Eliminate neck, shoulder and back pain, and make your bike feel like it has power steering. Baron's Starbar is engineered to provide these features, while the unique bends compliment and contour the shape of your bike.

Whether you're 5-foot or 6-foot 5-inches tall, the special shape of these bars re-angle, re-align and widen your grip. This allows your shoulders to relax and your spine to re-align, removing stress on your lower back and providing you with additional leverage and improved control positioning. Installs on most motorcycles using stock controls (Yamaha RS Venture models will require BA-7430-00 Riser Extensions).

Dimensions
Dia. 1", Width 36", Rise 4", Pullback 12-1/2"

Known Fitment
Honda: Magna, Shadow Ace/Sabre/Spirit
Kawasaki: 1500/1600 Classic, 1500 Drifter, 1500/1600 Mean Streak, 1500 Nomad, Vulcan 900 CLassic/LT
Suzuki: Intruder 800/1400, 1500LC/C90, Volusia/C50
Yamaha: Road Star 1600/1700, Royal Star 96-01, V-Star 1100 Classic/Custom, V-Star 1300, V-Star 650 Classic/Custom, Venture

Note: Honda & Suzuki models require minor drilling.
Note: V-Star 1100 will require longer cables.
 

Baron's Hot Rod Drag Bar gives you an aggressive look that will make you the Star. This thick drag bar has been specially bent and lengthened to enhance the aggressive nature of your bike while also providing additional leverage and improved grip position.

Bar is fabricated from 1-1/4” diameter cold-rolled steel, polished and chromed. Fits with stock control lines and installs quickly and easily.

Dimensions: Diameter: 1-1/4", Width: 33", Rise: 6", Pullback: 7", Riser Width: 100mm

Fitment  Road Star 1600/1700 99+, Royal Star 96-01

The radius arc softens the look of the conventional drag bar, providing a sweptback styling that emphasizes the contours of your fuel tank. The rider is provided much-improved comfort while the effort to steer and control the bike is reduced. The large-diameter tubing is well suited to today’s cruisers, and its thick walls reduce the vibration that causes hand and wrist fatigue.The Enferno has etched flames in the tubing surface that'll make your bike a standout!

It’s the most comfortable drag bar you will ever ride with!

Drilled for internal wiring. Fits with stock control lines and is easy to install. Dimensions: Diameter: 1-1/4", Width: 33", Rise: 7", Pullback: 9-1/2", Riser Width: 100mm

Fitment
Road Star (99+), Royal Star (96-01), V-Star 1100 Classic/Custom (99+), V-Star 650 Classic/Custom (98+), Warrior (02+)

The Bomber Bar sits low and close to the tank, enhancing the aggressive look of your bike.

Specialty bends provide additional leverage, making it easier to control your ride.

Bar is 1-1/4” diameter cold-rolled steel, polished and chromed. Fits with stock control lines and installs quickly and easily. Comes pre-drilled for internal wiring.

Dimensions: Diameter: 1-1/4", Width: 33", Rise: 4-1/2", Pullback: 5-1/2"

Fitment
Road Star (99+), Royal Star (96-01), V-Star 1100 Classic/Custom (99+), V-Star 650 Classic/Custom (98+), Warrior (02+)

The sculpted styling of this handlebar brings out the classic heritage of today’s cruisers. The specially-designed bends, length and pullback relieve the stress and pain most riders suffer in the neck, shoulders and back, while the thick-walled tubing reduces vibration to the riders hands. As well, these bars provide additional leverage and a lower center of gravity that makes the bike easier to control and feel like it has lost a couple hundred pounds. Installs easily on most bikes using all stock lines and controls.

Dimensions: Dia. 1", Width 36", Rise 4 1/2", Pullback 13 1/2"

Known fitment:
Kawasaki: Vulcan 1500/1600 Classic, 1500 Drifter, 1500 Nomad, Vulcan 900 Classic
Suzuki: Volusia/C50 1500LC/C90
Yamaha: Road Star, Royal Star (99-01), Venture, V-Star 1100 Classic/Custom, V-Star 1300, V-Star 650 Classic/Custom

Stud kits allow most Harley-style risers with standard ½” x 13 threads to be converted to mount on Honda, Yamaha, Suzuki and Kawasaki cruisers. All studs have one end that is ½”-13 x ¾” that threads into the riser’s base. The other end of the stud and the shoulder are machined to fit the triple tree of the different manufacturers.

• Includes 2 studs, 2 aircraft nuts, 2 washers and 2 jam nuts
• Studs thread into risers allowing mounting to metric triple trees
• Installation is easy and instructions are included.

Riser bolt kits have the following dimensions - check your bike for correct fitment prior to purchase:
Yamaha and some Suzuki models: (12mm x 20mm stud w/14mm D x 37mm shoulder)
Honda models: (12mm x 30mm stud w/10mm D x 11mm shoulder)
Kawasaki models: (10mm x 30mm stud w/10mm D x 11mm shoulder)

Designed to provide comfort and great style, our massive 1-1/4" rigid, sculpted tubing provides instant relief to necks, shoulders and backs. Riders around the world say these bars make it feel like they've added power steering to their bikes! The added diameter and thickness of the tubing reduces vibration that causes arm fatigue, while at the same time providing a complementary size befitting your cruiser's large styling.

Works with stock control lines on most bikes (some bikes may require rerouting of the control lines or the addition of +2" cables). Fits motorcycles with riser spacing of 3-1/2" to 4". Works well with most stock and aftermarket risers. Each handlebar is bored and dimpled to allow for internal wiring.

Dimensions: Diameter: 1-1/4", Width: 38, Rise: 5", Pullback: 13"

Kong Bar provides the bad-boy image and "old school biker" attitude but with a twist. Baron's specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control. You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control. The massive 1-1/4” tubing and the classic bad-boy biker look of these bars truly makes you a standout in the crowd.

Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s cruisers and as the best possible fit for most riders.

Each handlebar is bored and dimpled to allow for internal wiring. Requires longer control cables, but accepts all stock 1" type controls. Fits bikes with riser spacing of 3-1/2" to 4". Works with most stock and aftermarket risers. It is recommended that you check your local codes for handlebar height to be sure these bars are legal in your area.

Dimensions: Diameter: 1-1/4", Width: 37", Rise: 17", Pullback: 12", Center Width: 10"

Known Bike Fitment: (Honda & Suzuki models require minor drilling)

• Honda: Magna, Shadow Ace/Sabre/Spirit
• Kawasaki: Mean Streak, 1500 Drifter, 1500 Nomad, Vulcan 1600 Classic, Vulcan 2000, Vulcan 90
• Suzuki: Intruder 1400/S83, 800/S50, Volusia/C50, 1500LC/C90, Marauder 1600/M95
• Yamaha: Road Star 1600/1700, Royal Star 96-01, V-Star 1100 Custom/Classic, V-Star 650 Custom/Classic