• Converts your diaphram spring clutch system to coil spring system
• Allows for more precise adjustment and smoother operation
• Increases the holding capacity of the clutch
• Utilizes the stock clutch hub, shell and clutch plates

• Designed to perform under extreme heat conditions
• Allow smooth, precise shifting
• 100% asbestos free
• Carbon fiber plates have high static and dynamic coefficient of friction for smooth positive engagement and release
• Kevlar plates have higher density compound for increased durability
• Bar flex plates made from sintered iron fused to high strength cores, are designed to run dry
• Steel plates are manufactured under strict quality control standards

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FLST 01-06;  FLSTC 2000;  FLSTC, FLSTC-I 01-06;  FLSTF 2000;  FLSTF, FLSTF-I 01-06; 
FLSTN, FLSTN-I 05-06;  FLSTS 2000;  FLSTS, FLSTS-I 01-06;  FLSTSC, FLSTSC-I 05-06; 
FXST 2000;  FXST STD, FXST-I STD 01-06;  FXSTS 00-06;  FXSTS-I 01-06

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FLHS L87-88;  FLHT 87-89;  FLHTC 87-88;  FLST 87-90;  FLSTC L87-89;  FLSTF 90-99;  FLSTN,FLSTC 90-99;  FLSTS 96-99;  FLTC 87-88
FXDB 1991;  FXR-2, FXR-3 99-00;  FXST 87-99;  FXSTC 87-99; FXSTS 90-99;  FXSTS L88-89

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXSTSB 95-97

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXSTD 2000;  FXSTD, FXSTDI 2001;  FXSTD, FXSTD-I 02-06;  FXSTD-SE 03-05

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXSTB 1999

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXSTB, FXSTB-I 00-06

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXRS Sport Edition 87-94

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FLST 2007, 09+;  FLSTC 07+;  FLSTF, FLSTF-I 2007;  FLSTSC, FLSTSC-I 2007;  FXCW 08-09;  FXCWC 08+
FXST STD, FXST-I STD 07+;  FXSTC 07+ 

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FLSTB 10+;  FLSTF 08+;  FLSTN, FLSTN-I 07+;  FXSTD, FXSTD-I 2007

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FXSTB, FXSTB-I 07-09

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: When ordering over stock length, the extra length is in the top line unless otherwise noted.

Fitment:
FLSTSB Cross Bones 08+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXSTS late '88-'89

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXSTS '90-'95

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXSTS '96-99

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: (has 90 degree elbow)
FXSTB, FXSTB-I '99-'09
FXSTD-SE '03-'05
FLSTFB '10+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLST, FLSTF-I '01-'07;  FLSTC, FLSTC-I '01-'09
FLSTF '01+;  FLSTN, FLSTN-I '05+;  FLSTF-SE '05-'06
FLSTS, FLSTS-I '01-'06;  FLSTSC, FLSTSC-I '05-'07
FXCW '08-'09;  FXCWC '08+
FXST Std, FXST-I Std '01+;  FXSTD, FXSTDI, FXSTD-I '01-'07;  FXSTS, FXSTS-I '00-'06

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLST '90;  FLSTC, FLSTF, FLSTN '90-'95
FXST, FXSTC '90-'95;  FXSTB 1995

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLSTN, FLSTC, FLSTF, FLSTS, '96-'00
FXST '96-'00; FXSTC '96-'99; FXSTD 2000; FXSTSB '96-'97

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FLST '86-'89;  FLSTC '87-'89
FXST, FXSTC '83-'89

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment:
FXSTC '08+;  FLSTSB Cross Bones '08+;  FLST '09+;  FLSTC '10+

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXSTS-SE '08-'09

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: FXSTC 2007