit a riders hand which eliminate the need to squeeze them with the force most billet grips require. The decorative flame milled design flows gracefully across the surface and the interlocking flames seem to flicker in the sunlight.

Fits all Honda 1" handlebars.

Fitment (known to fit the following models)
  Honda: Magna, Shadow Ace/Areo/Sabre/Spirit, VLX, VTX1300, VXT1800

Beautiful, dynamic and comfortable? Yes in fact they are. These specially designed grips are contoured to fit a riders hand which eliminate the need to squeeze them with the force most billet grips require. The decorative flame milled design flows gracefully across the surface and the interlocking flames seem to flicker in the sunlight.

Fits all Yamaha/Suzuki/Kawasaki 1" handlebars.

Fitment (known to fit the following models)
Yamaha: Raider, Road Star, Royal Star, V-Star 1100 Classic/Custom, V-Star 650 Classic/Custom, Venture, Warrior
Kawasaki: 1500/1600 Classic, 1500 Drifter, Mean Streak, 1500 Nomad, Vulcan 2000/800/900
Suzuki: Intruder LC 1500/C90, Marauder 1600/M95, Volusia/C50, M109R

Tired of cold hands when riding? These are wind proof and water proof!!

Slot openings for mirrors and cables; tapers down to a Velcro closure. The outside is made of water/wind proff nylon and hte inside is quilted insulated nylon. Has a plastic support to prevent sagging or closing while riding.

Available in black only.

It's hard to imagine any piece of cool metal feeling better in your hand. Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.

6232 is for:
  Honda: VTX 1300/1800, Fury, Rune, VT1100, VT750 (Ace, Aero, Phantom, RS & Spirit), VT 1300 Custom Line (Sabre, Stateline, Interstate), VLX, Magna
  Suzuki: Intruder 800/1400, S50, S83
  Universal: 1" handlebars (requires removal of any ribs on OEM throttle sleeves. If you want bar end weights, 6249 is a great choice.

Combining great style and comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO-pads permit air movement for added comfort in hot weather. All grips are sold in pairs.

Add the ISO-Throttle BOSS for more comfort! Other grip accessories (trim rings, end caps, end wieghts, etc) sold separately.

Kuryakyns's new ISO�-Flame Grips have a unique flamed pattern in the soft and cushy rubber pads. Finished off with a Maltese Cross emblazoned end cap and trim ring for that additional bad attitude look. This grip accepts the wildly popular ISO-Throttle boss, which greatly aids your hand on those long rides to the next rally. Sold in Pairs

Fitment:
Honda: VTX 1300/1800, Fury, Rune, VT750 (Ace, Aero, Phantom, RS & Spirit), VT 1300 Custom Line 10+ (Sabre, Stateline, Interstate)
Suzuki: Intruder 800/1400, S50, S83
Universal: 1" handlebars (requires removal of any ribs on OEM throttle sleeve).

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

Kuryakyns's new ISO�-Flame Grips have a unique flamed pattern in the soft and cushy rubber pads. Finished off with a Maltese Cross emblazoned end cap and trim ring for that additional bad attitude look. This grip accepts the wildly popular ISO-Throttle boss, which greatly aids your hand on those long rides to the next rally. Sold in Pairs

Fitment:
Honda: Rebel 250
Yamaha: Virago 750/535/250, V-Star 250
Can-Am: Spyder
Universal: 7/8" handlebars (requires removal of any ribs on OEM throttle sleeves).

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

If you liked our chrome ISO-Grips then you’ll love our new Black ISO-Grips. These powder-coated black grips dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort. Get total comfort with our matching throttle bosses. These grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO� pads permit air movement for added comfort in hot weather. The knurled accent ring adds a touch of class. All grips are sold in pairs. Add the ISO Throttle BOSS for more comfort! Accent rings are available in several colors to match your bike paint theme.