This beautifully chromed billet cover allows our Sub-Sonic Tach to be mounted on your front brake master cylinder or hydraulic clutch master cylinder. This cleans up your handlebar area and allows you to place the Tachometer in an easy to view location. Not just a mount, but an upgraded replacement for your stock master cylinder cover.

*Additional photos show Sub-Sonic Tachometer (#BA-7573-05, sold separately) mounted on master cylinder.

Fits the following models:
Suzuki: Volusia/C50 (pre 2007), 1500LC/C90, Intruder 800/S50, Intruder 1400/S83, Marauder 1600/M95

Baron's Big Air Kit adds substantial boosts to horsepower and torque, improving acceleration from idle to red line and releases a much throatier deeper base tone to your exhaust sound.

• Dyno-tested and flow-bench designed, kit will add substantial increases to horsepower & torque
• High Flow reusable filter and “BAK-Plate” dynamically increase air flow & velocity
• Maximizes overall performance and fuel efficiency
• Innovative design enhances and accentuates the V-Twin engine
• Set back, thin-line design does NOT interfere with rider’s leg
• Beautifully chromed and decoratively milled covers available in several designs
• Fuel injected bikes do NOT require Power Commanders or other EFI modifications if equipped with stock exhaust
• Complete with and Micron Rain Coat for wet weather riding
• Mounting hardware and easy to follow instructions are included for a do-it-yourself install

• Suzuki Boulevard C50/C50T

Remove the clutter from your engine. Kit includes block-off plates and all necessary hardware to replace your stock PAIR valve air injection system. It allows you to clean up the look of your engine while reducing backfire. Kit does not alter performance and does not require adjustments to EFI or carbureted models. Black finish blends in with engine. Can be easily installed by most owners.

Warning! Removal of this system may not be legal in your state.

Not legal for use on California models.

Bike Fitment:

• Suzuki Boulevard C50/C50T
• Suzuki Boulevard C90/C90T
• Suzuki Intruder 1400
• Suzuki Intruder 800
• Suzuki Intruder LC 1500
• Suzuki Marauder1600/M95 (04-05)
• Suzuki Volusia 800

Baron Engine Guards are designed to work with OEM windshields, lowers, and floorboards. Our large, open-hoop design gives excellent protection for your bike, while providing a great location for accessories like highway pegs. Guards bolt directly to your bike’s frame in minutes. Constructed from .095” wall, 1-1/4” diameter cold-rolled steel for ultimate strength, then finished off with smooth chrome plating for beauty.

Gangster fenders are our latest exercise in body styling. These fenders were inspired by '60s and '70s era muscle cars and truly fit the personality of your motorcycle. Curvature of the fender matches the profile of both wheel and tire. High quality, hand-laid fiberglass construction present you with a durable surface able to withstand the pounding beat of a V-twin engine.

Drilling for fitment, plus body work and paint required. Will support passengers up to 150 lbs.

• Increases rider’s foot and legroom
• Improves leg and knee comfort
• Five positions of adjustment
• 13” length, tapering from 4” wide down to 2-3/8” provides expanded foot positioning
• Beautifully chromed billet aluminum construction
• Narrow design allows greater cornering lean angles
• Easy to install
• Available in Flame or Solid styles
• Matching Passenger Short Boards are available

Mounting Brackets required. Sold separately. See related products below.

• Seven positions for comfort*: 7 position choices allows positioning for optimum comfort. Provide up to 6" more legroom.
• Multiple tilt angles*: Boards tilt to relieve stress in the thighs, calves and ankles by taking the flex out of the calf.
• Style: beautifully polished and finished with brilliant chrome. Available in "Enferno" or the more traditional "Solid" styles.
• Comfort: 8-½” x 3-½” surface area and vibration reducing anti-slip rubber pads provide comfort and solid foot support.
• Body control: Additional body control is provided by board's design, improving user confidence.
• Fold up: The boards fold up when not in use, adding an additional splash of brilliant chrome.
• Rider or Passenger: Usage depends on mount kit.
• Matching sets: Baron’s matching Rider Long Boards, offering similar adjustability, may be added to give you a matching set.

*Please note: Adjustability may vary by model depending on accessories and whether boards are used for rider or passenger.

Mounting Brackets required. Sold separately.

Fitment: C50/C50T, C90/C90T

Stud kits allow most Harley-style risers with standard ½” x 13 threads to be converted to mount on Honda, Yamaha, Suzuki and Kawasaki cruisers. All studs have one end that is ½”-13 x ¾” that threads into the riser’s base. The other end of the stud and the shoulder are machined to fit the triple tree of the different manufacturers.

• Includes 2 studs, 2 aircraft nuts, 2 washers and 2 jam nuts
• Studs thread into risers allowing mounting to metric triple trees
• Installation is easy and instructions are included.

Riser bolt kits have the following dimensions - check your bike for correct fitment prior to purchase:
Yamaha and some Suzuki models: (12mm x 20mm stud w/14mm D x 37mm shoulder)
Honda models: (12mm x 30mm stud w/10mm D x 11mm shoulder)
Kawasaki models: (10mm x 30mm stud w/10mm D x 11mm shoulder)

Remove the clutter from your engine. Kit includes block-off plates and all necessary hardware to replace your stock PAIR valve air injection system. It allows you to clean up the look of your engine while reducing backfire. Kit does not alter performance and does not require adjustments to EFI or carbureted models. Black finish blends in with engine. Can be easily installed by most owners.

Warning! Removal of this system may not be legal in your state.

Not legal for use on California models.

Bike Fitment:

• Suzuki Boulevard C50/C50T
• Suzuki Boulevard C90/C90T
• Suzuki Intruder 1400
• Suzuki Intruder 800
• Suzuki Intruder LC 1500
• Suzuki Marauder1600/M95 (04-05)
• Suzuki Volusia 800

Baron's unique light bar is designed to cradle your headlight, keeping the entire unit contained in a small area. Installs onto your stock front turn signal mount for an easy mount. Comes complete with driving lights and indicator lights and easy to follow instructions.

• Substantially improved illumination to the front and sides
• Increases your ability to see and be seen
• 50-watt halogen driving bulbs pierce the dark night
• Dynamic 20-watt marker lights brightly announce your turning intentions
• Adjustable forward projection angles allow riders to direct light where they need it most
• Distinctly styled to provide cascading effect to your front lighting array
• Brilliantly chromed billet aluminum construction 

Fitment

Yamaha: Road Star (99-05);  Road Star 1700 04-07;  Royal Star (96-01);  Royal Star Tour Deluxe (05-09);
              V-Star 1100 Classic (99-09, Canada 99+);  V-Star 650 Classic (98+)
Honda: VTX 1300 Retro (05-09)
Kawasaki: Vulcan 900 Classic 06+;  Vulcan 1600 Classic 03-08;  Vulcan 2000 04+
Suzuki: Volusia 01-04;  Boulevard C50/C50T 05+;  M109 06+

The sculpted styling of this handlebar brings out the classic heritage of today’s cruisers. The specially-designed bends, length and pullback relieve the stress and pain most riders suffer in the neck, shoulders and back, while the thick-walled tubing reduces vibration to the riders hands. As well, these bars provide additional leverage and a lower center of gravity that makes the bike easier to control and feel like it has lost a couple hundred pounds. Installs easily on most bikes using all stock lines and controls.

Dimensions: Dia. 1", Width 36", Rise 4 1/2", Pullback 13 1/2"

Known fitment:
Kawasaki: Vulcan 1500/1600 Classic, 1500 Drifter, 1500 Nomad, Vulcan 900 Classic
Suzuki: Volusia/C50 1500LC/C90
Yamaha: Road Star, Royal Star (99-01), Venture, V-Star 1100 Classic/Custom, V-Star 1300, V-Star 650 Classic/Custom

Our adapter has been redesigned for Suzuki C50/C90, Kawasaki Vulcan 900/2000 and Harley owners that have had tach bounce issues in the past. This adapter is the cure for your tach bouncing headaches!

• Provides correct RPM display
• Fits most accessory electronic tachometers
• Required for most two or four cylinder engines with single-fire ignitions
• Required for most bikes equipped with fuel injection
• Reduces needle fluctuation
• Integrated features allow use on ’08 Harley-Davidson models

Replace your rear shock linkage with our adjustable links. Adjust your rear suspension from stock to a 2" drop! Lowering steps available in 1" increments - set it wherever you want for the look you desire. Installs easily.

Swing arm bottoming can occur at the 2" setting. Heavier spring recommended. See our Performance Shock Spring.

Fitment:
Yamaha: V-Star 1100 Classic/Custom. V-Star 1300, V-Star 950
Suzuki: Volusia/C50

Ultra-trick choke knob cover fits most round, plastic choke knobs. Chromed billet aluminum, with a cool engine piston design. A Baron exclusive!

Universal fitment. Will not work on handlebar-mounted choke pulls. Very easy to install!

Fitment:
HD: Dyna, Softail, Sportster
Honda: Magna, Shadow Ace/Aero/Sabre/Spirit, VLX
Kawasaki: Mean Streak, Vulcan 1500/1600 Classic, 1500 Drifter
Suzuki: Intruder 800/S50, Intruder 1400/S83, Volusia/C50, 1500LC/C90. Marauder 1600/M95
Yamaha: Road Star, Royal Star, V-Star 650, Venture

Fork Bullets are an excellent way to dress up your forks while hiding your axle bolt and hardware at the same time. Each bullet slips onto the end of your fork leg and attaches with a compression set screw. Installation is that easy!

Fitment:

• Kawasaki Vulcan 800 Classic
• Suzuki Boulevard C50/C50T
• Suzuki Boulevard C90/C90T
• Yamaha V-Star 650 Classic (98+)
• Yamaha V-Star 650 Custom (98+)

Gangster fenders are our latest exercise in body styling. These fenders were inspired by '60s and '70s era muscle cars and truly fit the personality of your motorcycle. Curvature of the fender matches the profile of both wheel and tire. High quality, hand-laid fiberglass construction present you with a durable surface able to withstand the pounding beat of a V-twin engine.

Drilling for fitment, plus body work and paint required. Sold individually.

• Use what the professionals use to cover cables, hoses and wires quickly and inexpensively
• Cover your wire harnesses, handlebar wiring, brake lines, throttle lines and fuel hose
• Expands easily to fit over ends for smooth installation and long lasting protection
• Chrome kit - the Dynamic chrome covering adds a bright, shiny appearance
• Fits snugly for a clean, custom look
• More than enough product to do your entire motorcycle
• Can be used to customize any motorcycle
• Kit includes: 6-ft of 1/2”, 20-ft of 3/8”, 8-ft of 1/4” diameter, expandable covering plus zip ties and black and clear shrink tubing. (chrome kit has chrome zip ties).

• Fits all H-D, American or Metric V-twins
• Accurate 0-8000 RPM data every biker needs
• Beautifully chromed sleek bullet-shaped housing
• 7-color LED illuminated face for extra attitude - also available in black or white face
• Integrated bar clamp allows nearly limitless mounting on 1” handlebars
• Black and white face are backlit and are also available for 1 1/4" and 1 1/2" handlebars
• Easy install – includes complete hardware kit
• Easy to follow instructions
• Extra long wire leads
• Includes Tach Adapter for single-fire ignition
• Fits most 2 or 4 cylinder motorcycles
• 2-7/8” D x 3-1/2” L compact housing
• Weather resistant for long life
• Great function – Stylish looks – Awesome value!

Beautiful, dynamic and comfortable? Yes in fact they are. These specially designed grips are contoured to fit a riders hand which eliminate the need to squeeze them with the force most billet grips require. The decorative flame milled design flows gracefully across the surface and the interlocking flames seem to flicker in the sunlight.

Fits all Honda 1" handlebars.

Fitment (known to fit the following models)
  Honda: Magna, Shadow Ace/Areo/Sabre/Spirit, VLX, VTX1300, VXT1800

Beautiful, dynamic and comfortable? Yes in fact they are. These specially designed grips are contoured to fit a riders hand which eliminate the need to squeeze them with the force most billet grips require. The decorative flame milled design flows gracefully across the surface and the interlocking flames seem to flicker in the sunlight.

Fits all Yamaha/Suzuki/Kawasaki 1" handlebars.

Fitment (known to fit the following models)
Yamaha: Raider, Road Star, Royal Star, V-Star 1100 Classic/Custom, V-Star 650 Classic/Custom, Venture, Warrior
Kawasaki: 1500/1600 Classic, 1500 Drifter, Mean Streak, 1500 Nomad, Vulcan 2000/800/900
Suzuki: Intruder LC 1500/C90, Marauder 1600/M95, Volusia/C50, M109R

Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s cruisers and as the best possible fit for most riders.

Each handlebar is bored and dimpled to allow for internal wiring. Requires longer control cables, but accepts all stock 1" type controls. Fits bikes with riser spacing of 3-1/2" to 4". Works with most stock and aftermarket risers. It is recommended that you check your local codes for handlebar height to be sure these bars are legal in your area.

Dimensions: Diameter: 1-1/4", Width: 37", Rise: 17", Pullback: 12", Center Width: 10"

Known Bike Fitment: (Honda & Suzuki models require minor drilling)

• Honda: Magna, Shadow Ace/Sabre/Spirit
• Kawasaki: Mean Streak, 1500 Drifter, 1500 Nomad, Vulcan 1600 Classic, Vulcan 2000, Vulcan 90
• Suzuki: Intruder 1400/S83, 800/S50, Volusia/C50, 1500LC/C90, Marauder 1600/M95
• Yamaha: Road Star 1600/1700, Royal Star 96-01, V-Star 1100 Custom/Classic, V-Star 650 Custom/Classic

Kickback Risers provides immediate relief to those stretching to reach their handlebars. Our 4" risers provide approximately 1-1/2” of pullback. This repositioning of the rider's grip point reduces the stress and pain most riders feel in their neck, back and shoulders. Also, by relocating the bars closer to the rider the motorcycle becomes much easier to steer and control.

Each riser has its own individual stylish cap with mounting hardware, which lightens the look of the front end and allows mounting of a tachometer or other accessory.

Installs on most bikes with a 1" handlebar clamping area and works with most stock control lines and cables with simple re-routing on most models. 1/2" diameter mount bolts allow these risers to mount in most triple trees

• Sleek beautifully chromed housing
• Accurate 0-8000 RPM data every biker needs
• Mounts easily in multiple locations and positions
• Super bright LED illumination for night riding
• Choice of black or white face
• Available for 1" handlebars
• Compact 40mm D x 3-1/2” L housing
• Hardware and EZ-follow instructions included
• Includes Tach Adapter for single-fire ignition
• Fits most 2 or 4 cylinder motorcycles

• Billet aluminum housing with removable bezel
• Housing specifically accepts stainless steel electronic tachometers or speedometers with body dimensions of 2.4” (61mm) diameter and a depth of 2.3” (59mm), along with bezel diameters of 2.64” (67mm)
• Integral mount for 1” or 1-1/4” handlebars available - See related products below for 1" clamp Gauge Housing (BA-7575-00)
• Housings can be mounted in multiple positions and locations
• Wires exit at the rear of the housing and a rubber wiring grommet is included
• Installation is easy and instructions are included
• Does not work with gear driven gauges

These polished stainless steel brackets allow you to add custom marker lights to your bike quickly and easily. Accepts most aftermarket marker lights.

Available in 90-degree bend, flat or 67-degree bend. Each set includes two mount tabs. 90-degree bend is commonly used for front mounts, and flat for rear.

67-degree bend set:
   Yamaha fitment: Install in existing fender holes to either side of your stock brake light. Works very well with our Laydown License Kit (BA-3105U).
    Kawasaki fitment: These allow you to add custom marker lights to the front of your Mean Streak quickly and easily.

• Use what the professionals use to cover cables, hoses and wires quickly and inexpensively
• Cover your wire harnesses, handlebar wiring, brake lines, throttle lines and fuel hose
• Expands easily to fit over ends for smooth installation and long lasting protection
• Chrome kit - the Dynamic chrome covering adds a bright, shiny appearance
• Fits snugly for a clean, custom look
• More than enough product to do your entire motorcycle
• Can be used to customize any motorcycle
• Kit includes: 6-ft of 1/2”, 20-ft of 3/8”, 8-ft of 1/4” diameter, expandable covering plus zip ties and black and clear shrink tubing. (chrome kit has chrome zip ties).