• New metric cruiser engine kits are the only 100% complete kits on the market
• Every specialty fastener used on these bikes is reproduced in stainless steel and polished to a mirror finish
• To help protect the finish on your bike - whether it be chromed, painted or powder coated - kits include special small washers that fit under the head of all M6 engine cover bolts.
• Includes bolts for -Generator cover, clutch cover, timing cover, pulley cover, left side transmission cover, top and side lifter block screws, cylinder side screws, air cleaner , case bolt, oil lines, clutch cable arm and rocker boxes
  

Cover that nasty caliper with this bright shiny chrome cover.

• Fits under the dash.
• Machined from aluminum and formed to follow the curve of your gas tank

This part replaces the Corbin seat bracket to give your bike that unique personal look. These new Seat Brackets are made from ASTM A36 Material that has been Laser cut, polished and Bright Chrome Finished.

Note: you will need KM-208 if you have the 6 degree triple trees (part number KM-283)

• Triple chrome-plated fender trim features square nose sual-rail look
• Blends with the fender striping as though it should have been there all the time
• Does not include emblems

This classic fuel shut off know gives your shut off valve assembly a custom look.

Knob only - cover sold separately.

Fitment: VT1100 & VT750 Shadows (not Aero's), VTX1300

• Chrome oil cap with attached dip stick. Replaces OEM.
• Use with existing OEM o-ring
• Fits: Both Retro and Standard VTX 1300

Pair of stamped steel chrome covers to cover the black swing arm area. Attaches with double sided tape provided.

Chromed stamped steel Radiator Grille replaces OEM on bike to give the radiator a dazzling chrome finish without affecting radiator air flow.

Fits with Show Chrome Accessories Highway Bars (may not fit with some after market bars).

These chrome covers turn the top of your otherwise boring steering head pivot and fork tops into a chromed work of art!

Fit 5/8" nut

A chromed stamped steel piece to cover the front brake caliper. Created in the popular raised chrome design.

Mounts easily with hardware included.

Updated design of the popular Mesh Radiator Grille for the VTX1300 to incorporate a scoop lower cowl. It incorporates the same great protection for your radiator but with an updated eye-catching curved look. This special curved chin design adds a custom look to your Honda VTX1300 2003-2009.

Manufactured of steel and then chrome plated, this Mesh Radiator Grille is a must have.
Bolts on to existing mounts with supplied hardware, making installation easy.

Fits with Show Chrome Accessories Highway Bars (may not fit with some after market bars).

Beautiful chrome accent features the unique "V" design. Beautiful chrome accent features the unique "V" design.

Fits:

Set of 4 CNC covers for drive shaft bolts.

Fitment: VTX1300/1800, Valkyrie, VT1100, VT750 Aero & Spirit C2

Show chrome finish Smooth, Tear Drop or Free Spirit raised eagle design master cylinder covers are a great finishing touch to set off those handlebars. Sold as a pair (some have singles available).

Fitment: VTX 1800, VTX 1300, VT1100 (87-96), GL1500, GL1800, Royal Stars

Replaces original OEM face clamp cover with bright, chrome replacement.

Fitment: Most Honda Cruisers

Show chrome finish Smooth or Free Spirit raised eagle master cylinder cover is a great finishing touch to set off those handlebars. Sold as each

Fitment: RoadStar, VLX, VT750, VF750, VTX1300, VT1100 (97+)

Vantage Horn Covers are constructed of lightweight ABS with a shiny chrome finish. The stylish design of the Vantage Horn Cover hints at movement without affecting the resonance of the horn.

Easy to install with no tools necessary, the Vantage Horn Cover snaps on and covers up the unattractive black OEM horn. With its two clip inner tapered design; it is designed to cover both 3” and 3-1/4” horns for most Kawasaki and Yamaha Cruisers. The Vantage Horn Cover gives your bike a custom look at a fraction of the cost of other after market horn covers. Snap one on today and turn your OEM horn into a Show Chrome Accessories horn.

Fits 3 1/2" round horns - most Honda Cruisers.

This stamped steel chrome piece fits over the Honda black drive shaft for a beautiful chrome finished look. Easily and securely mounts with double sided tape.

Fits Honda VT750 Aero & Spirit C2, VT1100, VTX 1300 & 1800 models.

Your buds are going to envy you when they see these super custom chrome and rubber covers on your stock boards. Wow, what a difference! Quick and easy to install and economical too.Your buds are going to envy you when they see these super custom chrome and rubber covers on your stock boards. Wow, what a difference! Quick and easy to install and economical too.

Conceal that unsightly front axle and ugly bottom hardware in a new and stylish way. Starting with a three-pound piece of 6061-T6 billet aluminum, we CNC machine this into a bullet-shaped cover with a final weight of 3/4 pound each! Aeromach's Fork Bullets slide easily over the bottom of the front lower legs and grip tightly with two stainless steel set screws. Extreme eye catcher!

AM-5000C-05 Includes stainless steel bolt kit (AM-5005) for applications that replaces the four pinch bolts on the forks. Honda models:  VTX 1300 R/C, VLX 600, Up to 2001 750 ACE, Up to 2001 1100 ACE/Aero, Up to 2001 1100 Tourer, Up to 1999 Valkyrie (not Interstate) & Up to 2001 Sabre. Victory: Kingpin.

Contains 2 covers. One for brake and one for clutch master cylinders.  Smooth chrome finish.

Classic horn Covers are constructed of lightweight ABS with a shiny chrome finish. The design of the cover is a classic.

Easy to install with no tools necessary, it snaps on and covers up the unattractive black OEM horn.  It is designed to fit 3-1/2” horns on most Honda Cruisers at a fraction of the cost of other after market horn covers. Snap one on today and turn your OEM horn into a Show Chrome Accessories horn.

Fits 3 1/2"" round horns - most Honda Cruisers and other 3 1/2" horns

This cover actually comes down 2" below the Drive Shaft and extends back and slightly below the rear hub. The bottom portion has decorative cut outs and the Custom World Eagle design to match the rest of the Custom World Accessories. Also looks great with the Left Frame Cover.This cover actually comes down 2" below the Drive Shaft and extends back and slightly below the rear hub. The bottom portion has decorative cut outs and the Custom World Eagle design to match the rest of the Custom World Accessories. Also looks great with the Left Frame Cover.

• Raised teardrop design gives that custom look everyone wants
• Easily attach to stock turn signals using double-sided adhesive tape provided (face mount visors)
• Sold in pairs

For Cruisers with smooth face turn signals.

Fitment: Yamaha Stars, VMax, Honda late cruisers with smooth face lenses.

sold as a pair.

Fitment
VTX1800 
VTX1300 
Shadow Aero - VT750C
Shadow Sabre - VT1100C2/VT1100C2A

This chromed billet cover in the fluted design complements the entire line of fluted accessories.This chromed billet cover in the fluted design complements the entire line of fluted accessories.

These backrest covers are beautifully CNC water jet cut from 304 stainless and then polished to a mirror finish, has the same appearance as chrome and will never peel or flake.

*** Proudly Made in the USA ***

This part replaces the Corbin seat bracket to give your bike that unique personal look. These new Seat Brackets are made from ASTM A36 Material that has been Laser cut, polished and Bright Chrome Finished.

This attractive chrome choke knob cover installs easily without removing or modifying the stock choke knob.

Fits:
Honda: VTX1300, '04-'05 
           Shadow Aero 750 
Kawasaki: 800 Vulcan and 1500 Vulcan (single carb only) 
Suzuki: '98-'05 Intruder 1500LC/Boulevard C90 
Yamaha: Road Star 1600, Royal Star Venture, V-Star 1100, and V-Star 650 
Harley: For 88-04 XL models and 90-04 Big Twin

Your friends are going to think you went out and bought a whole custom swingarm! This item will really set you apart and is the perfect complement to Kuryakyn's drive shaft cover, as well.Your friends are going to think you went out and bought a whole custom swingarm! This item will really set you apart and is the perfect complement to Kuryakyn's drive shaft cover, as well.

These are beautifully cut by a precision CNC water jet machine, and then chrome plated. They are extremely durable and will keep their mirror finish even after being blasted by gravel and sand from the road.

These will completly transform the front end of your bike. Covers the lower fork leg, the ugly axle bolt and other miscellaneous hardware, also covers the brake calipers.

Installation is simple using the supplied universal fork clamps and hose clamps. Includes all necessary mounting hardware including rubber to protect your forks.

These fit 95% of ALL bikes with NON INVERTED FORKS!

Note: VTX1300C/R owners should use KM-234 instead, this is identical except for a pre-cut notch to accomodate the larger than normal fender mount strut on the VTX1300's.