Here's the perfect solution for adding cruise pegs to the VTX. This setup places the pegs in a comfortable "stretched out" location, without adding bulky engine guards to this sleek machine. These super clean mount plates simply bolt on to the existing forward controls for a sturdy, comfortable setup that is also pleasing to the eye. The Cruise Peg Mount will accept any Kuryakyn male mount peg. The stock driver peg can be retained or it can be replaced with any of Kuryakyn's pegs and adapters.These super clean mount plates simply bolt on to the existing forward controls for a sturdy, comfortable setup that is alos pleasing to the eye. Pegs sold separately.

Note: Does not work with Forward Control Extension Kit (P/N 4590).

Move your driver pegs forward and stretch your legs to a comfortable position with this Forward Control Extension Kit. Designed to relocate your stock driver controls 2� forward and add that extra comfort to your ride by taking that extra bend out of your knees.Move your driver pegs forward and stretch your legs to a comfortable position with this Forward Control Extension Kit. Designed to relocate your stock driver controls 2� forward and add that extra comfort to your ride by taking that extra bend out of your knees.

Your buds are going to envy you when they see these super custom chrome and rubber covers on your stock boards. Wow, what a difference! Quick and easy to install and economical too.Your buds are going to envy you when they see these super custom chrome and rubber covers on your stock boards. Wow, what a difference! Quick and easy to install and economical too.

Even though we offer a variety of pre-assembled, clamp-on type highway pegs, occaisonally the need arises for a combination we just don't offer. For times like this, it is a simple process to "Build Your Own". We offer all of the components we use in our kits individually. Even though we offer a variety of pre-assembled, clamp-on type highway pegs, occaisonally the need arises for a combination we just don't offer. For times like this, it is a simple process to "Build Your Own". We offer all of the components we use in our kits individually.

These highway pegs utilize Kuryakyn unique offset mount to allow riders a range of adjustment not possible with other clamp-on style highway pegs. The offset can be rotated in a 4 diameter circle to accommodate tall, short, or average height riders. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, look at our Right Angle Mounts. These highway pegs utilize Kuryakyn unique offset mount to allow riders a range of adjustment not possible with other clamp-on style highway pegs. The offset can be rotated in a 4 diameter circle to accommodate tall, short, or average height riders. These can be installed on any round tubing (frames or engine guards), but it is important to keep in mind that the footpeg itself will end up perpendicular to the bar to which it is mounted. If your engine guard is angled in such a way so that the peg will not be level once installed, look at our Right Angle Mounts.

• Yamaha engine guards are 1" diameter except Full Size/Full Loop Engine Guards which are 1.25" diameter
• Honda, Lindby, Baron's engine guards are 1.25" diameter
• Cobra's engine guards are 1.25", the Fattys are 1.5" diameter
• Kawasaki front frame tubes are 1.35" diameter
• Victory Front Frame down tubes 06+ Hammer, Jackpot, Kingpin & 8-Ball are 1.5" diameter.

Recognized as one of the best pegs on the market. Get ready to fall in love. ISO-Pegs are the industry's most comfortable footpegs. They dampen vibrations and give your scoot that custom look--all at the same time. They feature hollow-core, long-lasting neoprene rubber insert cleats which are isolastically mounted on a special grade 8 chrome socket head bolt. They have a soft, cushiony feel, and the adapter ends are interchangeable for use on early and late-model Harleys. If you're tired of broken O-rings or drab-looking stock pegs, these are for you. Recognized as one of the best pegs on the market. Get ready to fall in love. ISO-Pegs are the industry's most comfortable footpegs. They dampen vibrations and give your scoot that custom look--all at the same time. They feature hollow-core, long-lasting neoprene rubber insert cleats which are isolastically mounted on a special grade 8 chrome socket head bolt. They have a soft, cushiony feel, and the adapter ends are interchangeable for use on early and late-model Harleys. If you're tired of broken O-rings or drab-looking stock pegs, these are for you.

We've added a flamin' new style to our comfortable Switchblade Peg. The flip-out heel rest makes a huge difference on those long rides. The Flamin' Switchblade makes a great addition to our Flamin' Pegs and ISO-Flame Grips. 

Note: Flip out arm is designed to be a heel rest.

Simple and stylish, add the sleek lines of the ISO-Sweptwing Peg to streamline your bike and get ready for flight. With traditional ISO design, these beauties reduce the vibration and add that super comfortable footpeg. Add them solo or coordinate them as a matched set to the Küryakyn Swing Wing Peg.

Wondering how you can stretch your legs a little without spending hundreds of dollars for extended controls?  How about your passenger?  Feeling a little cramped?  Here's the answer... a convenient fold-forward, comfortable cruise peg that fastens in place of your stock peg. The SwingWing Peg provides a larger footpad for a fully supported feeling and has a swingout footrest arm that provides a 3" wider secondary foot position. Metric bikes need model specific adapters (sold separately).

Note: SwingWing Pegs are larger than stock. In passenger applications pegs may not fold up to stored position properly. Motorcycles with passenger peg mounts that angle to the rear also accentuate the non-folding application.

Not compatible with fairing lowers on '04 and earlier touring models.

Set your bike apart from the crowd. A full custom footpeg at a realistic price. Bet you get a bunch of compliments on these and your feet will love them too. Will be available for any H-D and many metric cruiser applications.

7939 fits front on: GL1800, M50, Volusia (01-04), M109, M90, Spyder
7946 fits front on: GL1500, Valkyrie, 1100 Ace/Tourer
8802 fits front on: Raider, V-Max 09+
8802 fits rear on: VTX1800/1300, Valkyrie, Fury, 1100 Aero/Ace/Tourer, 750 Spirit/Ace/Aero, Magna, VLX600, Rebel 250, Volusia, Rocket III
8803 fits front on: VTX1800C/F, VTX1300C, Fury, 1100 Sabre & Spirit, 750 Spirit/Ace/Aero, 750 Magna, VLX600
8805 fits rear on Kingpin w/oem mounts; front and rear on Hammer, Vegas, 8-Ball and Jackpot
8809 fits rear on: V-Star 950/1300, Warrior, Roadliner, Stratoliner, Raider
8810 fits front on: V-Star 650/1100, Virago 750/1100, V-Max '85-'08
8811 fits rear on: V-Star 250/650/1100. Virago 250/750/1100. Road Star, Royal Star w/oem pegs, V-Max '85-'08
8812 fits front on: Warrior
8820 fits front on: Intruder 1400/S83, Marauder 800
8821 first rear on: 1500LC/C90, Intruder 1400/S83, Marauder 800
8822 fits rear on: M109R
8823 fits rear on: C50, M50, M90, C109
8830 fits front on: Marauder 1600/M95 '04-'06, Vulcan 1500 A/B '87-'99, Mean Streak '02-'08, VN900 Custom 07+, VN800 Classic/Custom '96-'05
8831 fits rear on: Marauder 1600/M95 '04-'06, Vulcan 800/900/1500/1600/2000, Mean Streak, Drifter 1500
8840 fits front on: Bonneville America, Speedmaster, Rocket III
8840 fits rear on: All Bonnevilles and Speedmaster

• Put your passenger pegs anywhere you want them
• Offered in two lengths - 2" or 4"
• Both male end & clevis can be rotated 360º & lock securely when tightened
• Investment cast & chrome plated for strength & durability

Note: Stock footpegs do not work with this product. Requires Motorcycle specific Splined Adapters and Male Mount Pegs.

The all-in-one answer for long-haul comfort. We combined our most popular highway peg components into one product that’s attractive, adjustable and easy to install.

*Sold in pairs - Not compatible with Goldwings

For those of you who would like to install footboards in place of a footpeg, Küryakyn offers these variations of our eye-catching ISO-Driver or Passenger Boards. These kits include our finely chromed ISO-Boards and a cast bracket to connect the board to the slip resistant splined adapter (sold separately). Please see illustration to determine the style that best fits your application.

Fits: H-D Applications: Requires the use of P/N 8881 Splined Adapter (sold separately).
Metric Applications: Requires the use of a splined adapter for your specific model bike (sold separately).

Application note for H-D: Not recommended for use on mounts fastened to the motorcycle with only a single fastener. Leverage applied by the board will cause the mount to "twist" and loosen from the motorcycle. We recommend P/N KU-4548 Anti-Rotation Peg Mount when using these on '00-'07 Softails.

Application note for Metrics: Adjustable shift & brake linkage is suggested for driver application. Placing these footboards on mounts intended for footpegs may prohibit them from folding up in the same manner as the stock peg. While the board may be rotated on the mount for a comfortable foot position, some angles may cause the board to contact other components on the bike before the board is folded up completely. Before ordering, be aware of components on the bike that may interfere with the placement of the floorboards.

Add style & comfort in minutes by simply replacing your pegs with these radically designed Constellation Boards! Mount directly to your standard peg location & gain adjustments in almost any direction. Choose the correct Splined Adapter for your desired mounting location & ride on!

•  Floorboard measures 10" long by 4-1/2" wide. Extends back 4-3/4" from peg mount.
•  Floorboards intended to fold at mounting block, not at standard footpeg mount.
•  Both driver & passenger locations allow infinite adjustments within a 2" horizontal section. Floorboards rotate completely around splined adapter for optimal leg positioning.
• Choose between two positions when installing floorboards in the passenger location; the lower stock peg position or raised 1-1/8 inches for those shorter-legged riders.

Importance Notice: Adjustable shift & brake linkage is suggested for driver application. Placing these footboards on mounts intended for footpegs may prohibit them from folding up in the same manner as the stock peg. While the board may be rotated on the mount for a comfortable foot position, some angles may cause the board to contact other components on the bike before the board is folded up completely. Before ordering, be aware of components on the bike that may interfere with the placement of the floorboards.