• Bolts onto side covers
• Sold in pairs
• Follows the shape of your coves
• Adds a stylish touch
  

Shiny chrome cover to hide that nasty caliper.

Covers the left side of the frame behind the motor. Elongates the look of the motor with an addition of chrome where it's sorely missing. Easy installation, low-cost, immediate gratification.

• Allows viewing of meter adding a beautiful piece of chrome.
• Glued on with silicone (supplied)

This cover actually comes down 2" below the Drive Shaft and extends back and slightly below the rear hub. The bottom portion has decorative cut outs and the Custom World Eagle design to match the rest of the Custom World Accessories. Also looks great with the Left Frame Cover.This cover actually comes down 2" below the Drive Shaft and extends back and slightly below the rear hub. The bottom portion has decorative cut outs and the Custom World Eagle design to match the rest of the Custom World Accessories. Also looks great with the Left Frame Cover.

Adjustable forward and backward by 3 inches. Folds forward for passenger access. Solidly bolted to the bike. Compatible with Custom World hard bags and Leatherlyke. Fits with stock seat. Adjustable forward and backward by 3 inches. Folds forward for passenger access. Solidly bolted to the bike. Compatible with Custom World hard bags and Leatherlyke. Fits with stock seat.

Lower the passenger’s pedals 4� for better comfort.

• Choose your comfort level with these revolutionary adjustable pegs.
• Includes foot pegs.
• Billet aluminum.
  

• Billet aluminum.
• Designed specifically for each model.
• Show chrome finish.

• Easy installation.
• Replace OEM footpegs.
• Chrome billet aluminum.
• Multi adjustable for exceptionnal comfort: Angle; Rotation; Fore / Aft
• Holes drilled for hellrest.
• Vibration damping rubber.
• Bolts to prevent scraping in corners.
• Spring mounted.
• Dimensions: 4.25� x 11.25�

• Sold in pairs.
• Chromed billet aluminum.
• Fit on OEM floorboards.
• Pivots back and forth 5� or 12.7 cm.
• Anti-vibration rubbers.

• Designed to reduce the space between the fender and the saddlebag
• No saddlebag support required
• Protective cover included
  
• Exceptional finish
• Holds it's shape
• Extra large opening
• Leather and ABS
  
• 11.5 H x 8.5 W X 18 L

• Show chrome finish
• 3 sizes available: 3", 4", and 5"
• 1-1/2 pullback

These side arms can be used to mount both square and round sissy bars by Custom World. All the bolts required to mount the hardware to your bike are included. Also included are spacers to allow the mounting of the backrest without the luggage rack and nylon washers to protect the fender paint.

If you want to give that "solo" look to your bike without buying a new rear feander, here is the solution for you. Remove the passenger pillion and put this bueatifully chromed solo rack in it's place.

• Made to add style to your bike.
• Includes mounting kit.

Custom World International's chrome plating is "triple chrome" or "show chrome" which means that the part is first polished, then copper plated, polished, nickel plated, and finally, chrome plated. This process, while expensive, gives a lasting beauty. Add some chrome to your front end with the CWI Radiator Cover.Custom World International's chrome plating is "triple chrome" or "show chrome" which means that the part is first polished, then copper plated, polished, nickel plated, and finally, chrome plated. This process, while expensive, gives a lasting beauty. Add some chrome to your front end with the CWI Radiator Cover.

Custom World International's chrome plating is "triple chrome" or "show chrome" which means that the part is first polished, then copper plated, polished, nickel plated, and finally, chrome plated. This process, while expensive, gives a lasting beauty. Add some chrome to your front end with the CWI Radiator Cover.Custom World International's chrome plating is "triple chrome" or "show chrome" which means that the part is first polished, then copper plated, polished, nickel plated, and finally, chrome plated. This process, while expensive, gives a lasting beauty. Add some chrome to your front end with the CWI Radiator Cover.

Custom World International's chrome plating is "triple chrome" or "show chrome" which means that the part is first polished, then copper plated, polished, nickel plated, and finally, chrome plated. This process, while expensive, gives a lasting beauty. Add some chrome to your front end with the CWI Radiator Cover.Custom World International's chrome plating is "triple chrome" or "show chrome" which means that the part is first polished, then copper plated, polished, nickel plated, and finally, chrome plated. This process, while expensive, gives a lasting beauty. Add some chrome to your front end with the CWI Radiator Cover.

• Here's a nice shiny piece of chrome to spice up your bike and make it set apart from the other bikes
• Must drill fender to install
  

• 0-8000 RPM
• Lumiglow available in white face only
• Installed in a chrome billet aluminum case
• Available for 1", 1 1/4" and 1 1/2" handlebars
• Adapter available to make tachometer compatible with twin coils

• 0-8000 RPM
• Installed in a chrome billet aluminum case
• Available with a black or white face
• Available for 1", 1 1/4" and 1 1/2" handlebars
• Adapter available to make tachometer compatible with twin coils

Replaces the original black plastic covers with two beautiful chrome covers.Replaces the original black plastic covers with two beautiful chrome covers.

Square sissy bar with pads. Several styles of pads, including: mini, standard and large. Mounting kit required.Square sissy bar with pads. Several styles of pads, including: mini, standard and large. Mounting kit required.

Beatiful completement to the Custom World round back rest. Comes in choice of smooth or Eagle logo style.

• Tubular bar is wider at the top
• Different look for modern motorcycles
• Two sizes of pad available with optional studs
• 3 inches of adjustment at the top for personalized comfort for the passenger.

• Compatible with CWI backrests as well as others with exterior mount bolts.
• Made for CTR to CTR distance of 1 1/4" to 2 3/8"
  making them compatible with most backrests.
• They move outwards to ease access.
• The angle is adjustable to work with most backrests.
• Mount kit included for CWI and certain OEM backrest.

Attaches to the Custom World mount kit. Replaces backjrest when you don't have a passenger (and it's still handy for the occasional hitchicker).

• Show chrome finish
• 3 sizes available: 3", 4", and 5"
• 1-1/2 pullback