- Move the mouse over the thumbnail to see bigger pictures.
- To see the shipping cost, if any, just add the items to the shopping cart and then enter your zip code.
- The wrenches "
" indicate the difficulty level for installing the product. - Can't find what you're looking for? Click here to send us and an email
The EDGE Brackets system is easy to install and once installed no tools are needed to remove your saddlebags. EDGE Brackets are installed by removing the two bolts from your fenders and replacing the two bolts with the EDGE Bracket bolts and hardware which are called "keepers". The EDGE Bracket is then bolted on to your saddlebag and simply slides right on to the keepers.
Now with the latest Generation III (G3) EDGE Brackets you will have the most versatile saddlebag system ever developed. Made from solid 10 gauge steel, the brackets are black powder coated for durability and good looks. All the hardware provided is stainless steel that is polished to a show room finish. The Generation III EDGE Brackets are completely adjustable in every direction allowing you to place your bags on the bike exactly where you need them not only getting you the exact look you desire, but also helping to avoid many undesirable turn signal relocation requirements. Simply slide the bracket on the stainless steel keepers, turn your locking key and the brackets and your expensive saddlebags are safe, securely locked onto your bike. Why settle for just one set of saddlebags? With EDGE Brackets your saddlebags are interchangeable allowing for multiple sets of saddlebags to be used.
Here are some key features available with the Generation III EDGE Brackets:
- Patented design
- Fast installation and removal.
- No tools required.
- Secure lockable system to keep your bags safe.
- Your bike keeps a showroom look while your bags off.
- Completely adjustable system. (NEW)
- Once mounted the bags can be moved on most bike models front to back without redrilling holes in the saddlebags. (NEW)
- In most cases the G3 EDGE Brackets can be moved and adopted from one bike to another without purchasing completely new set. Only a bolt and keeper kit for the new bike may be required. (NEW)
- Top quality design and fabrication with attention to every detail for a superior product.
Notes:
- Size recomendation:
- Use part numbers ending in 106 for small, medium, slanted or large saddlebags with minimum 15" width at installation point. Recommended for medium or large saddlebags over 20 inches long.
- User part numbers ending in 105 for small, medium or slanted saddlebags up to 20-22" in width.
- Saddlebags at least 16" or wider at the mounting point are required for this bracket
- Turn signal relocation may be required for EDGE Brackets applications depending on bracket placement as well as size and style of saddlebags.
- Backrest adaptor kit p/n GB-BK-Y-RS is required if you have a sissybar installed.
- Please make sure when mounted, the saddlebags have sufficient clearance to the seat, suspensions, exhaust and other vital motorcycle components.
- Keep throw-over saddlebags from getting tangled in the rear wheel
- Attaches to existing mounting points for easy installation
- Made from sturdy chromed steel
- Made in the USA
Usually ships next day
Easy Brackets are an innovative two point docking system that allows the quick and easy installation and removal of saddlebags. They use two existing bolts holes in the fender rail of the motorcycle. By replacing the existing bolts with the docking posts and longer bolts provided in each kit, the Easy Brackets can then be instantly installed and locked into place. Because they are made specifically for your motorcycle model, you will receive all of the correct hardware with your order. The docking posts and bolts are especially designed to work perfectly with your motorcycle, eliminating the hassles of adding spacing washers to either line up the docking posts or to achieve a good, tight fit. Easy Brackets are an innovative two point docking system that allows the quick and easy installation and removal of saddlebags. They use two existing bolts holes in the fender rail of the motorcycle. By replacing the existing bolts with the docking posts and longer bolts provided in each kit, the Easy Brackets can then be instantly installed and locked into place. Because they are made specifically for your motorcycle model, you will receive all of the correct hardware with your order. The docking posts and bolts are especially designed to work perfectly with your motorcycle, eliminating the hassles of adding spacing washers to either line up the docking posts or to achieve a good, tight fit.
If you want to convert your saddlebags to an easy-to-carry piece of luggage, be sure to check out the Easy-Tote system. It's a single strap with special docking posts that connect together the saddlebags when they're off the motorcycle, making them easy to carry.
In stock
Usually ships next day
Chrome steel supports mount to rear fender bracket with new hardware.
Holds saddlebags away from brake caliper, swing arms and rear tire.
No drilling required. Additional hardware may be required to install if an aftermarket backrest has been installed.
Designed to help keep saddlebags off the fender sides and allow clearance for swingarm movement.
Usually ships in 7 days