Universal Load Equalizer for use when stock turn signals are replaced with L.E.D. or other low-draw lights. Universal Load Equalizer for use when stock turn signals are replaced with L.E.D. or other low-draw lights.

Replacement turn signal lenses.Replacement turn signal lenses.

Designed expressly for installing the Silver Bullets or Mini Bullets on Metric Cruiser fender struts. This kit makes it easy! Specialized hollow mounting studs are 3/8"-16 on one end to thread into the light body and M8-1.25 on the other end to install in place of a fender strut mounting bolt on most metric cruisers. Light sold separately, select from any of the Silver Bullets with 3/8"-16 hollow mounting bolts or any of our L.E.D. Mini Bullets.

M8-1.25 is very common oh Honda, Kawasaki, Suzuki, and Yamaha fender struts, but you should confirm the suitability of this kit before ordering.
The subframe portion is long enough to work with sissy bars and has to be cut at the right length to avoid inetrference with the rear tire.

Universal Silver Bullets can be installed just about anywhere. They include minimal mounting hardware, but with a little ingenuity, they will fill the bill in applications they don't cover with complete kits. The Kuryakyn P-Clamp works great to attach silver bullets to engine guards or frame tubes! Universal Silver Bullets can be installed just about anywhere. They include minimal mounting hardware, but with a little ingenuity, they will fill the bill in applications they don't cover with complete kits. The Kuryakyn P-Clamp works great to attach silver bullets to engine guards or frame tubes!

• Amber LED are a dual circuit so they can be wired to function as running lights and turn signals when used in front applications.
• Red Led Silver bullets are single circuit intended for rear applications as turn signals only.
• Colored lenses are available but do not change the color emitted
• Halogen kits include 35 watt bulbs with Red, Amber, and Clear lenses.
• L.E.D. kits have clear lenses; the color is emitted by the L.E.D. circuit board.
• Small Bullets measure 2 7/8", 1 5/8" diameter
• Large Bullets measure 4", 2 5/16" diameter
• Not D.O.T. approved.
• Halogen Silver Bullets have a single power wire and ground through their mount.
• Red led Silver Bullets have two wires, power and ground, and should be wired to operate as turn signal only unless used with the Kuryakyn run-turn-brake controller (PN 4710)
• Amber L.E.D. Silver Bullets have three wires, low, bright and ground so they can be wired to operate as running lights and turn signals.

Note: Do not wire Halogen Silver Bullets with red lenses to operate as running lightas unless using the Kuryakyn run-turn-brake controller (PN 4710). Excessive heat MAY result in cracked lenses.
Note: Installing L.E.D. Silver Bullets as turn signals on a bike with a single turn signal indicator requires Diode Kit (PN 4709)

This Kuryakyn original looks good coming and going. From the drivers seat, they are a functional, great looking custom mirror. You can choose either flat or reduced image convex glass. Flat glass gives a more accurate representation of the distance between you and following vehicles. Convex glass provides a wider field of view and lessens the distorting effect of vibration. A heavy duty locking mechanism and swivel ball keep these mirrors adjusted just where you want them.This Kuryakyn original looks good coming and going. From the drivers seat, they are a functional, great looking custom mirror. You can choose either flat or reduced image convex glass. Flat glass gives a more accurate representation of the distance between you and following vehicles. Convex glass provides a wider field of view and lessens the distorting effect of vibration. A heavy duty locking mechanism and swivel ball keep these mirrors adjusted just where you want them.

 Get ready for the compliments when you streamline the back fender and add that custom top class look to your RoadStar. Designed to flow around your stock taillight this kit fully replaces that stock bulky turn signal AND license plate bracket.

These streamlined Constellation Driving Lights with Turn Signals really shine with their cutting-edge design.  No ancient bulky spot-lamps with large supporting cross bar here, these super bright beauties fit right in place. With H3 bulbs in a 3 inch diameter stretched, bullet housing that flows down to a coordinating 2-1/4 inch turn signal housing, these are the answer to your stylin' frontlighting. Designed to mount directly to your forks with Küryakyn Two-Piece Clamps.

Fits: Universal applications for installation with Küryakyn Two Piece Clamps (Not intended for use on motorcycles with OEM fork shrouds).

Two- Piece Fork Clamps:

2285 - 39mm (pr)

2286 - 41mm (pr)

2287 - 49mm (pr)

2275 - 54mm - 58mm (for inverted forks), not compatible with HD (pr)