Handlebars for VTX 1300
Search by part # or name:
 
  • Move the mouse over the thumbnail to see bigger pictures.
  • To see the shipping cost, if any, just add the items to the shopping cart and then enter your zip code.
  • The wrenches "" indicate the difficulty level for installing the product.
  • Can't find what you're looking for? Click here to send us and an email
Aeromach Knuckle Levers
Write a reviewAdd it to your garage
Bookmark and Share

These chrome Knuckle Levers will add some "attitude" to your bike. These aggressive levers are CNC machined from T6 extruded billet aluminum.

Sold as a pair.

Fitment:
Fits: '88-'07 Shadow VT600; '98+ Shadow VT750 (All Models); '94-'04 Magna 750; '91-'06 Nighthawk CB750; '95-'07 Shadow VT1100/C2/C2-2/T; '97-'07 Shadow VT1100C; '03-'09 VTX1300 (All Models); '04+ Shadow VT750 Aero/Spirit/Phantom/RS; '09+Fury (All Models); '10+ VT1300 Custom Line (Sabre/Stateline/Interstate)

 

 

 

List Price
Your Price
info
Black for Honda with cable clutch (see fitment info) - pr (1988-present)
$187.95
$169.95
Add to cartIn stock
info
Chrome for Honda with cable clutch (see fitment info) - pr (1988-present)
$187.95
$169.95
Add to cart
Aeromach 4" Pullback Risers
Write a reviewAdd it to your garage
Bookmark and Share

These 4 inch Pullback Handlebar Risers are designed to fit Honda VTX1300R.

The Pullbacks place your hands into a natural comfort zone by raising the bars up 2" from the stock location.

The Aeromach risers place your hands 1-1/2" closer to you from the stock position, while allowing you to retain your stock throttle and brake cables.

The diameter handlebar they fit is 1 inch.
 
Sold in Pairs

List Price
Your Price
info
Chrome for VTX 1300 R
$164.72
$142.95
Add to cart
Bikers Choice Custom 1 1/2" Fat Pullback Bars
Write a reviewAdd it to your garage
Bookmark and Share

Chrome Plated, 1 1/2" diameter (controls area is still 1")

Made in USA

Fitment - Honda VTX -  riser spacing is 130mm center-to-center (will also fit Victory's with 130mm spacing)

List Price
Your Price
info
Chrome 7" pullback, 7" riser, width 33.5" - Honda VTX and Victorys with 130mm spacing
$229.95
$209.95
Add to cartIn Stock
Drag Specialties 1 1/2 inch T-Bar Handlebars
Write a reviewAdd it to your garage
Bookmark and Share
  • The ultimate handlebar, designed for maximum comfort
  • Brilliantly show-chromed
  • Accepts standard 1 inch controls
  • Also available in 1 1/4 inch (listed separately)
  • Made in the U.S.A.
Fitment: Honda VTX and other bikes with 130mm riser spacing and thread pitch of M12 x 1.25
List Price
Your Price
info
Radius -7" tall, 7" pullback, 33.5" wide - risers with 130mm spacing
$224.95
$209.95
Add to cartUsually ships next day
info
Super Radius -8" tall, 15" pullback, 33.5" wide - risers with 130mm spacing
$224.95
$209.95
Add to cartIn stock
Kewlmetal Pullback Risers
Write a reviewAdd it to your garage
Bookmark and Share

These gorgeous sculpted chrome billet risers move your stock handlebars back and lay them down 13 degrees from the stock position. This moves the hand grips back 2.25 inches and gives your front end a whole new look and feel greatly increasing rider comfort. The stock cables and wires all reach so no need to replace anything!

KM-370 are the same as KM-195 Risers with 1 inch additional rise. These gorgeous chrome risers move your stock handlebars back and lay them down 10 degrees from the stock position. This moves the hand grips back 2.0 inches and up 1 inch. You WILL need longer cables with these risers!

These bolt on in minutes! Mounting hardware included.

List Price
Your Price
info
For VTX1300C
$159.95
$147.95
Add to cart
info
Plus 1 inch for VTX1300C
$199.95
$169.95
Add to cart
Kuryakyn Handlebar Control Covers
Write a reviewAdd it to your garage
Bookmark and Share

Cover up unsightly housings & create a smooth, full-custom look with these clamshell-design chrome covers. They install easily & encapsulate the stock housings without interfering with control functions. They're an awesome accent to ISO-Grips & our custom mirrors. Offered for many applications with more on the way. Sold in pairs.

9184 Fits: ‘10+ VT1300 Custom Line (Sabre/Stateline/Interstate), ‘09+ Fury, all  VTX1300, all VLX600, ‘99+ VT750 Ace/Aero/Phantom/RS/Spirit & other Late Model
Hondas without choke on left handlebar control

9189 Fits: Shadow 1100, '97-'04 Valkyrie (except Rune & Interstate) & other Late Model Hondas with choke on left handlebar control
List Price
Your Price
info
Chrome for Honda without choke on left control - see list
$87.95
$72.95
Add to cart
info
Chrome for Honda with choke on left control - see list
$87.95
$72.95
Add to cartIn stock
Kuryakyn ISO-Grips - Black
Write a reviewAdd it to your garage
Bookmark and Share

If you liked our chrome ISO-Grips then you’ll love our new Black ISO-Grips. These powder-coated black grips dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort. Get total comfort with our matching throttle bosses. These grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO� pads permit air movement for added comfort in hot weather. The knurled accent ring adds a touch of class. All grips are sold in pairs. Add the ISO Throttle BOSS for more comfort! Accent rings are available in several colors to match your bike paint theme.

Fitment:
Honda: VTX 1300 03-09, VTX 1800 02-08, Fury, Rune, VT 1100 (Aero, Spirit, Sabre), VT750 (Ace, Aero, Phantom, RS & Spirit)
             VTX1300 Custom Line 10+ (Sabre, Stateline, Interstate), VLX 96-07, Magna 94-04
Suzuki: Intruder 800/1400, S50, S83
Universal: 1" handlebars (requires removal of any ribs on OEM throttle sleeves. If you want bar end weights, 6249 is a great choice.
List Price
Your Price
info
pair - see fitment list (1" bars)
$87.95
$69.95
Add to cart
info
Black ISO-Throttle Boss for most ISO-grips (each) - fits left or right
$19.95
$17.95
Add to cart
info
Black Contoured ISO-Throttle Boss - Right Side - each
$21.95
$18.95
Add to cartIn stock
Aeromach Pistol Grip Levers
Write a reviewAdd it to your garage
Bookmark and Share

Grab a fist full when you squeeze on these pistol grip levers. They are CNC machined from extruded billet aluminum that is well polished to a high sheen. Also available in black anodized finish.

Fitment: (Honda cable clutch models) VTX1300, VT1300 Fury/Interstate/Stateline/Sabre, VT750 Shadow/Sabre/ACE/Aero/Spirit, VLX 600 & Magna

Sold as a pair.

List Price
Your Price
info
Polished for Honda\'s with cable clutch (see list) - pr
$164.95
$142.95
Add to cart
info
Black Anodized for Honda\'s with cable clutch (see list) - pr
$164.95
$142.95
Add to cart
Aeromach Flame Lever Set
Write a reviewAdd it to your garage
Bookmark and Share

The levers are CNC machined from T6 extruded billet aluminum, highly polished (looks like chrome!) and the edges of the levers are rounded so they are comfortable to squeeze. Also available in black anodized finish. These flame levers replace the factory levers easily and look great on your bike.

Fitment:
8120 is for (Honda hydraulic clutch models)
VTX1800, VT1100 Shadow's and Valkyrie
8130 is for (Honda cable clutch models) VTX1300, VT1300 Fury/Interstate/Stateline/Sabre, VT750 Shadow/Sabre/ACE/Aero/Spirit, VLX 600 & Magna

Sold as a pair.

List Price
Your Price
info
Black Anodized for Honda with hydraulic clutch (see list) - pr
$169.95
$149.95
Add to cart
info
Polished for Honda with hydraulic clutch (see list) - pr
$169.95
$149.95
Add to cart
info
Black Anodized for Honda with cable clutch (see list) - pr
$169.95
$149.95
Add to cart
info
Polished for Honda with cable clutch (see list) - pr
$169.95
$149.95
Add to cart
Kuryakyn Transformer Grips
Write a reviewAdd it to your garage
Bookmark and Share

It's hard to imagine any piece of cool metal feeling better in your hand. Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.

6232 is for:
  Honda: VTX 1300/1800, Fury, Rune, VT1100, VT750 (Ace, Aero, Phantom, RS & Spirit), VT 1300 Custom Line (Sabre, Stateline, Interstate), VLX, Magna
  Suzuki: Intruder 800/1400, S50, S83
  Universal: 1" handlebars (requires removal of any ribs on OEM throttle sleeves. If you want bar end weights, 6249 is a great choice.

List Price
Your Price
info
Pair for Honda, Suzuki, bikes with 1" bars - see fitment list
$97.95
$79.95
Add to cartIn stock
info
Throttle Boss for Transformer Grip (each) fits either side
$18.95
$15.95
Add to cartIn stock
Kuryakyn ISO-Flame Grips
Write a reviewAdd it to your garage
Bookmark and Share

Kuryakyns's new ISO�-Flame Grips have a unique flamed pattern in the soft and cushy rubber pads. Finished off with a Maltese Cross emblazoned end cap and trim ring for that additional bad attitude look. This grip accepts the wildly popular ISO-Throttle boss, which greatly aids your hand on those long rides to the next rally. Sold in Pairs

Fitment:
Honda: VTX 1300/1800, Fury, Rune, VT750 (Ace, Aero, Phantom, RS & Spirit), VT 1300 Custom Line 10+ (Sabre, Stateline, Interstate)
Suzuki: Intruder 800/1400, S50, S83
Universal: 1" handlebars (requires removal of any ribs on OEM throttle sleeve).

If you want bar end weights, 6249 is a great choice. Accessories (end caps, trim rings, et al) sold separately.

List Price
Your Price
info
Chrome (pr) see fitment list
$87.95
$69.95
Add to cart
info
ISO-Throttle Boss for most ISO-Grips (each)
$20.95
$16.95
Add to cartIn stock
info
Extended ISO-Throttle Boss (1/4" wider) for ISO-Grips - not HD (each)
$22.95
$17.95
Add to cart
info
Contoured ISO-Throttle Boss - Left Side - each
$21.95
$17.95
Add to cart
info
Contoured ISO-Throttle Boss - Right Side - each
$21.95
$17.95
Add to cartIn stock
Bookmark and Share

Sinister Zombie™ or conservative Grooves? This is the only decision you will have to make when installing these direct replacement wide levers. With contoured finger pockets & a small center rib, you will have a positive pull when clutching & braking with reduced finger pressure. Match these to other Zombie™ or Grooved products & achieve that truly finished look.

7411 is for Honda's with cable operated clutches: Fury, VT1300 Custom Line (Sabre, Stateline, Interstate), VTX1300, VT750 (all models including: Aero, Spirit, Phantom, RS), 95-07 Shadow VT1100/C/C2/C2-2/T, CB750, Magna 750, Nighthawk CB750, and VLX

7412 is for Honda's with Hydraulic Clutches: VTX1800, 85-96 Shadow VT1100C and Valkyrie (except Rune) - NOT for Goldwings!

List Price
Your Price
info
Pair for Honda\'s with cable operated clutches - see list (1988-present)
$86.95
$69.95
Add to cartIn stock
info
Pair for Honda\'s with Hydraulic Clutches - see list (1985-present)
$86.95
$69.95
Add to cart
Kuryakyn Wide Style Levers
Write a reviewAdd it to your garage
Bookmark and Share

These chrome levers are wider & more comfortable than stock. Let us just say - replace your stock levers today!

7421 Fits: Honda Models with Cable Operated Clutch (pr)
’88-’07 Shadow VT600 Models
’98+ Shadow VT750 (All Models)
’94-’04 Magna 750
’91-’06 Nighthawk CB750
’95-’07 Shadow Models (VT1100/C2/C2-2/T)
’97-’07 Shadow VT1100C
’03-’09 VTX1300 (All Models)
’04+ Shadow VT750 Aero/Spirit/Phantom/RS
‘09+ Fury (All Models)
‘10+ VT1300 Custom Line (Sabre/Stateline/Interstate)
List Price
Your Price
info
Chrome Pair for Honda with cable operated clutch - see list (1988-present)
$41.95
$34.95
Add to cartIn stock
Baron Custom Acc. Handlebar & Riser Adapter
Write a reviewAdd it to your garage
Bookmark and Share

Converts your bike’s riser spacing to 3.50” mounting points to allow Harley style handlebars, risers and drag bars to be installed
• Innovative and unique adapter mounts through the stock riser holes in the upper triple tree
• Artfully machined with facetted edges for a stylish look from T-6061 Billet Aluminum
• Hand polished and triple plated for a beautiful chrome finish
• Designed to work with risers or drag bars with 1/2"-13 threads
• Easy to follow instructions and hardware are included
• Quick and easy install

Fitment: Honda VTX 1300 and VTX 1800

List Price
Your Price
info
For VTX 1300 and VTX 1800 (all models) (2002-2009)
$109.95
$94.95
Add to cart
Kuryakyn Mechanical Throttle Cruise Assist
Write a reviewAdd it to your garage
Bookmark and Share

Enjoy those longer rides & relax your throttle hand with the Mechanical Throttle Assist. This is the simplest & cleanest looking throttle position holder available. Attaching to the end of your handlebars, this beauty looks like a bar end weight. Simply hold the throttle at desired location & roll your little finger back to hold your throttle in position. The spring loaded tensioner makes it easy to set without over tightening for easy throttle shut down when needed. Add the left side for a bar end weight matched pair & ride on in comfort.

For OEM Grips & All ISO®-Grips & ISO®-Flame Grips with 7/8" or 1" handlebars. All H-D Models with 1" or 7/8" handlebars with hollow bar ends & OEM or Küryakyn ISO- & Transformer style grips (except '08-'09 Touring Models with electronic throttle, heated grips or air reservoirs in handlebars). NOT compatible with Kuryakyn Chrome style throttle bosses that screw to the end of Kuryakyn grips or other grip end accessories/weights. Note: Proper installation may require cutting or drilling a 5/8" hole in the end of the OEM grips.

Fitment:
6285 and 6288 -

      Honda: VTX1300/1800, VT1300 Custom Line (Sabre, Stateline, Interstate), VT 750/1100, VLX, Magna, Valkyrie and ST100/1300
      Kawasaki: Vulcan 900, 1600 Classic & Mean Streak. Following can not use 6288 - Vulcan 800/1500 Classic/Drifter/Nomad/Mean Streak, Nomad 1600
      Suzuki: Intruder 1500LC/C90, Volusia/C50, Marauder 800/M50, S50, Intruder 1400/S83
      Yamaha: V-Star 650 Custom & Classic
      Victory: All Kingpin, Hammer and Vegas (all models) with Kuryakyn Grips
      Universal: all models with 7/8" or 1" hollow bars with open ends (ID 5/8" or greater)

List Price
Your Price
info
Chrome for - see fitment list
$89.95
$77.95
Add to cart
info
Chrome Clutch Bar End Weight for 6285 - see fitment note
$39.95
$34.95
Add to cart
Aeromach 6" Pullback Riser
Write a reviewAdd it to your garage
Bookmark and Share
These 6 inch Pullback Handlebar Risers are designed to fit the Honda VTX 1300 Custom, replacing the stock "TBars".  A new 1" handlebar will need to be used with the Aeromach 6" risers. Can be used with Honda VTX 1300 R but not with the stock handlebar if you wish to re-use the factory clutch and brake cables. Choose a handlebar with less width and pullback than the stock handlebar to keep the stock clutch and brake cables.   For the maximum pullback, use the 35 degree bend drag bars.
List Price
Your Price
info
Chrome for VTX 1300 C
$177.95
$159.95
Add to cart
info
Chrome for VTX 1800 R/S/F and VTX 1300 R
$177.95
$159.95
Add to cart
Baron Custom Acc. Handlebar Riser Mounting Kit
Write a reviewAdd it to your garage
Bookmark and Share
Stud kits allow most Harley-style risers with standard ½” x 13 threads to be converted to mount on Honda, Yamaha, Suzuki and Kawasaki cruisers. All studs have one end that is ½”-13 x ¾” that threads into the riser’s base. The other end of the stud and the shoulder are machined to fit the triple tree of the different manufacturers.

• Includes 2 studs, 2 aircraft nuts, 2 washers and 2 jam nuts
• Studs thread into risers allowing mounting to metric triple trees
• Installation is easy and instructions are included.

Riser bolt kits have the following dimensions - check your bike for correct fitment prior to purchase:
Honda models: (12mm x 30mm stud w/10mm D x 11mm shoulder)
Bike Fitment:
  • Honda VTX 1300C (03-09)
  • Honda VTX 1300 Retro (05-09)
List Price
Your Price
info
For Honda VTX 1300 C/R (see list) (2003-present)
$21.95
$19.95
Add to cartIn stock
Barnett Classic Black Clutch Cable VTX1300R/S/T 03-09
Write a reviewAdd it to your garage
Bookmark and Share

These Classic Black lines are the highest quality available for superior look and complete protection of your bike's paint and chrome. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

FITMENT:  VTX1300R/S/T 2003-09

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Barnett Classic Black Throttle Cables VTX1300R/S/T 03-09
Write a reviewAdd it to your garage
Bookmark and Share

These Classic Black lines are the highest quality available for superior look and complete protection of your bike's paint and chrome. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: VTX1300 R/S/T 2003-09

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Barnett S.S. Clutch Cable VTX1300C
Write a reviewAdd it to your garage
Bookmark and Share

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

FITMENT:  for VTX1300C

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Barnett S.S. Clutch Cable VTX1300R/S/T
Write a reviewAdd it to your garage
Bookmark and Share

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

FITMENT:  VTX1300R/S/T 2003-09

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Barnett S.S. Throttle Cables VTX1300R/S/T
Write a reviewAdd it to your garage
Bookmark and Share

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: VTX1300 R/S/T 2003-09

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Barnett S.S. Throttle Cables VTX1300C
Write a reviewAdd it to your garage
Bookmark and Share

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

FITMENT:  for VTX1300C

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Cobra Billet Tachometer
Write a reviewAdd it to your garage
Bookmark and Share
Upshift your cruiser with another stylish necessity from Cobra. Complete with an 8,000 RPM tach, along with a chromed billet mount and easy to install instructions. With its contrasting black digits on a white face, our tach makes it a breeze to keep track of your high performance cruiser. Shift up to Cobra, you'll be glad you did.
List Price
Your Price
info
For VTX1300S/R, Ace 750, Spirt 750 (1998-present)
$311.05
$275.50
Add to cartUsually ships next day
info
For VTX 1300C/T (2002-present)
$311.05
$275.50
Add to cartUsually ships next day
Galfer Classic Black Brake Line 03-05 VTX1300S/C
Write a reviewAdd it to your garage
Bookmark and Share

Unless the item says "ships same day" next to it, these lines are made to order. It usually takes Galpher about 2 weeks to manufacture custom length cables. However, there is a rush service available! See below!

This kit is the perfect dress-up for your VTX. Instructions are included to help with the installation. This set will also replace the stock junction blocks on the front end with new polished ones.

Rush Service
With this option your cables will be manufactured in about 2 days instead of the usual 10-14 days. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Galfer to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: If you don't see the length you are looking for, please give us a call, we can get any length desired.
List Price
Your Price
info
Pick a Size
Add to cart
info
Rear - stock length
$61.95
$54.95
Add to cart
info
Rush service for one cable/line. (ex - if rushing 3 cables/lines, you will need 3 of these)
$18.95
$16.95
Add to cart
Galfer S.S. Brake Line 03-05 VTX1300S/C
Write a reviewAdd it to your garage
Bookmark and Share

Unless the item says "ships same day" next to it, these lines are made to order. It usually takes Galpher about 2 weeks to manufacture custom length cables. However, there is a rush service available! See below!

This kit is the perfect dress-up for your VTX. All lines are braided Stainless Steel covered with clear coat to protect your chrome and your paint from abrasion. Instructions are included to help with the installation. This set will also replace the stock junction blocks on the front end with new polished ones.

Rush Service
With this option your cables will be manufactured in about 2 days instead of the usual 10-14 days. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Galfer to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: If you don't see the length you are looking for, please give us a call, we can get any length desired.
List Price
Your Price
info
Pick a Size
Add to cart
info
rear - stock length
$61.95
$54.95
Add to cart
info
Rush service for one cable/line. (ex - if rushing 3 cables/lines, you will need 3 of these)
$18.95
$16.95
Add to cart
Galfer S.S. Brake Line 05+ VTX1300R
Write a reviewAdd it to your garage
Bookmark and Share

Unless the item says "ships same day" next to it, these lines are made to order. It usually takes Galpher about 2 weeks to manufacture custom length cables. However, there is a rush service available! See below!

This kit is the perfect dress-up for your VTX. All lines are braided Stainless Steel covered with clear coat to protect your chrome and your paint from abrasion. Instructions are included to help with the installation. This set will also replace the stock junction blocks on the front end with new polished ones.

Rush Service
With this option your cables will be manufactured in about 2 days instead of the usual 10-14 days. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Galfer to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: If you don't see the length you are looking for, please give us a call, we can get any length desired.
List Price
Your Price
info
Pick a Size
Add to cart
info
rear - stock length
$61.95
$54.95
Add to cart
info
Rush service for one cable/line. (ex - if rushing 3 cables/lines, you will need 3 of these)
$18.95
$16.95
Add to cart
Kewlmetal Non-Slip Grip
Write a reviewAdd it to your garage
Bookmark and Share

These Absolutely Gorgeous CNC cut Billet Grips are the newest, slickest billet grips on the market bar none!!!! They are RUBBER ISOLATION MOUNTED. They're easy to remove and re-installed without glue or set screws that can come loose.

Once you put these on in place of your old rubber grips, you won’t believe what a different look your bike will have, and because they are Rubber Mounted, they are VERY comfortable.

NOTE: These work perfectly with the Breakaway Cruise Control.

Fits ALL VTX, 04-05 Shadow Aero 750, 00-05 Shadow Spirit 750, 04-05 Rune, 02-05 Road Star Warrior, 95-05 Intruder 1400/Boulevard S83.

List Price
Your Price
info
for all VTX, Shadow Spirit 750, Rune, Warrior, Intruder 1400/S83
$189.95
$168.95
Add to cart
Kuryakyn Master Cylinder Cover
Write a reviewAdd it to your garage
Bookmark and Share

As cool as the new Cruisers are, the handlebar controls leave a lot to be desired in the looks department. Our handlebar brake Master Cylinder Cover cures the problem in short order. Installation is quick & neat right over the stock lid. It's easy & it's cool!

Fits: Honda: All '03-'09 VTX1300, all '02-'08 VTX1800 (right side only), '99-'07 Shadow 1100, '99+ Shadow 750 Ace/Aero/Spirit/Phantom/RS, '99-'07 VLX600 Deluxe, '00-'07 VLX600, & '00-'03 Valkyrie

List Price
Your Price
info
use 9187 (1999-present)
$99.99
$99.99
Add to cartIn Stock
info
Chrome for Honda - see fitment list
$42.95
$36.95
Add to cartIn stock
Kuryakyn Clutch Perch Cover
Write a reviewAdd it to your garage
Bookmark and Share

A great addition to the rest of our products to cover your hand controls. Details is often the difference between good and great. Our new perch covers fit in that category! Installation is quick and easy. Sold each.

Fits: ‘10+ VT1300 Custom Line (Sabre/Stateline/Interstate), ‘09+ Fury, All ’03-’09 VTX1300, ‘99+ Shadow 750 Ace/Aero/ Phantom/RS/Spirit, & ‘99-’07 Shadow 1100 Sabre/Spirit

List Price
Your Price
info
Chrome for VTX1300, VT 750/1100/1300, Fury - see list (1999-present)
$59.95
$50.95
Add to cart
Kuryakyn Accessory Switches for Reservoir Cover
Write a reviewAdd it to your garage
Bookmark and Share

Keep control of your accent lighting & additional motorcycle accessories at the tip of your fingers with these master cylinder Accessory Switches.  Rated for 12V & up to 10 Amp Accessories each, these swithces add convenience & style to controlling those extras you add to your motorcycle.

Fitment List:

Honda: All GL 1500/1800, all VTX 1800/1300, 09+ Fury, 10+ VT1300 Custom Line (Sabre, Stateline, Interstate), '96-'07 VLX600, '01+ 750 Ace/Aero/Spirit/Phantom/RS/Ace Deluxe, '96-'04 Magna, '97-'99 1100 Ace Tourer, '98-'07 1100 Aero/Sabre/Spirit, '97-'04 Valkyrie (except Rune)
Yamaha: '96-'01 Royal Star, '02 Royal Star Venture, '99+ Road Star 1600/1700, '02+ Road Star Warrior

List Price
Your Price
info
Chrome for Yamaha/Honda (see fitment list) Sold each
$87.95
$69.95
Add to cart
LA Choppers Handlebar Riser Mounting Kit
Write a reviewAdd it to your garage
Bookmark and Share
Stud kits allow most Harley-style risers with standard ½” x 13 threads to be converted to mount on Honda, Yamaha, Suzuki and Kawasaki cruisers. All studs have one end that is ½”-13 x ¾” that threads into the riser’s base. The other end of the stud and the shoulder are machined to fit the triple tree of the different manufacturers.

• Includes 2 studs, 2 aircraft nuts, 2 washers and 2 jam nuts
• Studs thread into risers allowing mounting to metric triple trees
• Installation is easy and instructions are included.

Riser bolt kits have the following dimensions - check your bike for correct fitment prior to purchase:
Yamaha and some Suzuki models: (12mm x 20mm stud w/14mm D x 37mm shoulder)
Honda models: (12mm x 30mm stud w/10mm D x 11mm shoulder)
Kawasaki models: (10mm x 30mm stud w/10mm D x 11mm shoulder)
Bike Fitment:
  • Honda VTX 1300C (03-09)
  • Honda VTX 1300 Retro (05-09)
List Price
Your Price
info
For Honda VTX 1300 C/R (see list) (2003-present)
$21.95
$19.95
Add to cart
Lightning Perf. Prod. Adapter Kits for Risers and T-Bars
Write a reviewAdd it to your garage
Bookmark and Share
  • Bolt kits for threaded risers and T-bars
  • Custom-made to fit the machines listed
  • Fit Euro-style risers and T-bars with 1/2"-13 threads
Fits: sll VTX 1300/1800
List Price
Your Price
info
Bolt Kit For VTX 1300/1800
$32.95
$29.95
Add to cartUsually ships next day
Rivco Retro Style Risers
Write a reviewAdd it to your garage
Bookmark and Share

This set of risers replaces the originals and will bring the handlebars up 1" and back toward the rider 2". While it may not sound like a lot, the 2" gives you a much more upright seating position rather than reaching over the gas tank. This will significantly reduce back, neck and shoulder fatigue. They are machined from billet aluminum and are triple chrome-plated. Retains stock cables and hoses. These risers use the original caps from the bike.This set of risers replaces the originals and will bring the handlebars up 1" and back toward the rider 2". While it may not sound like a lot, the 2" gives you a much more upright seating position rather than reaching over the gas tank. This will significantly reduce back, neck and shoulder fatigue. They are machined from billet aluminum and are triple chrome-plated. Retains stock cables and hoses. These risers use the original caps from the bike.


List Price
Your Price
info
Aluminum Polished for VTX1300 R/S (2002-present)
$144.95
$128.95
Add to cart
Bookmark and Share
This set of risers replaces the originals and will bring the handlebars up 1" and back toward the rider 2". While it may not sound like a lot, the 2" gives you a much more upright seating position rather than reaching over the gas tank. This will significantly reduce back, neck, and shoulder fatigue. They are machined from billet aluminum and retain the stock cables and hoses.
List Price
Your Price
info
for VTX1300 C (2003-present)
$159.95
$142.95
Add to cart
Bookmark and Share
The tachometer is a VDO unit manufactured to RIVCO's specs for the VTX. This high quality unit has a 240 degree needle sweep, black face with white numbers and is back lit. The bullet shaped rear housing and mounting plate are CNC machined from billet aluminum. The finish is triple chrome-plated. Installs in 20 minutes. Comes with all hardware, wiring and detailed full color instructions.
List Price
Your Price
info
For VTX 1300R/S (2003-present)
$319.95
$297.95
Add to cart
Russell Stainless Steel Brake Lines
Write a reviewAdd it to your garage
Bookmark and Share
  • Custom looks and superior braking power from Russell
  • Stainless steel brake line kits add bite to your brakes and style to your ride
  • Kits contain all parts necessary for a complete brake-line swap
  • Teflon inner liner
  • Stock length
List Price
Your Price
info
For VTX 1300C Front (2003-present)
$47.95
$42.75
Add to cartUsually ships next day
info
For VTX 1300C Rear (2003-present)
$89.95
$79.99
Add to cartUsually ships next day
Russell Renegade Brake Line Kits
Write a reviewAdd it to your garage
Bookmark and Share
  • Custom looks and superior braking power from Russell
  • Stainless steel brake line kits add bite to your brakes and style to your ride
  • Featres Twilight Black finish; abrasion-resistant to protect painted surfaces
  • Kits contain all parts necessary for a complete brake-line swap for each model listed (OEM configuration replacement three-line system)
  • Teflon inner liner
List Price
Your Price
info
For VTX 1300C Front (2003-present)
$54.95
$48.95
Add to cartUsually ships next day
info
For VTX 1300C Rear (2003-present)
$126.95
$114.66
Add to cartUsually ships next day
Bookmark and Share

his custom designed riser package works perfectly with the built-in riser stems of your factory VTX-1300C bars! No need to replace handlebars to use risers and get more rise and pullback for your VTX-1300C, simply install our kit on your bars for increased comfort.

This kit provides approximately 1-3/4" rise and an additional 1-1/2" of pullback for your factory bars. Easy to install, supplied with all hardware needed for installation, designed to match all factory contours and alignment features, and polished to a mirror finish.

  • Manufactured in our CNC facility in Zebulon NC USA
  • Fabricated from the best aircraft aluminum
  • CNC machined to exacting specifications
  • Works with stock cables & hoses
  • Easy to install!

List Price
Your Price
info
for VTX1300C
$89.95
$79.95
Add to cart
Show Chrome Heated Grips.
Write a reviewAdd it to your garage
Bookmark and Share

Heated Grips are a perfect way to keep your hands warm while riding during cold weather conditions. Chrome ABS switch. Comfortable,warm, durable non-slip grips allow the rider to vary the degree of warmth with the variable position Hi/Med/Lo/Off rheostat switch.

Fitment: For Honda Cruisers with 1" bars and 5 1/2" grip length (pr)

List Price
Your Price
info
For Honda Cruisers with 1" bars and 5 1/2" grip length (pr) (1990-present)
Save 20%
$92.95
$74.95
Add to cart
Honda Master Cylinder Cap.
Write a reviewAdd it to your garage
Bookmark and Share
Complements entire line of Neo-Retro accessories.


List Price
Your Price
info
Chrome Billet. For VTX 1300/1800
$47.95
$43.95
Add to cartUsually ships in 7 days
Honda Master Cylinder Cap (V Design).
Write a reviewAdd it to your garage
Bookmark and Share
Chrome-plated accent features uniquie "V" design. Packaged individually.


List Price
Your Price
info
Chrome Billet. For VTX 1300/1800
$47.95
$43.95
Add to cartUsually ships in 7 days
Show Chrome Comfort Heated Grip.
Write a reviewAdd it to your garage
Bookmark and Share

A totally unique heated grip based on their popular Comfort Grip line. These heated grips are CNC machined, cast aluminum with a brilliant chrome finish for a great look and durability. Chrome Heated Comfort Grips are ergonomically designed and have symmetrical vibration damping rubber inserts with a convex profile to fit the palm of your hand for unsurpassed comfort while riding. The variable position rheostat switch gives the rider ultimate control over the degree of warmth produced. This is the perfect way to keep your hands comfortably warm while riding during cool to inclement weather conditions. The control switch for cruisers easily installs on any 1” handlebar in a convenient position of the rider's choice. These Chrome Heated Comfort Grips will transform the way you think about heated grips.

Fitment: most Honda cruisers with 1" handlebars.

For extra comfort on those long rides use Comfort Wrist Cruis™ (BB17-379C) on the right or left side (sold each).

List Price
Your Price
info
Chrome Kit (grips & controller) for Honda Cruisers with 1" Handlebars
Save 25%
$249.95
$189.95
Add to cart
info
Comfort Wrist Cruise for Show Chrome Comfot Grips only (EACH)
$20.95
$17.95
Add to cartIn stock
All Balls Racing Steering Stem Bearings.
Write a reviewAdd it to your garage
Bookmark and Share
  • Designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings (where ball-type bearings are used by the OEM)
  • Designed as a replacement taper bearing seat (where taper bearings are original equipment)
  • Kits come complete with both upper and lower taper bearing cups and cones and seals (both top and bottom seals are included in most kits, if applicable)
  • Tapered roller bearings decrease maintenance along with less wear and longer life
List Price
Your Price
info
For VTX 1300/1800, Valkyrie, ACE 750/1100, VT750 98+, GL1500
$36.95
$31.95
Add to cartIn Stock
Bookmark and Share

This handlebar hands you both style and comfort. A slightly higher, more comfortalbe position toward the rider and a 2" (5cm) pull back location create a sweet-looking, relaxed ride. Requires Brakeline Kit (PN:1911358 or 1911359) when used on Hammer.

Fitment: 2003+ Hammer, Kingpin, 8 Ball, Vegas, Jackpot, Judge (all cruisers with 130mm riser spacing)

Can also be used on other models that have 130mm spacing (VTX1300/1800)

List Price
Your Price
info
Chrome - for riser spacing of 130mm (Victory and VTX) (2003-present)
$419.95
$379.95
Add to cart
Highway Hawk Wide Levers.
Write a reviewAdd it to your garage
Bookmark and Share

Wide blade levers for comfort (great for smaller hands too!)

Fit: most Hondas:
VT125 SHADOW,
VT600C, VLX,
VF750C '93-UP, VT750C2 ACE '98-'01, VT750C4, VT750C4 SHADOW, VT750C5, VT750C5 SHADOW, VT750C6, VT750C6 SHADOW, VT750C SHADOW '07-UP, VT750DC BLACK WIDOW '01-'03, VT750 SPIRIT, '07-UP, VT750C BLACK SPIRIT, VT750C PHANTOM, VT750C2B BLACK SPIRIT '10-UP, VT750C2B PHANTOM '10-UP, VT750C SHADOW AERO, VT750S,
VT1100C2 ACE, VT1100 SABRE,
VTX1300R, VTX1300S,
FURY VT1300CX

List Price
Your Price
info
Pair for most Honda Cruisers (see list)
$39.95
$31.95
Add to cartIn stock
Bikers Choice Polar Hands.
Write a reviewAdd it to your garage
Bookmark and Share

Tired of cold hands when riding? These are wind proof and water proof!!

Slot openings for mirrors and cables; tapers down to a Velcro closure. The outside is made of water/wind proff nylon and hte inside is quilted insulated nylon. Has a plastic support to prevent sagging or closing while riding.

Available in black only.

List Price
Your Price
info
Black for all motorcycles
Save 32%
$57.95
$39.95
Add to cartN/A
Honda Left Handlebar Bracket for Clutch.
Write a reviewAdd it to your garage
Bookmark and Share

This is the OEM replacement - the mirror and clutch lever (cable clutch) attach to it. The back side clamp (facing rider) is sold separately.

This fits most Honda Cruisers with a cable clutch - 1988 - 2007 VLX, VT1100, Vf750 Magna, VT750 Shadow/ACE/AERO/Sabre/Spirit, VTX1300; 2010+ Fury

Note: Only for cable clutch - and there are a few exceptions for CA models - contact us if you need verification this is the right one for you.

Need other parts - let us know and we'll find it for you!

List Price
Your Price
info
For most Honda cruisers with cable clutch (see fitment list)
$34.95
$31.95
Add to cartUsually ships in 7 days
Kuryakyn Accessory Switches for Reservoir Cover.
Write a reviewAdd it to your garage
Bookmark and Share

Keep control of your accent lighting & additional motorcycle accessories at the tip of your fingers with these master cylinder Accessory Switches.  Rated for 12V & up to 10 Amp Accessories each, these swithces add convenience & style to controlling those extras you add to your motorcycle.

Fitment List:

Honda: All GL 1500/1800, all VTX 1800/1300, 09+ Fury, 10+ VT1300 Custom Line (Sabre, Stateline, Interstate), '96-'07 VLX600, '01+ 750 Ace/Aero/Spirit/Phantom/RS/Ace Deluxe, '96-'04 Magna, '97-'99 1100 Ace Tourer, '98-'07 1100 Aero/Sabre/Spirit, '97-'04 Valkyrie (except Rune)
Yamaha: '96-'01 Royal Star, '02 Royal Star Venture, '99+ Road Star 1600/1700, '02+ Road Star Warrior

List Price
Your Price
info
Chrome for Yamaha/Honda (see fitment list) Sold each
$87.95
$69.95
Add to cart
Baron Custom Acc. X Bar (Starbar).
Write a reviewAdd it to your garage
Bookmark and Share

This bar will help relieve the discomfort and pain most riders have in the neck, shoulder and back by providing the rider the ability to relax his shoulders and move their elbows down towards their side. The bar's flattrack racer styling lends itself well to the VTX’s aggressive looks and size. The special bends and tubing length provide a rider with additional leverage making the bike easier to control at any speed.

Dimensions: Diameter: 1", Width: 34-1/2", Rise: 4", Pullback: 11-1/2" - Fits with all stock control lines.

Fitment:
Honda VTX1300 Retro, VTX1800F/N/R/S
V-Star 1300
universal for most bikes

List Price
Your Price
info
For VTX 1300/1800 and V-Star 1300 and other models (see fitment list) (2002-present)
$119.95
$107.95
Add to cartUsually ships next day
Baron Custom Acc. Xtreme Bars.
Write a reviewAdd it to your garage
Bookmark and Share

This handlebar uses the Rad'ius Bar bend while incorporating 1-1/2" diameter tubing to suit the massive size of the VTX and M109. Ergonomically designed to offer the rider more leverage and widened to provide more control. Features radius bends in the risers to place the bar in a more comfortable position than conventional drag bars. Bolts directly to your upper triple tree and accepts all stock handlebar controls. This handlebar uses the Rad'ius Bar bend while incorporating 1-1/2 diameter tubing to suit the massive size of the VTX. Ergonomically designed to offer the rider more leverage and widened to provide more control. Features radius bends in the risers to place the bar in a more comfortable position than conventional drag bars. Bolts directly to your upper triple tree and accepts all stock handlebar controls.

A unique Speedo mount (VTX) or Tach mount (M109) is available that allows the stock speedo/tach to be attached to the risers and adjusted to different heights to suit the rider's preference. Available separately. Photo shows speedometer mount #BA-7367-00

Dimensions: Dia. 1.5", Width 33", Rise 7-1/2", Pullback 7-1/2"  (riser spacing 130mm)

Fitment:
    Honda: VTX1300C/R, VTX1800C/N/R
    Suzuki: M109R

List Price
Your Price
info
For VTX1800 C/R/N, VTX1300 C/R and M109 (2002-present)
$319.95
$289.95
Add to cartUsually ships next day
info
Speedo Mount for Xtreme Bar on VTX1800 (2002-2010)
$137.95
$119.95
Add to cartUsually ships next day
info
Tach mount for M109R (2006-present)
$87.95
$78.95
Add to cartUsually ships next day
Baron Custom Acc. Mini-Tach Master Cylinder Mount - Honda/Yamaha.
Write a reviewAdd it to your garage
Bookmark and Share

This beautifully chromed billet cover allows our Sub-Sonic Tach to be mounted on your front brake master cylinder or hydraulic clutch master cylinder. This cleans up your handlebar area and allows you to place the Tachometer in an easy to view location. Not just a mount, but an upgraded replacement for your stock master cylinder cover.

*Additional photos show Sub-Sonic Tachometer (#BA-7573-05, sold separately) mounted on master cylinder.

Fits the following models:
Honda:
Shadow Ace/Aero/Sabre/Spirit; VLX, VTX1300C/R; VTX 1800C/F/N/R/S
Yamaha: Road Star, Warrior, Royal Star, Venture

List Price
Your Price
info
Chrome for Honda/Yamaha (see fitment list)
$43.95
$37.95
Add to cartN/A
Baron Custom Acc. Master Cylinder Cover.
Write a reviewAdd it to your garage
Bookmark and Share

Ooh, look, flames. How cool! Just a little something to keep up that flame motiff. It's the small details that really set custom bikes apart! These covers are an eye catching way to finish off your master cylinder. Chromed billet covers cap off your master cylinders with a flashy look, adding style to a high visibility area. It's the small details that really set custom bikes apart! These covers are an eye catching way to finish off your master cylinder. Smooth chromed billet covers cap off your master cylinders with a flashy look, adding style to a high visibility area. Sold individually.

Note: Some models may require two covers.

Fitment:
Honda: Shadow Ace/Aero/Sabre/Spirit, VLX, VTX1300C/R, VTX1800C/F/N/R/S
Yamaha: Road Star, Royal Star (96-01), Venture, Warrior

List Price
Your Price
info
Chrome - Smooth for Honda/Yamaha - see list
$31.95
$27.95
Add to cartIn stock
info
Chrome - Flame for Honda/Yamaha - see list
$31.95
$27.95
Add to cartIn stock
info
Chrome - V98 for Road Star 1600 (1999-2003)
$21.95
$19.95
Add to cart
Brake Away Products BrakeAway Cruise Control.
Write a reviewAdd it to your garage
Bookmark and Share

Finally!! A mechanical throttle management device that combines, Style, Quality, and Safety. Finally!! A mechanical throttle management device that combines, Style, Quality, and Safety.

Check out what the Roadstar Magazine has to say about this product: click here for review!
  • Easy Push Button Engagement
  • Instant Front Brake or Thumb Lever Release
  • 100% C.N.C. Machined
  • Hand Polished
  • Slips over your grip for easy installation
  • Made in the U.S.A

Hand and wrist cramps have been a part of long distance motorcycling since the very beginning. Over the years, there have been a variety of products introduced to help motorcyclists manage throttle return spring tension.

Although most devices on the market today are effective in the relief of hand and wrist cramps, deactivating them requires a conscious and sometimes awkward effort. This can leave the rider feeling uneasy or even unsafe during use.

The BrakeAway Motorcycle Cruise Control is specifically designed to give the rider relief, while maintaining a feeling of control. Easy push button engagement and instant push lever disengagement eliminates any fumbling around during manual operation. While the unit is engaged, throttle adjustment is easy and smooth, allowing speed to be adjusted full range up or down with a slight turn of the throttle. These features alone would make our cruise control a nice addition to the devices on the market today, but we didn't stop there.

This quality crafted motorcycle accessory is the first and only mechanical cruise control offering instant disengagement activated by the front brake lever. Normal throttle function is returned to the rider in a split second without ever having to think about it. Imagine what that could mean in an emergency situation!

To go along with the functional advantages, there is a style that blends to the scheme of your bike from the moment you slip it over the grip. All components are C.N.C machined from the highest quality materials, including 6061-T6 aircraft quality aluminum, stainless steel, and acetyl. All aluminum components are meticulously hand polished and anodized making this cruise control a handsome and worthy addition to your street machine.

Once you've experienced the quality feel of this cruise control, you'll never want to ride without it. After all, isn't peace of mind what cruising is all about?

Fits: Honda, Kawaski, Suzuki, Yamaha and Victory cruisers with grips 1-1/2' diameter or smaller and not heated.

Slips over 1-1/4" to 1-1/2" diameter Throttle Grip - including ISO-grips. NOTE: will NOT work with any heated grips.

Will not work with Pro-One Chrome/Rubber Grips part #0630-0004

WARNING - Do not attempt to install this product on any vehicle which has not been tested, approved and listed above. BrakeAway Products Inc. and all affiliated manufacturers, dealers and or distributors will not be held liable for property damage or bodily harm resulting from any improper use, installation or application of this device.

List Price
Your Price
info
For grips up to 1-1/2 inch diameter with standard levers
$209.95
$187.95
Add to cart
info
Cam Riser Kit for Kuryakyn style wide levers
$10.95
$9.95
Add to cartIn stock
Barnett S.S. Clutch Cable VTX1300C.
Write a reviewAdd it to your garage
Bookmark and Share

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

FITMENT:  for VTX1300C

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Barnett S.S. Clutch Cable VTX1300R/S/T .
Write a reviewAdd it to your garage
Bookmark and Share

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clear coat for superior look and complete protection of your bike's paint and chrome. Clutch cables are now standard with the High Efficiency stainless steel inner wire for smoother operation and Teflon lined inner casing to provide smooth, reliable performance. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. Barnett has provided Motorcycle cables since 1948. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the ubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

FITMENT:  VTX1300R/S/T 2003-09

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Barnett S.S. Throttle Cables VTX1300R/S/T.
Write a reviewAdd it to your garage
Bookmark and Share

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

Fitment: VTX1300 R/S/T 2003-09

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Barnett S.S. Throttle Cables VTX1300C.
Write a reviewAdd it to your garage
Bookmark and Share

These Stainless steel cables and lines are the highest quality available, covered with Barnett's exclusive extruded Teflon clearcoat for superior look and complete protection of your bike's paint and chrome. The Telfon clearcoat is guaranteed to not discolor from sunlight exposure. The cable has a stainless steel inner wire and Teflon lined inner casing to provide smooth, reliable performance. Barnett has provided Motorcycle cables since 1948.

A complete replacement for cables should include both the pull (throttle) and push (idle) cables. Each cable can be ordered individually and in any custom length. Unless otherwise noted, over/under length is for the top line (where applicable).

If you don't see the desired length and/or finish- just give us a call or email us and we'll special ordered it for you! Cables are available in 4 finishes: Classic Black (Black Vinyl Finish); Stainless Braid (Stainless Steal Braided with Clear-Coat Finish); Platinum Series (Bright Silver Plated Braid with Clear-Coat Finish); and Stealth (Black Vinyl Finish with black chrome elbows and hardware). We can custom order the length and finish you need!

Tech Tip: New cables must be lubricated to work correctly. Make this job easier with the use of the "Cable Life" Cable Care Kit. The included tool makes the injection of the lubrication a snap and guarantees smooth action and longer life for your cables. Lubricate before installing makes the task even easier!

Rush Service: With this option your non-stock cables will be manufactured in about 2 days instead of the usual 10-14 days. Standard length cables are usually in stock. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Barnett to Hellriser. To use this option simply add one "Rush service" item for each cable.

FITMENT:  for VTX1300C

List Price
Your Price
info
Pick a Size
Add to cart
info
Rush service for one cable. (ex - if rushing 3 cables, you will need 3 of these)
$19.95
$16.95
Add to cartIn stock
Galfer S.S. Brake Line 03-05 VTX1300S/C.
Write a reviewAdd it to your garage
Bookmark and Share

Unless the item says "ships same day" next to it, these lines are made to order. It usually takes Galpher about 2 weeks to manufacture custom length cables. However, there is a rush service available! See below!

This kit is the perfect dress-up for your VTX. All lines are braided Stainless Steel covered with clear coat to protect your chrome and your paint from abrasion. Instructions are included to help with the installation. This set will also replace the stock junction blocks on the front end with new polished ones.

Rush Service
With this option your cables will be manufactured in about 2 days instead of the usual 10-14 days. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Galfer to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: If you don't see the length you are looking for, please give us a call, we can get any length desired.
List Price
Your Price
info
Pick a Size
Add to cart
info
rear - stock length
$61.95
$54.95
Add to cart
info
Rush service for one cable/line. (ex - if rushing 3 cables/lines, you will need 3 of these)
$18.95
$16.95
Add to cart
Galfer S.S. Brake Line 05+ VTX1300R.
Write a reviewAdd it to your garage
Bookmark and Share

Unless the item says "ships same day" next to it, these lines are made to order. It usually takes Galpher about 2 weeks to manufacture custom length cables. However, there is a rush service available! See below!

This kit is the perfect dress-up for your VTX. All lines are braided Stainless Steel covered with clear coat to protect your chrome and your paint from abrasion. Instructions are included to help with the installation. This set will also replace the stock junction blocks on the front end with new polished ones.

Rush Service
With this option your cables will be manufactured in about 2 days instead of the usual 10-14 days. Rush service applies to the manufacturing process only, please add a couple of days for shipping from Galfer to Hellriser. To use this option simply add one "Rush service" item for each cable.

Note: If you don't see the length you are looking for, please give us a call, we can get any length desired.
List Price
Your Price
info
Pick a Size
Add to cart
info
rear - stock length
$61.95
$54.95
Add to cart
info
Rush service for one cable/line. (ex - if rushing 3 cables/lines, you will need 3 of these)
$18.95
$16.95
Add to cart
Kewlmetal Non-Slip Grip, w/ KewlLock.
Write a reviewAdd it to your garage
Bookmark and Share

Non-Slip Kewl Grip, with integrated  KewlLock.

These Absolutely Gorgeous CNC cut Billet Grips are the newest, slickest billet grips on the market bar none!!!! They have integrated Kewlock helmet locks in the tips !!!! They are RUBBER ISOLATION MOUNTED. They're easy to remove and re-installed without glue or set screws that can come loose.

Once you put these on in place of your old rubber grips, you won’t believe what a different look your bike will have, and because they are Rubber Mounted, they are VERY comfortable.

NOTE: These work perfectly with the Breakaway Cruise Control.

Fits ALL VTX, 04-05 Shadow Aero 750, 00-05 Shadow Spirit 750, 04-05 Rune, 02-05 Road Star Warrior, 95-05 Intruder 1400/Boulevard S83.

List Price
Your Price
info
for all VTX, Shadow Spirit 750, Rune, Warrior, Intruder 1400/S83
$249.95
$227.95
Add to cartUsually ships next day
Kuryakyn Transformer Grips.
Write a reviewAdd it to your garage
Bookmark and Share

It's hard to imagine any piece of cool metal feeling better in your hand. Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft black rubber inlays absorb vibration & provide comfort for miles on end. Transformer Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.

6232 is for:
  Honda: VTX 1300/1800, Fury, Rune, VT1100, VT750 (Ace, Aero, Phantom, RS & Spirit), VT 1300 Custom Line (Sabre, Stateline, Interstate), VLX, Magna
  Suzuki: Intruder 800/1400, S50, S83
  Universal: 1" handlebars (requires removal of any ribs on OEM throttle sleeves. If you want bar end weights, 6249 is a great choice.

List Price
Your Price
info
Pair for Honda, Suzuki, bikes with 1" bars - see fitment list
$97.95
$79.95
Add to cartIn stock
info
Throttle Boss for Transformer Grip (each) fits either side
$18.95
$15.95
Add to cartIn stock
Bookmark and Share

Combining great style and comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO-pads permit air movement for added comfort in hot weather. All grips are sold in pairs.

Add the ISO-Throttle BOSS for more comfort! Other grip accessories (trim rings, end caps, end wieghts, etc) sold separately.

Fitment:
Honda: VTX 1300/1800, Fury, Rune, VT750 (Ace/Aero/Phantom/RS/Spirit), VT 1300 Custom Line (Sabre/Stateline/Interstate)
Suzuki: Intruder 800/1400, S50, S83
Universal: 1" handlebars (requires removal of any ribs on OEM throttle sleeves.
List Price
Your Price
info
Chrome ISO-Grips - Pair - see fitment list
$87.95
$69.95
Add to cartIn stock
info
ISO-Throttle Boss for most ISO-Grips (each)
$20.95
$16.95
Add to cartIn stock
info
Extended ISO-Throttle Boss (1/4" wider) for ISO-Grips - not HD (each)
$22.95
$17.95
Add to cart
info
Contoured ISO-Throttle Boss - Right Side - each
$21.95
$17.95
Add to cartIn stock
info
Contoured ISO-Throttle Boss - Left Side - each
$21.95
$17.95
Add to cart
Kuryakyn Zombie Levers.
Write a reviewAdd it to your garage
Bookmark and Share

Sinister Zombie™ or conservative Grooves? This is the only decision you will have to make when installing these direct replacement wide levers. With contoured finger pockets & a small center rib, you will have a positive pull when clutching & braking with reduced finger pressure. Match these to other Zombie™ or Grooved products & achieve that truly finished look.

7411 is for Honda's with cable operated clutches: Fury, VT1300 Custom Line (Sabre, Stateline, Interstate), VTX1300, VT750 (all models including: Aero, Spirit, Phantom, RS), 95-07 Shadow VT1100/C/C2/C2-2/T, CB750, Magna 750, Nighthawk CB750, and VLX

7412 is for Honda's with Hydraulic Clutches: VTX1800, 85-96 Shadow VT1100C and Valkyrie (except Rune) - NOT for Goldwings!

List Price
Your Price
info
Pair for Honda\'s with cable operated clutches - see list (1988-present)
$86.95
$69.95
Add to cartIn stock
info
Pair for Honda\'s with Hydraulic Clutches - see list (1985-present)
$86.95
$69.95
Add to cart
Kuryakyn Wide Style Levers.
Write a reviewAdd it to your garage
Bookmark and Share

These chrome levers are wider & more comfortable than stock. Let us just say - replace your stock levers today!

7429 fits Honda Models with Hydraulic Clutch: VTX1800, 85-96 Shadow VT1100C and Valkyrie (except Rune) - NOT for Goldwings!

List Price
Your Price
info
Chrome Pair for Honda with Hydraulic Clutch - see list (1985-present)
$41.95
$34.95
Add to cartIn stock
Bookmark and Share

Available in 3 sizes with a variety of finishes.

PhatRiser I handlebar risers raise the bars 1.5" and put your grip point 2" closer to you. Works with original cables/hoses, in most installations.

PhatRiser II handlebar risers raise the bars 1" above that of the OEM Honda mount, and pulls your grips back 1.5" closer to you. Works with original cables/hoses, but may require you to reroute them behind the triple tree in some applications (simple instructions included for this).

PhatRiser III handlebar risers are the Phattest of the Phat! Approximately 8" (see the comparison chart in the pics above). These usually require overlength cables/hoses.

Fitment: VTX1800R/S/N and VTX1300R/S/N  NOT for use with risers with inside wiring.

  • Available in Black Powder Coat, MicroPolished, Chrome, and Flamed!
  • CNC Machined from solid 6061-T6 billet bar stock for strength and unmatched quality.
  • A direct bolt-on accessory that works with the original hoses/cables in most applications.
  • Instructions included for easy rerouting of cables if needed.
  • Designed, manufactured, and tested in our shops for perfect fit on every bike model.
  • New Phlame design available for most models!
  • Made in USA

List Price
Your Price
info
Polished PhatRiser I for VTX1800R/S/N & VTX1300R/S/N
$115.98
$104.95
Add to cart
info
Black PhatRiser I for VTX1800R/S/N & VTX1300R/S/N
$115.98
$104.95
Add to cartIn stock
info
Chrome PhatRiser I for VTX1800R/S/N & VTX1300R/S/N
$143.63
$134.95
Add to cart
info
Flame (chrome) PhatRiser I for VTX1800R/S/N & VTX1300R/S/N
$163.21
$149.95
Add to cart
info
Polished PhatRiser II for VTX1800R/S/N & VTX1300R/S/N
$125.49
$114.95
Add to cart
info
Black PhatRiser II for VTX1800R/S/N & VTX1300R/S/N
$125.49
$114.95
Add to cartIn stock
info
Chrome PhatRiser II for VTX1800R/S/N & VTX1300R/S/N
$149.32
$139.95
Add to cart
info
Flame (chrome) PhatRiser II for VTX1800R/S/N & VTX1300R/S/N
$169.95
$154.95
Add to cart
info
Polished PhatRiser III for VTX1800R/S/N & VTX1300R/S/N
$141.68
$129.95
Add to cart
info
Black PhatRiser III for VTX1800R/S/N & VTX1300R/S/N
$141.68
$129.95
Add to cart
info
Chrome PhatRiser III for VTX1800R/S/N & VTX1300R/S/N
$178.86
$164.95
Add to cart
Notification
Close Window

Thank you for using our Website. We noticed that you are using the Internet Explorer 6 (IE6) browser. Browsers are constantly updated to support the new Web standard and, unfortunately, IE6 is now more than 7 years old.

We work hard to give you the best Web experience possible but IE6 is simply too old to work with current Web standards. Fortunately for you the solution is simple, free and easy to apply. We suggest that you upgrade your browser to the free Firefox.
For your convenience here is the link to the Firefox website where you can download the free browser:

FireFox is more than twice as fast as IE6, and much, much safer.
You can continue to use our site with IE 6 and make purchases with it. Just be aware that occasionally IE6 will be unable to show some elements correctly.