• A necessity for any full-custom project; a huge impact in a high profile area on any custom job
• CNC-machined to a jewel-like finish, then polished and Cobra Chrome plated
• Mounting holes on small frame measure 5 3/4" x 2 3/4" on center; 5 3/4 " x 3 1/4" on large frame
• Made in the U.S.A.

• LED light in the center of each bolt; one red and one blue
• LEDs flash - great for wiring to brake lights
  

• LED light in the center of each bolt; one read and one blue
• LEDs flash - great for wiring to brake lights

This slick little curved license plate frame puts the finishing touches on the Tombstone Taillights, P/Ns 4991 or 4992. It accepts 4" x 7" plates and fastens neatly to the existing holes on the base plate. The two-piece design encapsulates the plate and looks awesome from any angle.

 Get ready for the compliments when you streamline the back fender and add that custom top class look to your RoadStar. Designed to flow around your stock taillight this kit fully replaces that stock bulky turn signal AND license plate bracket.

Note:Note:

• Yamaha OEM-Mount model-Fits stock Yamaha license plate mounting brackets. Top quality extra thick case-hardended chrome flat washers and chrome bolts are, of course, included in this kit to ensure a rock-solid yet beautiful mount.
• Hanging-Mount model-Fits brackets on Yamaha bobbed fenders. Top quality extra thick case-hardended chrome flat washers and chrome bolts are, of course, included in this kit to ensure a rock-solid yet beautiful mount.
• Direct Fender-Mount model-Fits all fenders with the Harley 3-holes "pyramid" mount pattern. It incorporates two different rubber mount bushings. One is a custom contoured rubber "wedge" bushing for a slightly up-tilted mount. The other is a thinner rubber mount bushing for a flush lay-down style mount. Top quality stainless steel bolts, flange-nuts, and chrome bolts are, of course, included in this kit, assuring a rock solid fender mount. Also included is a special ball-end allen-wrench for ease of installation.

Note: Note:

• Yamaha OEM-Mount model-Fits stock Yamaha license plate mounting brackets. Top quality extra thick case-hardended chrome flat washers and chrome bolts are, of course, included in this kit to ensure a rock-solid yet beautiful mount.
• Hanging-Mount model-Fits brackets on Yamaha bobbed fenders. Top quality extra thick case-hardended chrome flat washers and chrome bolts are, of course, included in this kit to ensure a rock-solid yet beautiful mount.
• Direct Fender-Mount model-Fits all fenders with the Harley 3-holes "pyramid" mount pattern. It incorporates two different rubber mount bushings. One is a custom contoured rubber "wedge" bushing for a slightly up-tilted mount. The other is a thinner rubber mount bushing for a flush lay-down style mount. Top quality stainless steel bolts, flange-nuts, and chrome bolts are, of course, included in this kit, assuring a rock solid fender mount. Also included is a special ball-end allen-wrench for ease of installation.

• Made from solid steel, then polished and chrome plated
• Easy bolt-on installation; no drilling required
• Has minor scratch.
  

• Billet aluminum license plate frame available in chrome, black and carbon fiber
• Programmable LED display allows you to create custom messages and scrolling speeds
• Simply install software, plug in the cable and connect it to the RAT infrared programmer
• Programmer fits in your pocket or on your keychain;allows you to transfer up to four personal messages (one at a time) from your computer to the license plate frame anywhere and anytime
• LED display can be mounted to the top or bottom of license plate; also acts like auxiliary brake light
• Easy three wire installation; fits most 4" X 7" license plates
• Includes LED license frame, RAT programmer, software program, serial cable and mounting hardware

This awesome assembly does it all. Our custom LED Cat Eye light offers built-in brake flasher, amber turn signals, running light and HID-look LED license plate light all in this one compact unit. Plus, we integrated it into a beautifully chromed, billet aluminum license mount and frame.

This part was designed to be used with our custom fenders. It is not a direct replacement for the stock taillight assembly. If used on a stock fender, body work will be required to fill holes left by the stock system. Some stock applications will require more work than others. Also works well with Baron's custom fiberglass fenders.
Note: Will not fit VStar 650/1100 Custom models

• Precision-manufactured from billet aircraft alloy aluminum; then anodized to preserve the finish
• Feature highly detailed full-color logos that are fade-proof, waterproof and protected by a clear polycarbonate coating used in jet fighter canopies
• 7/16 inch head, 3/4 inch thread reach; sold in pairs with nuts and wahers included
• Made in the U.S.A.

Chrome die-cast frame with 8 red LEDs provides added safety with added visibility from behind.

Also contains 4 white LEDs for license plate number visibility. LED’s are dual functioning as running and brake lights.

Fits standard 7" x 4" plates.

Chromed plated ABS Multi Functional LED License Plate Holder for standard 7” x 4” plates.

Frame acts as a running light, brake light and turn signals.

Chrome plated ABS Dual Function Raised License Plate Holder with 8 bright red LEDs used for running and brake lights and 4 white LEDs to illuminate the license plate.

All necessary mounting hardware and electronic hook ups included.

Fits standard 7” x 4” mororcycle plates.

This attractive and functional license plate holder accommodates 7" x 4" to 8 1/2" x 4 3/8" state license plate sizes.

Die cast chrome plate and holder incorporates 3 LED light functions. The top center lens has eight LED lights and can be used as an auxiliary running or brake light. The two side amber lenses have four LED lights each and can be used as auxiliary turn signals.

Mounts to most license plate holders.

Outer frame measures 9-1/8" L x 5-1/8" H x 3/4" D 1" width border. Clear acrylic front panel to protect license plate.